Advanced Search
YI Miao, LI Tian-song, CHEN Ming-song, XU Xiang-li. Frame synchronization for multi-pulse position modulation in optical communication[J]. LASER TECHNOLOGY, 2010, 34(2): 164-167. DOI: 10.3969/j.issn.1001-3806.2010.02.006
Citation: YI Miao, LI Tian-song, CHEN Ming-song, XU Xiang-li. Frame synchronization for multi-pulse position modulation in optical communication[J]. LASER TECHNOLOGY, 2010, 34(2): 164-167. DOI: 10.3969/j.issn.1001-3806.2010.02.006

Frame synchronization for multi-pulse position modulation in optical communication

More Information
  • Received Date: December 22, 2008
  • Revised Date: March 04, 2009
  • Published Date: March 24, 2010
  • In order to solve the low efficiency problem of symbol synchronization in laser communication,a super-frame synchronization was proposed instead of symbol synchronization.On the basis of analyzing multi-pulse position moudulation (MPPM)code pattern and length,the different methods of combination Barker sequence applied in the super-frame synchronization of MPPM were analyzed, and the length of synchronization code of the different frame was calculated.The simulation results show that this method can decode the input binary bits accurately.The obtained results have theoretic reference value for the improving the performance of laser communication.
  • [1]
    ZHANG T Y,WANG H X,XIE Ch J.Symbol synchronization for pulse position modulation in optical wireless communications[J].Laser Optoelectronies Progress,2006(6):38-41(in Chinese).
    [2]
    JING L,UYSAL M.Optical wireless communications:system model,capacity and coding[J].IEEE Vehicular Technology Conference,2003,1(6/9):168-172.
    [3]
    WANG H X,ZHU Y B,ZHANG T Y,et al.Performance study of optical wireless DH-PIM and DPIM[J].Laser Technology,2007,31(1):92-94(in Chinese).
    [4]
    SUGIYMA H,NOSU K.MPPM:a method for improving the band-utilization efficiency in optical PPM[J].IEEE Journal of Lightwave Technology,1987,LT-7(3):465-472.
    [5]
    YIN L,ZHONG Sh N,CHEN Y Y,et al.An implementation of signal synchronization in underwater acoustic communication system[J].Signal Processing,2005,21(s1):448-451(in Chinese).
    [6]
    LI H B,ZHANG L.Research of combinational Barker sequence performance[J].Journal of Institute of Command and Technology,1999,4(10):16-20(in Chinese).
    [7]
    LUO R Z,CHENG X T,DING L J.A novel design method for traininq sequence with low-lobe values[J].Acta Electronica Sinica,2005,10(33):1741-1744(in Chinese).
    [8]
    QIN L.Design of MPPM in atmospheric laser communication[D].Xi'an:Xi'an University of Technology,2006:36-37(in Chinese).
  • Related Articles

    [1]TAO Xiaoqiang, LI Tianyi, XU Weizong, ZHOU Dong, REN Fangfang, LU Hai. Research on active quenching circuit based on single-photon detection of 4H-SiC APD[J]. LASER TECHNOLOGY, 2024, 48(6): 809-815. DOI: 10.7510/jgjs.issn.1001-3806.2024.06.005
    [2]LIU Zhuang, FANG Ju, LI Yuancheng, ZHANG Xiaobing. Hole shape characteristics in femtosecond laser drilling of SiC/SiC composite thick plate[J]. LASER TECHNOLOGY, 2022, 46(6): 736-741. DOI: 10.7510/jgjs.issn.1001-3806.2022.06.004
    [3]DENG Faming, GAO Tao. First principle study of electronic properties of 4H-SiC under high power laser[J]. LASER TECHNOLOGY, 2017, 41(2): 240-246. DOI: 10.7510/jgjs.issn.1001-3806.2017.02.019
    [4]GAO Dong-mei, LU Qi-rong, WEI Yan-bing, HUANG Bin. Minority carrier lifetime measurement for N-type 4H-SiC by means of the microwave photoconductivity decay method[J]. LASER TECHNOLOGY, 2011, 35(5): 610-612,631. DOI: 10.3969/j.issn.1001-3806.2011.05.010
    [5]ZHANG Yong-qiang, WANG Gui-bing. Point measurement of absorptivity of 30CrMnSiA steel at different temperature in atmosphere[J]. LASER TECHNOLOGY, 2010, 34(4): 517-519. DOI: 10.3969/j.issn.1001-3806.2010.04.023
    [6]REN Yu-song, HUA Guo-ran, LUO Xin-hua, TIAN Zong-jun, HUANG Yin-hui. Experimental research of bulk fabrication of nano-SiC ceramic powder by laser sintering[J]. LASER TECHNOLOGY, 2006, 30(4): 402-405.
    [7]ZHANG Xiao-lin. Laser training system of high reliability used in field environment[J]. LASER TECHNOLOGY, 2004, 28(3): 286-288.
    [8]Li Yuhong. Research of metal-ceramic TiC-B4C-SiC-Co laser cladding on A3 steel[J]. LASER TECHNOLOGY, 2003, 27(5): 396-397,399.
    [9]Si Songhua, Yuan Xiaomin, He Yizhu. Microstructure performance of laser clad Ni-based alloy coating with SiC ceramics particles[J]. LASER TECHNOLOGY, 2002, 26(5): 324-326.
    [10]Zhang Siyu, Wang Biben, Zheng Kequan. Study of laser smelting-cladding WC-TiC-SiC-Co on carbon steel surface[J]. LASER TECHNOLOGY, 1994, 18(2): 110-113.
  • Cited by

    Periodical cited type(2)

    1. 李玥,王燕. 飞秒激光加工Ag-TiO_2微纳结构及其光催化性能研究. 激光技术. 2022(02): 163-168 . 本站查看
    2. 高骏沣,申健,李乔敏. 基于血拉曼光谱研究食物抗癌功效的营养配餐APP. 计算机产品与流通. 2019(06): 284-285 .

    Other cited types(1)

Catalog

    Article views (1) PDF downloads (6) Cited by(3)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return