Experimental research of bulk fabrication of nano-SiC ceramic powder by laser sintering

REN Yu-song; HUA Guo-ran; LUO Xin-hua; TIAN Zong-jun; HUANG Yin-hui

Fabrication of nano-SiC bulk material by selective laser sintering technology with nano-SiC powder is achieved.The microstructure of laser-sintering nano-SiC ceramic coating is examined by means of X-ray diffraction analyses,scanning electron microscopy.At the same time,the laser sintering procedure of nano-SiC powder and effect of technique parameters are investigated.The results show that the nano-SiC powder materials can be sintered to bulk material with the proper process parameters,the crystal size of the production is almost kept the same as that of nano-SiC powder,but some power is decomposed to nano-structural silicon and nano-structural carbon.

1. College of Mechanical Engineering, Nantong University, Nantong 226006, China;

2. College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Received Date: 2005-03-19

Accepted Date: 2005-06-30

Available Online: 2006-07-25

Abstract: Fabrication of nano-SiC bulk material by selective laser sintering technology with nano-SiC powder is achieved.The microstructure of laser-sintering nano-SiC ceramic coating is examined by means of X-ray diffraction analyses,scanning electron microscopy.At the same time,the laser sintering procedure of nano-SiC powder and effect of technique parameters are investigated.The results show that the nano-SiC powder materials can be sintered to bulk material with the proper process parameters,the crystal size of the production is almost kept the same as that of nano-SiC powder,but some power is decomposed to nano-structural silicon and nano-structural carbon.

HTML

Reference (8)

[1]	HAHN H,LOGAS J,AVERBACK R S.Sintering characteristics of nanocrystalline TiO2[J].Journal of Materials Research,1990,5(2):609～614.
[2]	YOSHIMURA M,OHJI T,SANDO M et al.Rapid rate sintering of nano-grained ZrO2-based composite using pulsing pulse electric current sintering method[J].Materials Letters,1998,17(16):1389～1391.
[3]	LI Y K,JI K J,ZHONG J X et al.Microwave sintering of nano-Al2O3-ZrO (3Y) multiphase ceramics[J].Journal of the Chinese Ceramic Society,1998,26(6):740～744(in Chinese).
[4]	LI W,GAO L,GUO J K et al.Fabrication of nano 3Y-TZP by spark plasma sintering[J].Journal of Inorganic Materials,1999,14(6):985～988(in Chinese).
[5]	LI W,GAO L,HONG J Sh et al.Fabrication of nano Y-TZP by rapid hot-pressing and SPS[J].Journal of Inorganic Materials,2000,15(2):269～274(in Chinese).
[6]	HUA G R,HUANG Y H,ZHAO J F et al.Investigation on selective laser sintering of nanocrystalline ceramic powders[J].China Mechanical Engineering,2003,14(20):1766～1769(in Chinese).
[7]	HUA G R,LUO X H,HUANG Y H et al.Microstructure and corrosion characteristic of plasma-sprayed ceramic coating by laser remelting of nano-Al2O3 modifying[J].The Chinese Journal of Nonferrous Metals,2004,14(6):934～938(in Chinese).
[8]	HUA G R,HUANG Y H,ZHAO J F et al.Plasma-sprayed ceramic coating by laser cladding of Al2O3 nano-particles[J].The Chinese Journal of Nonferrous Metals,2004,14(2):199～203(in Chinese).

Experimental research of bulk fabrication of nano-SiC ceramic powder by laser sintering

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Proportional views