激光焊接塑料的方法及发展现状

刘会霞; 张惠中; 季进清; 王霄; 蔡兰

激光焊接塑料的方法及发展现状

1.
江苏大学机械工程学院镇江 212013

作者简介: 刘会霞(1964- ),女,教授,研究方向为激光加工、表面微细造型数值模拟和实验、逆向工程、数字化设计与制造技术.E-mail:lhx@ujs.edu.cn.

中图分类号: TG456.7

Methods and present status of laser welding of plastics

1.
School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013, China
CLC number: TG456.7

摘要: 首先阐述了激光焊接塑料的原理;其次介绍了几种激光焊接塑料的新方法、特点及应用对象,主要有轮廓焊接、同步焊接、准同步焊接、掩膜焊接、放射状焊接、Globo焊接和衍射焊接;最后论述了激光焊接塑料的发展现状及发展趋势。可以看出,目前研究主要集中于二维焊接,而三维焊接研究得较少。激光焊接塑料正成为激光焊接领域的一个热点,它将取代传统的塑料焊接方法。
- 激光技术 /
- 激光焊接 /
- 焊接方法 /
- 塑料 /
- 透射焊接
Abstract: First of all,the principle of laser welding of plastics is explained.Then,several new methods,characteristics and applications of laser welding of plastics are introduced,such as contour welding,simultaneous welding,quasi-simultaneous welding,mask welding,radial welding,Globo welding and diffractive welding.At last,present status and development trend of laser welding of plastics are summarized.It can be seen that the current study mainly focuses on two-dimension welding,while research on three-dimension welding is scarce.Laser welding of plastics is becoming a hot phenomenon in laser welding field.It might replace the traditional welding methods of plastics.
- laser technique /
- laser welding /
- welding methods /
- plastic /
- transmission welding

[1]	WANG J Ch.Development and expectation of laser welding technology[J].Laser Technology,2001,25(1):48-53(in Chinese).
[2]	ZHANG Sh Y.Laser welding of plastics[J].Laser & Infrared,2000,30(3):170-174(in Chinese).
[3]	CHEN G,XIA Y R,KONG L B,et al.Plastics welding technology and its application in medical product[J].Engineering Plastics Application,2003,31(9):35-38(in Chinese).
[4]	Shanghai Instituet of Laser Technology.Multidimensional equipment of laser welding of plastics:China,200420090111.8[P].2005-10-12(in Chinese).
[5]	IAN J.Laser welding for plastic components[J].Assembly Automation,2002,22(2):129-135.
[6]	CHEN J W,ZYBKO J,CLEMENTS J.Diode laser bonding of planar microfluidic devices,biomems,diagnostic chips & microarrays[C]//2005 NSTI Nanotechnology Conference and Trade Show.Cambridge:Nano Science and Technology Institute,2005:438-448.
[7]	POTENTE H,BECKER F,FIEGLER G,et al.Investigations towards application of a new technique on laser transmission welding[J].Welding Research Abroad,2002,48(3):2-7.
[8]	JANSSON A,KOUVO S,KUJANPAA V.Quasi-simultaneous laserwelding of polymers--The process and applications for mass-production[C]//24th International Congress on Applications of Lasers and Electro-Optics,ICALEO 2005.Orlando:Laser Institute of America,2005:381-387.
[9]	Leister Machining Technology Corporation.Laser welding methodsand equipment of joining plastics parts or plastics and other materials:Switzerland,99101816.9[P].2000-09-20.
[10]	CHEN J W.The third dimension:laser transmission welding[J].Kunststoffe Plast Europe,2004,94(5):86-88.
[11]	LAI J J,CHEN X Q,ZHOU H,et al.Investigation of infrared laser heating and bonding of plastics chips[J].Infrared Technology,2004,26(2):68-71(in Chinese).
[12]	YUAN H,LAI J J,HE Y G.Experimental study on laser welding of thermoplastics[J].Optics & Optoelectronic Technology,2005,3(1):18-21(in Chinese).
[13]	WANG Y L,CUI Y,WANG J Ch,et al.Technology of laser welding plastic[J].Applied Laser,2006,26(2):93-96(in Chinese).
[14]	HILTON P A,JONES I A,KENNISH Y.Transmission laser welding of plastics[J].SPIE,2003,4831:44-52.
[15]	COELHO J P,LOBATO M,ABREU M A,et al.Influence of laser spot shape on welding of thin thermoplastics[C]//Proceedings of the Laser Materials Processing Conference ICALEO 2000.Orlando:Laser Institute America,2000:73-81.
[16]	HOULT A P,BURRELL M.The effect of diode laser wavelength on the Clearweld(TM) welding process[C]//ICALEO 2002.21st International Congress on Applications of Laser Institute America.Orlando:Laser Institute America,2002:1799-1807.
[17]	GREWELL D A,ROONEY P,KAGAN V A.Relationship between optical properties and optimized processing parameters for through-transmission laser welding of thermoplastics[J].Journal of Reinforced Plastics and Composites,2004,23(3):239-247.
[18]	KAGAN V A,PINHO G P.Laser transmission welding of semicrystalline thermoplastics--Part Ⅱ:Analysis of mechanical performance of welded nylon[J].Journal of Reinforced Plastics and Composites,2004,23(1):95-107.
[19]	HABERSTROH E,LUTZELER R.Influence of carbon black pigmentation on the laser beam welding of plastics micro parts[J].Journal of Polymer Engineering,2001,21(2/3):119-130.
[20]	ANON J.Additives aid laser welding[J].Plastics,Additives and Compounding,2005,7(1):34-35.
[21]	POTENTE H,FIEGLER G.Laser transmission welding of thermoplastics-Modelling of flows and temperature profiles[C]//Annual Technical Conference--ANTEC,Conference Proceedings.Brookfield,United States:Society of Plastics Engineers,2004:1193-1199.
[22]	CHO S K,YANG Y S,SON K J,et al.Fatigue strength in laser welding of the lap joint[J].Finite Elements in Analysis and Design,2004,40(9/10):1059-1070.
[23]	COELHO J M P,ABREU M A,RODRIGUES F C.Influence of thermal stresses in modelling the lap welding of thermoplastic films[C]//2005 Conference on Lasers and Electro-Optics Europe.Piscataway:IEEE,2005:658.
[24]	FARGAS M,von BUSSE A,BUNTE J.Flow field analysis duringquasi-simultaneous welding of thermoplastics[C]//Annual Technical Conference--ANTEC,Conference Proceedings.Brookfield,United States:Society of Plastics Engineers,2005:196-200.
[25]	DONGHUN N,AVRAHARN B.Analysis of heat transfer in combined socket and butt through transmission infrared welding of plastic pipes[C]//Annual Technical Conference--ANTEC,Conference Proceedings.Brookfield,United States:Society of Plastics Engineers,2005:186-190.
[26]	HOULT A P.Laser welding of polymer micro-fluidic devices using novel diode laser sources[C]//Proceedings of SPIE-The International Society for Optical Engineering.Bellingham,United States:The International Society for Optical Engineering,2003:308-313.
[27]	CHEN J W,ZYBKO J,CLEMENTS J.Diode laser bonding of planar MEMS,MOEMS,& microfluidic devices[C]//Micro-and Nanosystems-Materials and Devices Symposium.Warrendale:Materials Research Society,2005:309-314.
[28]	HABERSTROH E,LUETZELER R.3-D laser transmission welding[C]//Annual Technical Conference--ANTEC,Conference Proceedings.Brookfield,United States:Society of Plastics Engineers,2003:1099-1104.

[1]	杨昆 , 王霄 , 张惠中 , 邢安 , 刘会霞 . 吸收剂对热塑性塑料激光透射焊接质量的影响. 激光技术, 2009, 33(3): 246-248,272.
[2]	王霄 , 季进清 , 张惠中 , 刘会霞 . 基于全息技术的激光透射塑料焊接研究. 激光技术, 2008, 32(5): 510-512.
[3]	储晓猛 , 顾佩兰 , 杨建新 . 高密度聚乙烯塑料激光焊接工艺参量试验研究. 激光技术, 2010, 34(1): 116-119. doi: 10.3969/j.issn.1001-3806.2010.01.033
[4]	唐代明 , 苟淑云 , 王军 . 低合金相变诱发塑性(TRIP)钢激光焊接的研究进展. 激光技术, 2012, 36(2): 145-150,178. doi: 10.3969/j.issn.1001-3806.2012.02.001
[5]	黄开金 , 林鑫 , 胡木林 , 谢长生 , 陶曾毅 . 激光焊接金刚石锯片的研究现状. 激光技术, 2006, 30(5): 486-489,493.
[6]	高建昌 , 邵红红 , 许友谊 . 带防护螺母激光焊接的应用研究. 激光技术, 2006, 30(3): 271-273.
[7]	杨洪亮 , 金湘中 , 修腾飞 , 费鑫江 , 叶颖 . 钢/铝异种金属光纤激光焊接数值模拟. 激光技术, 2016, 40(4): 606-609. doi: 10.7510/jgjs.issn.1001-3806.2016.04.031
[8]	高明 , 曾晓雁 , 严军 , 胡乾午 , 王福德 , 邓业平 . 激光-电弧复合焊接的热源相互作用. 激光技术, 2007, 31(5): 465-468.
[9]	胡增荣 , 周建忠 , 郭华锋 , 杜建钧 . 应用ABAQUS模拟激光焊接温度场. 激光技术, 2007, 31(3): 326-329.
[10]	彭和思 , 陈兵华 , 唐景龙 , 邓时累 , 陈根余 , 陈焱 . 激光焊接工艺对K418与0Cr18Ni9焊接接头性能的影响. 激光技术, 2018, 42(2): 229-233. doi: 10.7510/jgjs.issn.1001-3806.2018.02.017
[11]	高明 , 曾晓雁 , 胡乾午 . 低碳钢CO2激光-脉冲MAG电弧复合焊接工艺研究. 激光技术, 2006, 30(5): 498-500,506.
[12]	陈俊科 , 石岩 , 倪聪 , 蒋士春 , 刘佳 . 线能量对奥氏体不锈钢激光焊接质量的影响. 激光技术, 2015, 39(6): 850-853. doi: 10.7510/jgjs.issn.1001-3806.2015.06.025
[13]	周聪 , 夏海龙 , 陈根余 , 李时春 , 黎长邹 . 光纤激光焊接工艺参量对底部驼峰的影响. 激光技术, 2015, 39(5): 625-630. doi: 10.7510/jgjs.issn.1001-3806.2015.05.009
[14]	王芸鹏 , 石岩 . 磁场对工业纯镍激光焊接组织与耐腐蚀性影响. 激光技术, 2019, 43(1): 19-24. doi: 10.7510/jgjs.issn.1001-3806.2019.01.005
[15]	钟欢欢 , SINGARE Sekou , 陈盛贵 . 基于有限元法的聚碳酸酯激光焊接性能研究. 激光技术, 2015, 39(2): 209-214. doi: 10.7510/jgjs.issn.1001-3806.2015.02.014
[16]	陈根余 , 黎长邹 , 周聪 , 张焱 , 夏海龙 . 高功率光纤激光非熔透焊接5A06铝合金. 激光技术, 2016, 40(1): 15-19. doi: 10.7510/jgjs.issn.1001-3806.2016.01.004
[17]	王强 , 焦俊科 , 王飞亚 , 张文武 , 盛立远 . CFRP与不锈钢激光焊接的有限元分析. 激光技术, 2016, 40(6): 853-859. doi: 10.7510/jgjs.issn.1001-3806.2016.06.017
[18]	王玉玲 , 张翔宇 , 胡小红 . 钛合金-不锈钢异种材料激光焊接工艺研究. 激光技术, 2017, 41(6): 816-820. doi: 10.7510/jgjs.issn.1001-3806.2017.06.010
[19]	柳娟 , 唐霞辉 , 彭浩 , 秦应雄 , 邓前松 . 高效率3工位激光焊接系统的控制优化. 激光技术, 2010, 34(1): 56-59. doi: 10.3969/j.issn.1001-3806.2010.01.016
[20]	陈永城 , 罗子艺 , 韩善果 , 蔡得涛 , 哈斯金·弗拉基斯拉夫 . 5mm厚紫铜激光焊接接头组织及性能研究. 激光技术, 2019, 43(2): 212-216. doi: 10.7510/jgjs.issn.1001-3806.2019.02.012

点击查看大图

计量

文章访问数: 4860
HTML全文浏览量: 830
PDF下载量: 503
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

激光焊接塑料的方法及发展现状

作者简介: 刘会霞(1964- ),女,教授,研究方向为激光加工、表面微细造型数值模拟和实验、逆向工程、数字化设计与制造技术.E-mail:lhx@ujs.edu.cn.

Methods and present status of laser welding of plastics

计量

激光焊接塑料的方法及发展现状

作者简介: 刘会霞(1964- ),女,教授,研究方向为激光加工、表面微细造型数值模拟和实验、逆向工程、数字化设计与制造技术.E-mail:lhx@ujs.edu.cn

English Abstract

Methods and present status of laser welding of plastics

全文HTML

目录

留言板

激光焊接塑料的方法及发展现状

作者简介: 刘会霞(1964- ),女,教授,研究方向为激光加工、表面微细造型数值模拟和实验、逆向工程、数字化设计与制造技术.E-mail:lhx@ujs.edu.cn.

Methods and present status of laser welding of plastics

计量

出版历程

激光焊接塑料的方法及发展现状

作者简介: 刘会霞(1964- ),女,教授,研究方向为激光加工、表面微细造型数值模拟和实验、逆向工程、数字化设计与制造技术.E-mail:lhx@ujs.edu.cn

English Abstract

Methods and present status of laser welding of plastics

全文HTML

目录