Citation: | LI Ying-hua, CHEN Qian-rong, ZHAO Hong-peng, LEI Hao, LIU Yan-fang. Modeling and simulation of the detecting energy distribution of laser guidance seekers[J]. LASER TECHNOLOGY, 2013, 37(4): 556-560. DOI: 10.7510/jgjs.issn.1001-3806.2013.04.031 |
[1] |
FAN J K,ZHANG G Y.Design and development of the parameters testing system for quadrantal detector[J].Journal of Harbin Universe Science and Technology,2005,10(4):4-7(in Chinese).
|
[2] |
GAO Z J,ZHANG A J,SHI G H.Simulation study on the seeker of aerodynamically stabilized laser-guided aerial bomb[J].Opto Electronic Engineering,2007,34(1):4-8(in Chinese).
|
[3] |
LIU Z G,ZHANG J S,WANG S C,et al.Research of digital simulation of laser-guided bomb[J].Journal of System Simulation,2005,17(7):1757-1759.
|
[4] |
YU F,HE Y,LI S,et al.Improvement of positioning algorithm for four-quadrant optoelectronic detection system[J].Journal of Applied Optics,2008,29(4):493-497(in Chinese).
|
[5] |
BAI L.Research and application of laser atmospheric transmission theory.Beijing: Beijing University of Posts and Telecommunications,2008:5-21(in Chinese).
|
[6] |
WU Q B.Research on parameters-automatic-measurement system of the quarter infrared optic-electronic detector.Wuhan:Huazhong University of Science Technology,2005:9-11(in Chinese).
|
[7] |
NIU Y X.Research on high-power laser-induced damage and protective technology of opoelectronics systems.Tianjin:Tianjin University,2005:83-88(in Chinese).
|
[8] |
XU L J,ZHANG X H,LU Y F,et al.Research on responsibility of PIN detector interaction with Laser[J].Laser Infrared,2009,39(7):717-720(in Chinese).
|
[9] |
NIU Y X,WANG Y F,ZHAO J G,et al.Research on laser damage of four-quadrant photodetector[J].Journal of OptoelectronicsLaser, 1996,10(3):215-217(in Chinese).
|
[10] |
SHU B H,LU Q S,ZHANG G Q,et al.Laser damage of quadrant detector and its influences on optical guidance[J].High Power Laser and Particle Beams,1997,9(3):463-465(in Chinese).
|
1. |
孔彦坤,邓伟,金国忠,雷基林,陈丽琼,贾德文. 36MnVS4和46MnVS5连杆裂解性能差异性研究及质量缺陷分析. 中国机械工程. 2024(06): 1103-1111+1119 .
![]() | |
2. |
刘友健,雷智洪,吴俊伟,陈燕,纪轩荣. 超快激光制备高频1-3型PIN-PMN-PT复合材料超声换能器. 压电与声光. 2023(02): 288-293 .
![]() | |
3. |
王冠,陈国华,诸杰煜,汪春辉. 激光加工工艺参数对36MnVS4连杆切槽质量影响研究. 激光杂志. 2023(08): 198-205 .
![]() | |
4. |
林晓平,王冠,张冲,汪春辉,刘赞丰,张雅文. 光纤激光垂直加工连杆裂解槽装备设计. 组合机床与自动化加工技术. 2022(03): 134-137 .
![]() | |
5. |
张冲,王冠,刘赞丰,张雅文. 激光微加工对Ti6Al4V表面形貌及润湿性影响的研究. 激光技术. 2021(01): 31-36 .
![]() | |
6. |
赵士伟,张海云,李志永,赵玉刚,张晋烨. 激光参量对血管支架切缝形貌及粗糙度的影响. 激光技术. 2020(03): 299-303 .
![]() | |
7. |
寇淑清,修亭亭,金文明,赵勇,姚娟. 后桥主减速器壳体轴承座材料裂解性能数值分析. 华南理工大学学报(自然科学版). 2019(07): 121-127+135 .
![]() | |
8. |
郭树霞. 改进蚁群算法下激光切割加工工艺优化研究. 机电信息. 2019(24): 94-95 .
![]() | |
9. |
赵三军,赵水,张志强,贾斌,陈绍磊,周玉梅,姜冰,吴军. 激光切割8 mm厚锰钢板的工艺试验研究. 制造技术与机床. 2019(09): 70-73 .
![]() |