Advanced Search
CHEN Man-long. Vertical projection measuring method for male thread and its application analysis[J]. LASER TECHNOLOGY, 2012, 36(6): 793-797. DOI: 10.3969/j.issn.1001-3806.2012.06.020
Citation: CHEN Man-long. Vertical projection measuring method for male thread and its application analysis[J]. LASER TECHNOLOGY, 2012, 36(6): 793-797. DOI: 10.3969/j.issn.1001-3806.2012.06.020

Vertical projection measuring method for male thread and its application analysis

More Information
  • Received Date: January 13, 2012
  • Revised Date: March 25, 2012
  • Published Date: November 24, 2012
  • In order to measure male thread efficiently,vertical projection measurement method was studied in theory and experiment.The reason and conditions for the distortion of thread profiles in process of measuring profile angles was explained taking tri-angular thread and acme thread as examples.It is proved in principle that thread profile distortion cannot occur in measuring tri-angular thread profiles with vertical projection measuring method,while it does for acme thread.After comparing the measurement data of tri-angular thread and acme thread that measured with tool microscope and image instrument respectively,it shows that tri-angular and pipe thread can be measured properly with vertical projection measurement,and it can bring about big error for acme thread measurement.The result is helpful to measure male thread efficiently with vertical projection measurement.
  • [1]
    XU X E.Screw thread test and measurement[M].Beijing:China Metrology Publishing House,1984:61,218-222,231-234(in Chinese).
    [2]
    HOPPE H,de ROSE T D,McDONALD J,et al.Surface reconstruction from unorganized points[J].computer Graphics,1999,26(2): 71-78.
    [3]
    LU D F.Research on laser screw thread parameter detection technology[D].Harbin:Harbin Institute of Technology,2007:10-11(in Chinese).
    [4]
    MIAO S D,QIAO P L,LIN K Z,et al.Research of method in the precise measurement based on line scan CCD[J].Journal of Harbin University of Science and Technology,2006,4(11):1-3(in Chinese).
    [5]
    HE F J,ZHANG R J,DU Z J,et al.Non-contact measurement of damaged external tapered thread based on linear array CCD[C]//International Symposium on Instrumentation Science and Technology. Washington,USA:Institute of Physics Publishing House,2006:676-680.
    [6]
    JIN H L,SASAKI O.Measurement of a cross-sectional profile of a thread gauge using a sinusoidally vibrating interference pattern[J]. Applied Optics,2011,50(7):3470-3474.
    [7]
    HUANG H,JYWE W,LIU C,et al.Development of a novel laserbased measuring system for the thread profile of ballscrew[J].Optical and Lasers in Engineering,2010,48(10):1012-1018.
    [8]
    ZHU G,ZHU X F.Reading system for thread features based on image recognition[J].computer&Digital Engineering,2010,38(11):156-159(in Chinese).
    [9]
    CHENG D X.Mechanic design manual 2[M].Beijing:Chemical Industry Press,2008:5.5-5.6(in Chinese).
    [10]
    JIN G L,JIN Z F.Thread machining and measuring manual[M]. Beijing:National Defense Industry Press,1982:461-463(in Chinese).
  • Related Articles

    [1]WEI Yan, KONG Qingqing, SHEN Hua. Safety control method for the failure of 10kW-level optic switch coupling[J]. LASER TECHNOLOGY, 2022, 46(5): 685-690. DOI: 10.7510/jgjs.issn.1001-3806.2022.05.018
    [2]JIANG Qiuyue, ZHONG Shunshun, ZHOU Xiongfeng, WU Guodong, MA Zhu, SUN Xiang. Research and optimization of coupling of small aspect ratio optoelectronic devices[J]. LASER TECHNOLOGY, 2020, 44(5): 546-552. DOI: 10.7510/jgjs.issn.1001-3806.2020.05.004
    [3]SONG Mangu, CAO Liqiang, LIU Fengman, XUE Haiyun, SUN Yu, LI Baoxia. Optimized design of grating coupling packaging structure on silicon substrate[J]. LASER TECHNOLOGY, 2017, 41(4): 479-483. DOI: 10.7510/jgjs.issn.1001-3806.2017.04.004
    [4]GUO Haiping, WAN Chenhao, XU Chengwen, YAN Tuo, WANG Dongsheng. Study on dynamic mode stability of external cavity diode lasers[J]. LASER TECHNOLOGY, 2016, 40(5): 706-710. DOI: 10.7510/jgjs.issn.1001-3806.2016.05.018
    [5]LEI Sichen, KE Xizheng, SHAO Junhu. Experimental study about fiber array coupling and auto-alignment[J]. LASER TECHNOLOGY, 2014, 38(2): 191-195. DOI: 10.7510/jgjs.issn.1001-3806.2014.02.010
    [6]PENG Bo, ZHANG Hai-tao, YAN Ping, GONG Ma-li. Fused taper technique for fiber coupling applications[J]. LASER TECHNOLOGY, 2009, 33(5): 470-472. DOI: 10.3969/j.issn.1001-3806.2009.05.007
    [7]WANG Chao, FENG Guo-ying, YANG Hao, ZHOU Qing, LI Wei, SU Juan. Calculating the coupling efficiency of the laser diode to the semi-tapered multimode fiber by ray-tracing method[J]. LASER TECHNOLOGY, 2008, 32(4): 434-436,440.
    [8]TAN Xu-dong, REN Gang, CAI Bang-wei, QIAO Yi-ming. Theoretical and experimental study on coupling efficiency of LD at different fiber inclined surface[J]. LASER TECHNOLOGY, 2005, 29(1): 59-61,89.
    [9]WEI Wen-lou, OU Pan, YAN Pin, GONG Ma-li, XIAO Li-min. Side-pumping coupler technology for double-clad fiber[J]. LASER TECHNOLOGY, 2004, 28(2): 116-120.
    [10]Li Jiawei, Wang Ying, Chen Yihong, Wu Chagjun. Portional coupling efficiencies in intersecting circular cavities[J]. LASER TECHNOLOGY, 1996, 20(3): 133-137.
  • Cited by

    Periodical cited type(2)

    1. 沈志飞,刘晓东,费锡磊,康恺. 基于点集贝塞尔曲线优化的激光振镜加工算法. 激光技术. 2021(05): 548-553 . 本站查看
    2. 李霄,刘明. 一种钢包内壁温度场激光定位测量系统及其实验分析. 电子测量技术. 2020(05): 39-42 .

    Other cited types(0)

Catalog

    Article views (7) PDF downloads (5) Cited by(2)

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return