[1]
|
AUCÉLIO R Q, SOUZA R M D, CAMPOS R C D, et al. The determination of trace metals in lubricating oils by atomic spectrometry[J]. Spectrochimica Acta, 2007, B62(9):952-961. |
[2]
|
MCELROY F, MENNITO A, DEBRAH E, et al. Uses and applications of inductively coupled plasma mass spectrometry in the petrochemical industry[J]. Spectroscopy, 1998, 13(2):42-53. |
[3]
|
VARNES A W. Analytical methods for the analysis of petroleum pro-ducts[J]. Spectroscopy, 1985, 1(1):28-33. |
[4]
|
SYCHRA V, LANG I, SEBOR G. Analysis of petroleum and petroleum products by atomic absorption spectroscopy and related techniques[J].Progress in Analytical Atomic Spectroscopy, 1981, 4(1):341-426. |
[5]
|
KING A D, HILLIGOSS D R, WALLACE G F. Comparison of results for determination of wear metals in used lubricating oils by flame atomic absorption spectrometry and inductively coupled plasma emission spectrometry[J]. Atomic Spectroscopy, 1984, 5(4):189-191. |
[6]
|
GUAN L, FENG X L, XIONG G, et al. Application of dielectric spectroscopy for engine lubricating oil degradation monitoring[J]. Sensors & Actuators, 2011, A168(1):22-29. |
[7]
|
EISENTRAUT K J, NEWMAN R W, SABA C S, et al. Spectrometric oil analysis, detecting engine failures before they occur[J]. Analytical Chemistry, 1984, 56(9):1086A-1091A. |
[8]
|
MUNOZ R A A, ANGNES L. Simultaneous determination of copper and lead in ethanol fuel by anodic stripping voltammetry[J]. Microchemical Journal, 2004, 77(2):157-162. doi: 10.1016/j.microc.2004.02.010 |
[9]
|
GARCÍA-ANTÍN J, GRIMA R. Determination of zinc in lubricating oil by polarography of emulsified samples[J]. Fresenius Journal of Analytical Chemistry, 1992, 343(12):905-906. doi: 10.1007/BF00321966 |
[10]
|
TAMRAKAR P K, PITRE K S. Electroanalysis of trace metals in lubricating oils[J]. Bulletin of Electrochemistry, 2002, 18(1):35-40. |
[11]
|
MUNOZ R A A, SILVA C S, CORREIA P R M, et al. Potentiometric stripping analysis for simultaneous determination of copper and lead in lubricating oils after total digestion in a focused microwave-assisted oven[J]. Microchimica Acta, 2005, 149(3/4):199-204. |
[12]
|
MUNOZ R A A, OLIVEIRA P V, ANGNES L. Combination of ultrasonic extraction and stripping analysis:An effective and reliable way for the determination of Cu and Pb in lubricating oils[J]. Talanta, 2006, 68(3):850-856. doi: 10.1016/j.talanta.2005.06.016 |
[13]
|
POUZAR M, CERNOHORSKY' T, KREJCOVÁ A. Determination of metals in lubricating oils by X-ray fluorescence spectrometry[J]. Talanta, 2001, 54(5):829-835. doi: 10.1016/S0039-9140(01)00338-1 |
[14]
|
FASSEL V A, PETERSON C A, ABERCROMBIE F N, et al. Si-multaneous determination of wear metals in lubricating oils by inductively-coupled plasma atomic emission spectrometry[J]. Analytical Chemistry, 1976, 48(3):516-519. |
[15]
|
BROWN R J. Determination of trace metals in petroleum and petroleum products using an inductively coupled plasma optical emission spectrometer[J]. Spectrochimica Acta, 1983, B38(1):283-289. |
[16]
|
MERRYFIELD R N, LOYD R C. Simultaneous determination of metals in oil by inductively coupled plasma emission spectrometry[J]. Analytical Chemistry, 1979, 51(12):1965-1968. doi: 10.1021/ac50048a017 |
[17]
|
KUOKKANEN T, PERÄMÄKI P, VÄLIMÄKI I, et al. Determination of heavy metals in waste lubricating oils by inductively coupled plasma-optical emission spectrometry[J]. International Journal of Environmental Analytical Chemistry, 2001, 81(2):89-100. |
[18]
|
SOUZA R M, DA S C, AUCéLIO R Q. Determination of refractory elements in used lubricating oil by ICPOES employing emulsified sample introduction and calibration with inorganic standards[J]. Analytical Sciences, 2004, 20(2):351-355. |
[19]
|
WYNN T F, CLARDY P, VAUGHN L, et al. Wavelength-modulated, continuum-source excited atomic fluorescence spectrometric system for wear metals in jet engine lubricating oils using electrothermal atomization[J]. Analytica Chimica Acta, 1981, 124(1):155-161. doi: 10.1016/S0003-2670(01)83908-8 |
[20]
|
JOHNSON D J, PLANKEY F W, WINEFORDNER J D. Analysis of wear metals injet-engine oils via atomic fluorescence flame spectrometry with acontinuum source[J].Canadian Journal of Spectroscopy, 1974, 5(1):151-152. |
[21]
|
WINEFORDNER J D, FRASER L M, MILLER R L. A combination flame atomic fluorescence-atomic emission dc spectrometer for analysis of trace wear metals in jet engine oils[J]. Applied Spectroscopy, 1971, 25(4):477-482. |
[22]
|
KNOCHEN M, SIXTO A, PIGNALOSA G, et al. Determination of insolubles in diesel lubricating oil by FIA-visible spectrometry[J]. Talanta, 2004, 64(5):1359-1363. doi: 10.1016/j.talanta.2004.02.045 |
[23]
|
PIGNALOSA G, KNOCHEN M. Determination of wear metals in lubricating oils using flow injection AAS[J]. Atomic Spectroscopy, 2001, 22(1):250-257. |
[24]
|
TUELLA T M, ULLMAN A H, POLLARD B D, et al. A comparative study of standards for determinations of trace wear metals in jet engine oils[J]. Analytica Chimica Acta, 1979, 108(1):351-356. |
[25]
|
BURGUERA J L, BURGUERA M, ANTÍN R E, et al. Determination of aluminum by electrothermal atomic absorption spectroscopy in lubricating oils emulsified in a sequential injection analysis system[J]. Talanta, 2005, 68(2):179-86. doi: 10.1016/j.talanta.2005.06.014 |
[26]
|
ESCOBAR M P, SMITH B W, WINEFORDNER J D. Determination of metallo-organic species in lubricating oil by electrothermal vaporization inductively coupled plasma mass spectrometry[J]. Analytica Chimica Acta, 1996, 320(1):11-17. doi: 10.1016/0003-2670(95)00556-0 |
[27]
|
DUYCK C, MIEKELEY N, SATMARI P. Trace element determination in crude oil and its fractions by inductively coupled plasma mass spectrometry using ultrasonic nebulization of toluene solutions[J]. Spectrochimica Acta, 2002, B57(12):1979-1990. |
[28]
|
BINGS N H. Direct determination of metals in lubricating oils by laser ablation coupled to inductively coupled plasma time-of-flight mass spectrometry[J]. Journal of Analytical Atomic Spectrometry, 2002, 17(8):759-767. doi: 10.1039/B202004A |
[29]
|
ANNA P M M. Review:Applications of single-shot laser-induced breakdown spectroscopy[J]. Spectrochimica Acta, 2010, B65(3):185-191. |
[30]
|
HAHN D W, OMENETTO N. Laser-induced breakdown spectroscopy (LIBS), part Ⅱ:review of instrumental and methodological approaches to material analysis and applications to different fields[J]. Applied Spectroscopy, 2012, 66(4):347-419. doi: 10.1366/11-06574 |
[31]
|
HARMON R S, DELUCIA F C, McMANUS C E, et al. Laser-induced breakdown spectroscopy-An emerging chemical sensor technology for real-time field-portable, geochemical, mineralogical, and environmental applications[J]. Applied Geochemistry, 2006, 21(5):730-747. |
[32]
|
WANG Z, YUAN T B, HOU Z Y, et al. Laser-induced breakdown spectroscopy in China[J]. Frontiers of Physics, 2014, 9(4):419-438. |
[33]
|
CÁCERES J O, TORNERO LÍPEZ J, TELLE H H, et al. Quantitative analysis of trace metal ions in ice using laser-induced breakdown spectroscopy[J]. Spectrochimica Acta, 2001, B56(6):831-838. |
[34]
|
CHEN Z, LI H, LIU M, et al. Fast and sensitive trace metal analysis in aqueous solutions by laser-induced breakdown spectroscopy using wood slice substrates[J]. Spectrochimica Acta, 2008, B63(1):64-68. |
[35]
|
ALAMELU D, SARKAR A, AGGARWAL S K. Laser-induced breakdown spectroscopy for simultaneous determination of Sm, Eu and Gd in aqueous solution[J]. Talanta, 2008, 77(1):256-261. doi: 10.1016/j.talanta.2008.06.021 |
[36]
|
SARKAR A, ALAMELU D, AGGARWAL S K. Determination of thorium and uranium in solution by laser-induced breakdown spectrometry[J]. Applied Optics, 2008, 47(31):G58-G64. doi: 10.1364/AO.47.000G58 |
[37]
|
XIU J Sh, ZHONG S L, HOU H M, et al. Quantitative determination of manganese in aqueous solutions and seawater by laser-induced breakdown spectroscopy (LIBS) using paper substrates.[J]. App-lied Spectroscopy, 2014, 68(9):1039-1045. doi: 10.1366/13-07448 |
[38]
|
AGUIRRE M A, LEGNAIOLI S, ALMODÍVAR F, et al. Elemental analysis by surface-enhanced laser-induced breakdown spectroscopy combined with liquid-liquid microextraction[J]. Spectrochimica Acta, 2013, B79/80(3):88-93. |
[39]
|
GONDAL M A, HUSSAIN T, YAMANI Z H, et al. Detection of heavy metals in Arabian crude oil residue using laser induced breakdown spectroscopy[J]. Talanta, 2006, 69(5):1072-1078. doi: 10.1016/j.talanta.2005.11.023 |
[40]
|
FORTES F J, CTVRTNÍCKOVÁ T, MATEO M P, et al. Spectrochemical study for the in situ, detection of oil spill residues using laser-induced breakdown spectroscopy[J]. Analytica Chimica Acta, 2010, 683(1):52-57. doi: 10.1016/j.aca.2010.09.053 |
[41]
|
HUSSAIN T, GONDAL M A. Monitoring and assessment of toxic metals in Gulf War oil spill contaminated soil using laser-induced breakdown spectroscopy.[J]. Environmental Monitoring & Assessment, 2008, 136(1/3):391-399. |
[42]
|
FICHET P, MAUCHIEN P, WAGNER J F, et al. Quantitative elemental determination in water and oil by laser induced breakdown spectroscopy[J]. Analytica Chimica Acta, 2001, 429(2):269-278. doi: 10.1016/S0003-2670(00)01277-0 |
[43]
|
YAROSHCHYK P, MORRISON R J S, BODY D, et al. Quantitative determination of wear metals in engine oils using laser-induced breakdown spectroscopy:a comparison between liquid jets and static liquids[J]. Spectrochimica Acta, 2005, B60(7/8):986-992. |
[44]
|
YAROSHCHYK P, MORRISON R J S, BODY D, et al. Quantitative determination of wear metals in engine oils using LIBS:the use of paper substrates and a comparison between single-and double-pulse LIBS[J]. Spectrochimica Acta, 2005, B60(11):1482-1485. |
[45]
|
ELNASHARTY I Y, KASSEM A K, SABSABI M, et al. Diagnosis of lubricating oil by evaluating cyanide and carbon molecular emi-ssion lines in laser induced breakdown spectra[J]. Spectrochimica Acta, 2011, B66(8):588-593. |
[46]
|
XIU J Sh, BAI X Sh, NEGRE E, et al. Indirect laser-induced breakdown of transparent thin gel layer for sensitive trace element detection[J]. Applied Physics Letters, 2013, 102(24):2441011-2441015. |
[47]
|
XIU J Sh, BAI X Sh, MOTTO-ROS V, et al. Characteristics of indirect laser-induced plasma from a thin film of oil on a metallic substrate[J]. Frontiers of Physics, 2015, 10(2):115-123. |
[48]
|
XIU J Sh, MOTTO-ROS V, PANCZER G, et al. Feasibility of wear metal analysis in oils with parts per million and sub-parts per million sensitivities using laser-induced breakdown spectroscopy of thin oil layer on metallic target[J]. Spectrochimica Acta, 2014, B91(1):24-30. |
[49]
|
XIU J Sh, DONG L L, QIN H, et al. Investigation of the matrix effect on the accuracy of quantitative analysis of trace metals in li-quids using laser-induced breakdown spectroscopy with solid substrates[J]. Applied Spectroscopy, 2016, 70(12):2016-2024. doi: 10.1177/0003702816651889 |
[50]
|
ZHENG L J, CAO F, XIU J Sh, et al. On the performance of laser-induced breakdown spectroscopy for direct determination of trace metals in lubricating oils[J]. Spectrochimica Acta, 2014, B99(9):1-8. |