高功率激光反射镜热畸变补偿结构设计与仿真

彭玉峰; 吴定允; 张毅; 程祖海

doi:10.3969/j.issn.1001-3806.2012.01.031

高功率激光反射镜热畸变补偿结构设计与仿真

1.
河南师范大学物理与信息工程学院, 新乡 453007;
2.
周口师范学院物理与电子工程系, 周口 466001;
3.
华中科技大学武汉光电国家实验室, 武汉 430074

作者简介: 彭玉峰(1963- ),男,教授,博士,主要从事高能激光器件、激光与物质相互作用的研究.E-mail:yufengp@sing.com.

基金项目:
国家自然科学基金资助项目(61077037);河南省基础与前沿技术计划资助项目(102300413214)
中图分类号: TN248

Simulation and structure design of a high power laser mirror with self-compensation of thermal distortion

1.
College of Physics and Information Engineering, Henan Normal University, Xinxiang 453007, China;
2.
Department of Physics &; Electronic Engineering, Zhoukou Normal University, Zhoukou 466001, China;
3.
Wuhan National Laboratory for Optoelectronics, Huazhong University Science and Technology, Wuhan 430074 China
CLC number: TN248

摘要: 为了研究激光反射镜热畸变补偿结构的设计,在分析激光腔镜热变形行为的基础上,采用优化镜体结构,提出了一种减少入射激光光斑区域镜面热畸变的途径——热畸变自补偿激光反射镜,并与普通硅镜的热变形情况进行了比较.结果表明,当反射镜反射率为98%、入射激光功率为7kW、激光照射时间分别为2s,4s和10s时,普通硅镜镜面中心与光斑边缘处的热变形之差分别为0.167μm,0.174μm和0.172μm;而热畸变自补偿激光反射镜镜面中心与光斑边缘处的热变形之差分别为0.092μm,0.052μm和0.027μm.该研究结果对提高高能激光腔镜热效应稳定性、改善高能激光光束质量具有一定参考价值.
- 光学器件 /
- 激光反射镜 /
- 热畸变 /
- 自补偿 /
- 高能激光
Abstract: A high-power laser mirror with self-compensation for thermal distortion was presented and numerically simulated on the basis of its thermal deformation behavior after optimizing its substrate structure.When 7kW laser was input in 17cm diameter,and the reflectivity of the mirror was 98%,the difference between central maximum thermal distortion and boundary thermal distortion within laser radiation region on the mirror surface for the general silicon substrate(peak valley values) was 0.167μm,0.174μm and 0.172μm respectively,under the radiation time of 2s,4s and 10s.However,the thermal distortion difference(peak valley values) of the laser mirror with self-compensation of thermal distortions was 0.092μm,0.052μm,0.027μm,respectively.The study results are useful for improving the heat-effective stability and beam quality.
- optical devices /
- laser mirrors /
- thermal distortion /
- self-compensation /
- high-power laser

[1]	PENG Y F,CHENG Z H,ZHANG Y N,et al.Temperature distributions and thermal deformations of mirror substrates in laser resonators[J].Applied Optics,2001,40(27):4824-4830.
[2]	PENG Y F,CUI J L,CHENG Z H,et al.Characteristics of thermul distortions of the laser mirror substrates filled with phase-change materials[J].Optics & Laser Technology,2006,38(8):594-598.
[3]	LI X F,ZHANG B L,LIN M,et al.Numerical analysis of thermal distortion of the mirror in space to ground laser communication links[J].Optoelectronics Letters,2005,1(3):0209-0212.
[4]	REVESZ P,KAZIMIROV A,BAZAROV I.Optical measurement of themal deformation of multilayer optics under synchrotron radiation[J].Nuclear Instruments and Methods in Physics Research,2007,A582(1):142-145.
[5]	APOLLONOV V V,BYSTROV P I,BROVAL' SKI(Î) Y A,et al.Feasibility of using liquid-metal heat carriers to cool power optics components made of porous structures[J].Soviet Journal of Quantum Electronics,1981,11(6):796-798.
[6]	YU D L,SANG F T,JIN Y Q,et al.Finite element analysis of the mirror in high-energy density laser resonator[J].High Power Laser and Particle Beams,2001,13(2):129-132 (in Chinese).
[7]	YUEN W W,FLEISHMAN R V.Parametric study of mesh enhance forced convection heat transfer for the cooling of high power density mirrors[J].Proceedings of SPIE,1989,1047:43-45.
[8]	ZHANGYN,PENGYF,CHENGZH,et al.Research of complex structure of mirror cooled by phase change[J].High Power Laser and Particle Beams,2000,12(s1):77-79 (in Chinese).
[9]	(O)ZISIK M N.Heat conduction[M].New York:Wiley,1980:1-21.
[10]	NOWINSIK J L.Theory of thermoelasticity with applications[M].Netherlands:Sijthoff & Noordhoff International Publishers,1978:261-270.
[11]	FENGZQ,BAIL,ZHANGZB,et al.Thermal deformation compensation of high-energy laser mirrors[J].Optics and Precision Engineering,2010,18(8):1781-1786 (in Chinese).
[12]	YANG Zh Q,CHEN H Q,WANG L,et al.Investigation of laser aberration compensation using an intracavity deformable mirror[J].Laser Technology,2007,31 (5):449-451 (in Chinese).

[1]	杨富 , 黄伟 , 张彬 , 楚晓亮 , 刘志国 , 蔡邦维 . CO2激光辐照下光学薄膜的温度场与热畸变. 激光技术, 2004, 28(3): 255-258.
[2]	张耀宁 , 库耕 , 张小莉 , 杜泽明 , 程祖海 . 高功率CO2激光作用下硅镜热畸变的动态过程研究. 激光技术, 1998, 22(2): 116-118.
[3]	葛成良 , 张飞舟 , 张凯 , 雒仲祥 , 童立新 . 近红外激光水面传输热晕效应缩比实验研究. 激光技术, 2022, 46(4): 516-518. doi: 10.7510/jgjs.issn.1001-3806.2022.04.012
[4]	易亨瑜 , 齐予 , 易欣仪 , 黄吉金 . 通用原子公司高能激光器研制进展. 激光技术, 2017, 41(2): 213-220. doi: 10.7510/jgjs.issn.1001-3806.2017.02.014
[5]	赵琦 , 孟庆安 , 蒋泽伟 , 胡绍云 , 耿旭 , 高明伟 . 大口径高能脉冲激光参量测量装置的精度研究. 激光技术, 2015, 39(1): 100-103. doi: 10.7510/jgjs.issn.1001-3806.2015.01.020
[6]	易亨瑜 , 齐予 , 黄吉金 . 舰载激光武器的研制进展. 激光技术, 2015, 39(6): 834-839. doi: 10.7510/jgjs.issn.1001-3806.2015.06.022
[7]	黄沛 , 曹国辉 , 张海晶 , 张钧杰 . 美国陆军车载战术激光武器发展分析. 激光技术, 2022, 46(6): 817-822. doi: 10.7510/jgjs.issn.1001-3806.2022.06.017
[8]	易亨瑜 , 锁兴文 , 易欣仪 , 齐予 , 张凯 . 美国运输机机载激光系统研制进展. 激光技术, 2021, 45(2): 174-181. doi: 10.7510/jgjs.issn.1001-3806.2021.02.008
[9]	余丽芳 , 叶玉堂 , 吴建平 . 大口径光学薄膜激光预处理系统缺陷检测控制. 激光技术, 2012, 36(2): 188-190. doi: 10.3969/j.issn.1001-3806.2012.02.010
[10]	周冰 , 贺宣 , 刘贺雄 , 李秉璇 , 张炎 . 激光辐照非制冷微测辐射热计的理论研究. 激光技术, 2020, 44(4): 411-417. doi: 10.7510/jgjs.issn.1001-3806.2020.04.003
[11]	刘倚红 , 余文峰 , 孙峰 , 程祖海 , 张耀宁 . 半导体致冷复合相变硅镜光照热有限元模拟. 激光技术, 2005, 29(1): 9-10,17.
[12]	袁纵横 , 卢向东 , 黄静 . 光子晶体制作反射型相位补偿器的理论研究. 激光技术, 2006, 30(5): 476-478.
[13]	文世峰 , 史玉升 , 谢军 , 蔡道生 . 3维激光振镜扫描系统的关键技术研究. 激光技术, 2009, 33(4): 377-380. doi: 10.3969/j.issn.1001-3806.2009.04.012
[14]	柏玲 , 赵秀丽 , 刘一 , 曲士良 , 李岩 . 飞秒激光制备光纤微孔传感器. 激光技术, 2013, 37(1): 101-104. doi: 10.7510/jgjs.issn.1001-3806.2013.01.025
[15]	刘粤慧 , 仲顺顺 , 曹小兵 , 段吉安 . 蝶形光通信激光器的耦合规律与封装工艺研究. 激光技术, 2021, 45(6): 715-721. doi: 10.7510/jgjs.issn.1001-3806.2021.06.007
[16]	朱能伟 , 方晓东 , 梁勖 , 赵读亮 . 准分子激光器中张氏面型电极的电场仿真研究. 激光技术, 2017, 41(5): 680-683. doi: 10.7510/jgjs.issn.1001-3806.2017.05.012
[17]	高胜英 , 高仁喜 , 侯圣文 , 李岩 , 刘一 , 曲士良 . 飞秒激光在SiC晶体中制备高温环境用光栅. 激光技术, 2012, 36(6): 745-748. doi: 10.3969/j.issn.1001-3806.2012.06.009
[18]	张治国 , 熊木地 , 张增宝 , 金玉奇 . 单驱动变曲率单晶硅反射镜的研究. 激光技术, 2012, 36(2): 275-279,284. doi: 10.3969/j.issn.1001-3806.2012.02.035
[19]	何晓红 , 阮于华 . 一种面向大规模光学器件生产的数据采集系统. 激光技术, 2015, 39(1): 57-60. doi: 10.7510/jgjs.issn.1001-3806.2015.01.011
[20]	任树锋 , 吴福全 . 冰洲石-玻璃组合双反射平行分束偏光镜设计. 激光技术, 2012, 36(5): 686-688. doi: 10.3969/j.issn.1001-3806.2012.05.028

点击查看大图

计量

文章访问数: 4543
HTML全文浏览量: 668
PDF下载量: 455
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

高功率激光反射镜热畸变补偿结构设计与仿真

作者简介: 彭玉峰(1963- ),男,教授,博士,主要从事高能激光器件、激光与物质相互作用的研究.E-mail:yufengp@sing.com.

Simulation and structure design of a high power laser mirror with self-compensation of thermal distortion

计量

高功率激光反射镜热畸变补偿结构设计与仿真

作者简介: 彭玉峰(1963- ),男,教授,博士,主要从事高能激光器件、激光与物质相互作用的研究.E-mail:yufengp@sing.com

English Abstract

Simulation and structure design of a high power laser mirror with self-compensation of thermal distortion

全文HTML

目录

留言板

高功率激光反射镜热畸变补偿结构设计与仿真

作者简介: 彭玉峰(1963- ),男,教授,博士,主要从事高能激光器件、激光与物质相互作用的研究.E-mail:yufengp@sing.com.

Simulation and structure design of a high power laser mirror with self-compensation of thermal distortion

计量

出版历程

高功率激光反射镜热畸变补偿结构设计与仿真

作者简介: 彭玉峰(1963- ),男,教授,博士,主要从事高能激光器件、激光与物质相互作用的研究.E-mail:yufengp@sing.com

English Abstract

Simulation and structure design of a high power laser mirror with self-compensation of thermal distortion

全文HTML

目录