选区激光熔化直接成型个性化牙冠牙桥研究

何兴容; 杨永强; 王迪; 孔卫东; 吴伟辉; 苏旭彬; 黄伟红

doi:10.3969/j.issn.1001-3806.2010.01.001

选区激光熔化直接成型个性化牙冠牙桥研究

1.
华南理工大学, 机械与汽车工程学院, 广州, 510640;
2.
暨南大学, 附属第一医院, 口腔科, 广州, 510010;
3.
广州瑞通激光科技有限公司, 广州, 510380

作者简介: 何兴容(1985- ),女,硕士研究生,研究方向为激光加工及先进材料成型技术..

通讯作者: 杨永强, meyqyang@hotmail.com ;

基金项目:
广州市粤港关键领域重点突破中标项目(2007Z1-D6091);广东省教育部产学研合作专项资金资助项目(2007A090302004);广东省自然科学基金资助项目(8151063201000071)
中图分类号: R783;TG665

Direct manufacturing of customized crowns and fixed bridge by selectivelaser melting

1.
School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 510640, China;
2.
Department of Stomatology, First Affiliated Hospital, Jinan University, Guangzhou 510630, China;
3.
Guangzhou Riton Laser Co.Ltd., Guangzhou 510380, China

Corresponding author: YANG Yong-qiang, meyqyang@hotmail.com ;

CLC number: R783;TG665

摘要: 为了探索应用数字化反求设计结合选区激光熔化快速成型技术制作个性化牙冠牙桥的可行性,通过Laser-denta扫描系统测量牙列模型并 3 维重建其数字化外形,采用计算机辅助设计了牙冠牙桥。利用自主研发的选区激光熔化快速成型设备Dimetal-280进行了316L不锈钢粉末的正交实验工艺研究,获得优化参量,并用该参量加工设计了牙冠牙桥。结果表明,该方法能快速而精确地制造出形状复杂的个性化牙冠牙桥,且成型速度快、尺寸精度高、表面质量好、误差在±0.15mm以内,未经打磨表面粗糙度达到20μm;与传统加工方式相比,反求工程结合选区激光熔化快速成型的方法能快速而精确地制造出形状复杂的个性化金属牙冠牙桥,为其应用于口腔修复体的计算机辅助设计与制造提供了科学依据。
- 激光技术 /
- 快速成型 /
- 牙冠牙桥 /
- 选区激光熔化 /
- 反求工程 /
- 个性化
Abstract: To evaluate the feasibility of designing and fabricating crowns and fixed bridge by means of the digital reverse engineering and selective laser melting rapid prototyping technology, an optical scanning system, Laserdenta was used to measure the dental cast and reconstruct its three-dimension digital profile. The shape of crowns and fixed bridge was designed by computer based on the digital dental cast. By using the Dimetal-280 selective laser melting rapid prototyping system, the crowns and fixed bridge of 316L stainless steel was made through orthogonal experiments for parameter optimization. The results show that the crowns and fixed bridge of 316L stainless steel have good surface quality, high accuracy of ±0.15mm in dimension, good roughness of about 20μm. The technology of reverse engineering and direct manufacturing of complex customized metallic crowns and fixed bridge by selective laser melting shows obvious superiority with high speed, precise profile and good accuracy in size comparing with the traditional one so as to offer some evidence for its application in CAD/CAM of oral prosthesis.]
- laser technique /
- rapid prototyping /
- crowns and fixed bridge /
- selective laser melting /
- reverse engineering /
- customized

[1]	LIU X F,ZHAO Y M,WU G F,et al.Reliability of 3 dimentional laser surface scanner for nasal anthropometry[J].Journal of Practical Stomatology,2004,20(2):211-213(in Chinese).
[2]	WANG X B,YAO Y L,GAO B,et al.Three-dimensional reconstruction of posterior teeth by cutting and scanning layer-by-layer with an im proved measurement system[J].Journal of Practical Stomatology,2004,20(1):5-7(in Chinese).
[3]	AUNG S C,NGIM R C,LEE S T.Evaluation of the laser scanner as a surface measuring tool and its accuracy compared with direct facial anthropometric measurements[J].British Journal of Plastic Surgery,1995,48(8):551-558.
[4]	BERRY E,BROWN J M,CONNELL M,et al.Preliminary experience with medical applications of rapid prototyping by selective laser sintering[J].Medical Engineering Physery,1997,19(1):90-96.
[5]	ZHONG M L,NING G Q,LIU W J,et al.Fundamental aspects oil laser rapid&flexible manufactu rjng of metallic components[J].Applied Laser,2001,21(3):76-78(in Chinese).
[6]	WU J,GAO B,TAN H,et al.Titanium base of complete denture fabricated with laser rapid forming[J].Chinese Journal of Lasers,2006,33(8):1139-142(in Chinese).
[7]	WU W H,YANG Y Q.Key techniques of selective laser melting rapid prototyping system[J].Chinese Journal of Mechanical Engineering,2007,43(8):175-180(in Chinese).
[8]	WANG C L,YANG Y Q,WU W H.Experimental study on rapid prototyping of Ti-Ni alloy by selcetive laser melting[J].Chinese Journal of Lasers,2007,34(s1):190-195(in Chinese).
[9]	WU W H,YANG Y Q,WEI G Q.Direct manufacturing of precision metal parts by selective laser melting[J].Chinese Journal of Lasers,2007,34(s1):175-179(in Chinese).
[10]	KRUTH J P,FROYEN L,VAERENBERGH J V,et al.Selective laser melting of iron-based powder[J].Journal of Materials Processing Technology,2004,149(1/3):616-622.
[11]	HU Q W,YANG T P,LI P,et al.Fabrication and affecting factors of metallic parts by means of laser freeforming[J].Laser Technology,2007,31(4):403-441(in Chinese).
[12]	ZHAO J F,WU X M,TANG Y X,et al.Synthesis error analysis of rapid prototyping technology by using laser sintering[J].Journal of Aeronautical Manufacturing Technology,1999(2):26-29(in Chinese).
[13]	YADROITSEV I,BERTRAND P,SMUROV I.Parametric analysis of the selective laser melting process[J].Applied Surface Science,2007,253(19):8064-8069.

[1]	孙婷婷 , 杨永强 , 苏旭彬 , 郭明华 . 316L不锈钢粉末选区激光熔化成型致密化研究. 激光技术, 2010, 34(4): 443-446. doi: 10.3969/j.issn.1001-3806.2010.04.004
[2]	程大伟 , 杨永强 , 王池林 , 吴伟辉 . 铜磷合金粉末选区激光熔化成型研究. 激光技术, 2009, 33(1): 63-66.
[3]	卢建斌 , 杨永强 , 王迪 , 罗子艺 , 苏旭彬 . 选区激光熔化成型悬垂面质量的影响因素分析. 激光技术, 2011, 35(2): 148-151. doi: 10.3969/j.issn.1001-3806.2011.02.002
[4]	孔卫东 , 王淑范 , 王迪 , 卢建斌 , 杨永强 . 选区激光熔化直接成型个性化舌侧托槽的研究. 激光技术, 2012, 36(3): 301-306,311.
[5]	师文庆 , 杨永强 , 黄延禄 , 程大伟 . 选区激光熔化快速成型过程温度场数值模拟. 激光技术, 2008, 32(4): 410-412.
[6]	张建华 , 赵剑峰 , 田宗军 , 花国然 , 王蕾 , 黄因慧 , 胡育文 , 张永康 . 纳米Al2O3激光烧结快速成型试验初探. 激光技术, 2004, 28(5): 455-458.
[7]	刘睿诚 , 杨永强 , 王迪 . 选区激光熔化成型金属零件上表面粗糙度的研究. 激光技术, 2013, 37(4): 425-430. doi: 10.7510/jgjs.issn.1001-3806.2013.04.003
[8]	杨永强 , 王迪 , 何兴容 . 基于CT数据反求快速制造牙颌技术研究. 激光技术, 2010, 34(3): 289-293. doi: 10.3969/j.issn.1001-3806.2010.03.001
[9]	吴伟辉 , 杨永强 , 王红卫 , 王迪 . 光纤激光直接快速成型3l6L不锈钢精密零件研究. 激光技术, 2009, 33(5): 486-489. doi: 10.3969/j.issn.1001-3806.2009.05.024
[10]	师文庆 , 杨永强 . 选区激光熔化中激光束的传输变换及聚焦特性. 激光技术, 2008, 32(3): 308-311.
[11]	王梦瑶 , 朱海红 , 祁婷 , 张虎 , 曾晓雁 . 选区激光熔化成形Al-Si合金及其裂纹形成机制研究. 激光技术, 2016, 40(2): 219-222. doi: 10.7510/jgjs.issn.1001-3806.2016.02.014
[12]	赵保军 , 施法中 , 冯涛 , 孙建民 , 徐海然 . 选区激光烧结成型中致密度的数值模拟与实验. 激光技术, 2003, 27(1): 40-43.
[13]	刘福兴 , 倪翠妍 , 廖运炫 . 利用激光固化技术制作硬骨骼支架模型. 激光技术, 2010, 34(6): 761-765. doi: 10.3969/j.issn.1001-3806.2010.06.012
[14]	杨来侠 , 刘旭 . 选区激光烧结聚苯乙烯粉的基础实验研究. 激光技术, 2016, 40(5): 767-771. doi: 10.7510/jgjs.issn.1001-3806.2016.05.031
[15]	杨来侠 , 刘旭 , 薛英保 . 糖基材料选择性激光烧结实验研究. 激光技术, 2016, 40(4): 526-530. doi: 10.7510/jgjs.issn.1001-3806.2016.04.015
[16]	王迪 , 杨永强 , 黄延录 , 吴伟辉 , 孙婷婷 , 何兴容 . 层间扫描策略对SLM直接成型金属零件质量的影响. 激光技术, 2010, 34(4): 447-451. doi: 10.3969/j.issn.1001-3806.2010.04.005
[17]	杨来侠 , 洪浩鑫 , 姚旭盛 , 薛英保 , 宗学文 , 王立军 . 选择性激光烧结蔗糖工艺实验研究. 激光技术, 2015, 39(1): 114-118. doi: 10.7510/jgjs.issn.1001-3806.2015.01.023
[18]	胡增荣 , 童国权 , 陈长军 , 郭华锋 , 周亮 , 徐家乐 . 激光纳米表面工程技术. 激光技术, 2014, 38(6): 764-770. doi: 10.7510/jgjs.issn.1001-3806.2014.06.009
[19]	段军 . 激光微加工磁盘——激光毛化技术现状与发展. 激光技术, 2006, 30(5): 490-493.
[20]	宋华峣 , 王辉林 , 曹泉泉 , 张守宇 , 秦正健 . 传递函数快速相关法的激光测速技术研究. 激光技术, 2020, 44(1): 61-65. doi: 10.7510/jgjs.issn.1001-3806.2020.01.011

点击查看大图

计量

文章访问数: 5619
HTML全文浏览量: 822
PDF下载量: 323
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

选区激光熔化直接成型个性化牙冠牙桥研究

作者简介: 何兴容(1985- ),女,硕士研究生,研究方向为激光加工及先进材料成型技术..

通讯作者: 杨永强, meyqyang@hotmail.com ;

Direct manufacturing of customized crowns and fixed bridge by selectivelaser melting

Corresponding author: YANG Yong-qiang, meyqyang@hotmail.com ;

计量

选区激光熔化直接成型个性化牙冠牙桥研究

通讯作者: 杨永强, meyqyang@hotmail.com;

作者简介: 何兴容(1985- ),女,硕士研究生,研究方向为激光加工及先进材料成型技术.

English Abstract

Direct manufacturing of customized crowns and fixed bridge by selectivelaser melting

Corresponding author: YANG Yong-qiang, meyqyang@hotmail.com

全文HTML

目录

留言板

选区激光熔化直接成型个性化牙冠牙桥研究

作者简介: 何兴容(1985- ),女,硕士研究生,研究方向为激光加工及先进材料成型技术..

通讯作者: 杨永强, meyqyang@hotmail.com ;

Direct manufacturing of customized crowns and fixed bridge by selectivelaser melting

Corresponding author: YANG Yong-qiang, meyqyang@hotmail.com ;

计量

出版历程

选区激光熔化直接成型个性化牙冠牙桥研究

通讯作者: 杨永强, meyqyang@hotmail.com;

作者简介: 何兴容(1985- ),女,硕士研究生,研究方向为激光加工及先进材料成型技术.

English Abstract

Direct manufacturing of customized crowns and fixed bridge by selectivelaser melting

Corresponding author: YANG Yong-qiang, meyqyang@hotmail.com

全文HTML

目录