Advanced Search

ISSN1001-3806 CN51-1125/TN Map

Volume 31 Issue 2
May  2010
Article Contents
Turn off MathJax

Citation:

Analysis of transient temperature and thermal stress distribution for heat capacity disk laser

  • Received Date: 2006-02-17
    Accepted Date: 2006-04-18
  • Based on a 3-D transient thermal model with inhomogeneous heat generation,the temperature and thermal stress distribution in the disk of heat capacity laser pumped by high power laser diode array(LDA) are simulated and analyzed by means of finite element methods.The results indicate that for the same pump intensity,the temperature and thermal stress distribution in the disk are not only related with the medium's geometry and the special distribution of pump intensity but also related with the fill factor of pump area.When the fill factor is less than 1,the concentrated tensile stress appeares near edge of disk surface,while the fill factor reaches up to 1,the surface exhibites compressive stress,and the center is less tensile stress.
  • 加载中
  • [1]

    ALBRECHT G F,SUTTON S B,GEORGE E V et al.Solid state heat capacity disk laser[J].Laser and Particle Beams,1998,16(4):605~625.
    [2]

    CAI Zh,HU H,JIANG J F et al.300W diode-pumped solid state heat capacity laser[J].High Power Laser and Particle Beams,1997,17(S1):49~52(in Chinese).
    [3]

    COMSDKEY B.Characterization of the heat loading of Nd-doped YAG,YOS,YLF,and GGG excited at diode pumping wavelengths[J].IEEE J Q E,1995,31(7):1261~1264.
    [4]

    KOECHNER W.Solid-state laser engineering[M].Beijing:Science Press,2002.82(in Chinese).
    [5]

    WANG J R,MIN J Ch,SONG Y Z.Analysis and optimization of thermal stress field in a high power laser slab[J].Laser Technology,2004,28(6):575~579(in Chinese).
    [6]

    CHEN Z L,MA L K,JIANG Z F et al.Finite element analysis of thermal effect of LD end-pumped laser medium[J].Laser Technology,2005,29(5):543~545(in Chinese).
    [7]

    ZHAI Q,LÜ B D.Two dimensional temperature and stress distributions in a diode-side-pumped slab laser medium[J].Laser Technology,1998,22(4):231~234(in Chinese).
    [8]

    LI M H,LIU A G,SONG Y Z.A numerical simulation for temperature and thermal stress distribution in Nd3+:YAG amplifiers[J].Laser Technology,2002,26(2):86~89(in Chinese).
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article views(16941) PDF downloads(422) Cited by()

Proportional views

Analysis of transient temperature and thermal stress distribution for heat capacity disk laser

  • 1. National University of Defence Technology, Changsha 410073, China;
  • 2. Laser Fusion Research Center, China Academy of Engineering Physics, Mianyang 621900, China

Abstract: Based on a 3-D transient thermal model with inhomogeneous heat generation,the temperature and thermal stress distribution in the disk of heat capacity laser pumped by high power laser diode array(LDA) are simulated and analyzed by means of finite element methods.The results indicate that for the same pump intensity,the temperature and thermal stress distribution in the disk are not only related with the medium's geometry and the special distribution of pump intensity but also related with the fill factor of pump area.When the fill factor is less than 1,the concentrated tensile stress appeares near edge of disk surface,while the fill factor reaches up to 1,the surface exhibites compressive stress,and the center is less tensile stress.

Reference (8)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return