Microstructure and properties of TiB2 reinforced Co-based alloy coating by laser cladding
-
1.
School of Material Science and Engineering, Anhui University of Technology, Maanshan 243002, China;
-
2.
College of Adult Education, Capital University of Medical, Beijing 100036, China
-
Corresponding author:
YUAN Xiao-min, yuan@ahut.edu.cn
-
Received Date:
2007-01-29
Accepted Date:
2007-03-28
-
Abstract
In order to study the effect of TiB2 on microstructure and sliding wear resistance of Co-based alloy coating,laser clad Co-base alloy and metal-ceramics layers of Co-based TiB2 was obtained on low carbon steel surface by means of 5kW continuous wave CO2 laser.The results showed that TiB2/Co metal-ceramics composite coating was mainly consisted of γ-Co,Cr23C6,TiB2,TiC and CO3Ti;the Co-based alloy coating was consisted of developed dendrite and hypoeutectic structure.Cinquefoil grain and fine eutectic structure were observed in the TiB2/Co metal-ceramics coating;the microhardness and sliding wear resistance of the TiB2/Co metal-ceramics coating were more excellent than that of Co-based alloy coating.These results are expected to provide available reference for further research of laser cladding metal-ceramics.
-
-
References
|
[1]
|
ZHAO Y F,CHEN Ch Zh.Mechanism of the deformation and preventive measures of the cracks in metal ceramics cladding layer[J].Laser Technology,2006,30(1):16-19(in Chinese). |
|
[2]
|
YAKOVLEV A,BERTRAND P,SMUROV I.Laser cladding of wear resistant metal matrix composite coatings[J].Thin Solid Films,2004,453-454:133-138. |
|
[3]
|
MAN H C,YANG Y Q,LEE W B.Laser induced reaction synthesis of TiC+WC reinforced metal matrix composites coatings on Al 6061[J].Surface and Coatings Technology,2004,185(1):74-80. |
|
[4]
|
CADENAS M,VIJANDE R,MONTES H J,et al.Wear behavior of laser ladded and plasma sprayed WC-Co coatings[J].Wear,1997,212(2):244-253. |
|
[5]
|
KOOI B J,PEI Y T,de HOSSON J TH M.The evolution of microstructure in a laser clad TiB-Ti composite coating[J].Acta Materialia,2003,51(3):831-845. |
|
[6]
|
WONG M S,LEE Y C.Deposition and characterization of Ti-B-Nmonolithic and multilayer coatings[J].Surface and Coatings Technology,1999,120-121:194-199. |
|
[7]
|
LIU Sh,ZHANG W P.Microstructure of particle reinforced Ni-based alloy composite coating by laser cladding[J].Transactions of the China Welding Institution,2005,26(2):13-16(in Chinese). |
|
[8]
|
SI S H,YUAN X M,HE Y Zh,et al.Microstructures and Properties of laser clad Ni-based metal-ceramics layers[J].Chinese Journal of Lasers,2002,29(8):759-762(in Chinese). |
|
[9]
|
KURZ W,FISHER J.Fundamentals of solidification[M].Aedermannsdors,Switzerland:Transations Techn-ical Publications,1989:20-21. |
|
[10]
|
GRANASY L,PUSZTAL T,WARRED J A,et al.A general mechanism of polycrystalline growth[J].Nature Materials,2004,3(9):645-650. |
-
-
Proportional views
-
Map
DownLoad: