Study on dynamic laser drilling for sticking plaster
-
1.
National Engineering Research Center for Laser Processing, HUST, Wuhan 430074, China;
-
2.
Henan Lingrui Pharmaceutical Co.Ltd, Xinxian 465550, China
-
Corresponding author:
ZHAO Xue-min, lwhzxmcn@126.com
;
-
Received Date:
2005-03-16
Accepted Date:
2005-04-05
-
Abstract
Dynamic laser drilling in the sticking plaster is being applied on the product line so that the traditional means is replaced.The method makes group-drilling into reality by means of gearing and dynamic emending.Dynamic emending includes speed emending and galvanometer scanning emending.The size and shape of the holes and distance between holes can be adjusted under 1m/min~8m/min by the control system.
-
-
References
|
[1]
|
LI J F,LI L,STOTT F H.Comparison of volumetric and surface heating sources in the modeling of laser melting of ceramic materials[J].International Journal of Heat and Mass Transfer,2004,47(6～7):1159～1174. |
|
[2]
|
NG G K L,LI L.The effect of laser peak power and pulse width on the hole geometry repeatability in laser percussion drilling[J].Opt & Laser Technol,2001,33(6):393～402. |
|
[3]
|
WAN Zh,DU W X.Calibration of graphic distortion and compensation of exposure for dual galvanometer scanning[J].Optics and Precision Engineering,2000,4(2):115～118 (in Chinese). |
|
[4]
|
GUAN Z Zh.Handbook of laser processing[M].Beijing:China Metrology Publishing House,1998.58～90 (in Chinese). |
|
[5]
|
WANG X D,ZHAO X M.The study on dynamic and high speed laser drilling system[J].Laser Technology,2003,27(6):563～566 (in Chinese). |
-
-
Proportional views
-
Map
DownLoad: