The experimental study on CO2 laser sintering of diamond fine powder compact

LIU Tian-ming; TANG Xia-hui; LI Li-bo; CAI Fang-han; QIN Ying-xiong

In order to improve diamond fine powder sinter's mechanical property,using the present laser technique,high power transverse CO2 laser is used to sinter diamond fine powder compact to study the integrating capability in the sinter between diamond fine powder and metallic powder,microstructure and the forming mechanism of microstructure in the different laser technical parameters.The results show that the fine sintering will be gained in the reasonable laser technical parameter,which can improve densenses and wear resistance,inaugurate a new technique of manufacture diamond tools.

Corresponding author: TANG Xia-hui, txh1116@mail.hus.tedu.cn;

1. National Laboratory of Laser Technology, HUST, Wuhan 430074, China

Received Date: 2005-04-13

Accepted Date: 2005-05-18

Available Online: 2006-05-25

Abstract: In order to improve diamond fine powder sinter's mechanical property,using the present laser technique,high power transverse CO2 laser is used to sinter diamond fine powder compact to study the integrating capability in the sinter between diamond fine powder and metallic powder,microstructure and the forming mechanism of microstructure in the different laser technical parameters.The results show that the fine sintering will be gained in the reasonable laser technical parameter,which can improve densenses and wear resistance,inaugurate a new technique of manufacture diamond tools.

HTML

Reference (11)

[1]	WANG Q Sh.Diamond sinter produce[M].Beijing:Standards Press of China,2000.136～146(in Chinese).
[2]	GUO Z X,HU J D,GUAN Q F et al.Laser sintering of copper matrix powder materils[J].Applied Laser,1997,17(3):119～121(in Chinese).
[3]	TAN Y L.Technical standards of diamond powder[J].Geology and Prospecting,1996,32(1):57～62(in Chinese).
[4]	TANG X H.Laser welding of diamond tools[M].Wuhan:HUST Press,2004.110～115(in Chinese).
[5]	ZHAO Y Zh,LIU J P,SHI Y W.Study on the property of laser remelting high-carbon-high-alloy steel[J].Laser Technology,2003,27(3):205～207(in Chinese).
[6]	LI J Ch.Calculate of laser diffraction and heat effect[M].Beijing:Beijing Science & Technology Press,2002.455～466(in Chinese).
[7]	WANG J J.Laser machining technology[M].Beijing:China Metrology Publishing House,1992.99～121(in Chinese).
[8]	WU Zh B,XIAO B,XU H J.A study on the mechanism of brazing between diamond and metal matrix[J].Tools Technology,2000,34(11):6～8(in Chinese).
[9]	ZHANG G Q,DAI Q L,HUANG H et al.Discussion of the present research on brazed monolayer diamond tools[J].Jewelry Science and Technology,2004,16(3):41～43(in Chinese).
[10]	ZHANG W P,MA Y T,LIU Sh.Microstructural characterization of in situ formed composite coating produced by laser cladding[J].Laser Technology,2005,29(1):38～39(in Chinese).
[11]	ZHOU J X,TANG X H,ZHOU Y et al.Investigation of the porosity defect phenomenon during laser welding of powder metal material[J].Laser Technology,2003,27(6):503～505(in Chinese).

The experimental study on CO2 laser sintering of diamond fine powder compact

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Proportional views