Status and development of cladding with high power density beam

Zhang Di; Shan Jiguo; Ren Jialie

This paper describes the status of cladding with high power density beam. The main problems and the solutions of them in this field are presented. The development tendency of cladding with high power density beam is pointed out.

1. Department of Applied Physics, National University of Defense Technology, Changsha, 410073

2. Department of Mechanical Engineering, Tsinghua University, Beijing, 100084

Received Date: 2000-01-24

Accepted Date: 2000-07-19

Available Online: 2001-01-25

Abstract: This paper describes the status of cladding with high power density beam. The main problems and the solutions of them in this field are presented. The development tendency of cladding with high power density beam is pointed out.

HTML

Reference (27)

[1]	武晓雷,陈光南. 金属学报,1998;34(12):1284～1288
[2]	王毛球,曾大文,宋武林 et al. 激光技术,1999;23(3):149～153
[3]	Abbovd J,West D,Rawlings R.J Mater Sci,1994;29(13):3393～3398
[4]	Barbera A,Mignone A,Tosto S et al. Surface Coatings Technol,1991; 46(3):317～329
[5]	栾景飞,郭作兴,胡建东et al.应用激光,1999;19(1):29～31
[6]	Weerasinghe V M,Steen W M. Lasers in Materials Processing.London: American Society for Metals,1983:166～173
[7]	Mclean M A,Shannon G J,Steen W M. Advances in Powder Metallurgy and Particu late Materials proceeding of the 1997 International Conference on Powder Metallu rgy and Particulate Materials,1997;21:3～6
[8]	Cadenas M,Cuetos J M,Ferhandez-Rico E et al. Revista de Metalurgia,19 98;34(2):120
[9]	Qian M,Lim L C,Chen Z D. Surface Coatings Technol,1998;106:174～182
[10]	Pan Q Y,Huang W D,Li Y M et al. Acta Metallurgica Sinica, 1997;10(5):445～452
[11]	周二华,曾晓雁,吴新伟 et al.激光技术,1997;21(1):34～37
[12]	裴宇韬,孟庆昌,欧阳家虎 et al.中国激光,1995;A22(12):935～938
[13]	Nagakura H,Nakata K,Honda Y et al. Journal of the Japan Society for Precision Engineering,1998;64(5):763～767
[14]	黄国栋,张悦仁.中国机械工程,1993;10(2):22～25
[15]	王顺兴,张一民,郑世安.金属热处理,1995;(10):10～13
[16]	吴新伟,曾晓雁,朱蓓蒂 et al.中国激光,1997;A24(6):570～576
[17]	Brandt M,Emms S B,Scoot D A et al. Proceedings of the 1997 L aser Materials Processing Conference,1997;83(2):11～20
[18]	Kovalenko V S,Lutay A M,Anyakin M S et al. Proceedings of the 1997 Las er Materials Processing Conference,1997;83(2):21～26
[19]	Choi J,Mazumder J. J Mater Sci,1994;29(17):4460～4476
[20]	许伯藩,史华忠,张细菊.中国激光,1998;A25(8):763～767
[21]	Liu Y,Koch J,Mazumder J et al. Metallurgical and Materials T ransactions B: Process Metallurgy and Materials Proce-ssing Science,1994;25(3):425～434
[22]	Hirose A,Kobayshi K F. Iron Steel Inst of Japan,1995;35(6):757～763
[23]	Miyamoto I,Fujimori S,Itakura K et al. Proceedings of the 1997 Laser Materials Processing Conference,1997;83(2):1～10
[24]	朱蓓蒂,曾晓雁.材料研究学报,1994;8(4):315～317
[25]	Suleimanov S Kh,Baizakov B B,Bugakov A G et al. J Physique IV,1999;9 (3):447～452
[26]	单际国,任家烈.中国表面工程,1999;12(1):22～24
[27]	Shan J G,Ren J L. Avtoma Svarka,1999;(4):56～58

Status and development of cladding with high power density beam

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Proportional views