Influence of mechanical stress on quartz filter output

GAO Ao; XIA Gang; KONG Yong; DIAO Li; WANG Wenlong; HAN Hua

doi:10.7510/jgjs.issn.1001-3806.2015.05.015

LASER TECHNOLOGY > 2015 > 39(5): 658-661. > DOI: 10.7510/jgjs.issn.1001-3806.2015.05.015

GAO Ao, XIA Gang, KONG Yong, DIAO Li, WANG Wenlong, HAN Hua. Influence of mechanical stress on quartz filter output[J]. LASER TECHNOLOGY, 2015, 39(5): 658-661. DOI: 10.7510/jgjs.issn.1001-3806.2015.05.015

Citation:

PDF (1334 KB)

Influence of mechanical stress on quartz filter output

College of Electrical and Electronic Engineering, Shanghai University of Engineering Science, Shanghai 201620, China

More Information

Received Date: August 25, 2014
Revised Date: January 10, 2015
Published Date: September 24, 2015

Graphical Abstract

Abstract

Abstract

In order to study influence of mechanical-stress on quartz filter output, based on the elasto-optical effect of quartz crystal, the relationship between birefringence of quartz crystal and mechanical stress in different directions was analyzed. After numerical simulation, the experimental system was set up by using UV-visible spectrophotometer of Ultra-6600 series and the transmission spectrum of a Lyot quartz birefringence filter was studied and investigated. Theoretical simulation and experimental results show that central wavelength of the Lyot quartz crystal birefringence filter will drift under mechanical stress at different directions. The drifts of central wavelength of a Lyot quartz crystal birefringence filter are 0.4nm, 0.6nm and 1nm respectively when mechanical stress is 0.0025N/m2 along the direction of Ox1 axis, Ox2 axis, Ox3 axis. The research is helpful for manufacture, design and application of quartz birefringence filters.
- optical devices,
- crystal optics,
- mechanical stress,
- elasto-optical effect,
- quratz crystal birefringent filter

FullText(HTML)

References (13)

References

[1]	FRANCON M. Optical filter for radiations separation[M]. Beijing: Science Press, 1984: 37-42(in Chinese).
[2]	WANG X, YAO J. Transmitted and tuning characteristics of birefringent filters[J]. Applied Optics, 1992, 31(22): 4505-4508.
[3]	HARRIS S E, AMMANN E O, CHANY I C. Optical network synthesis using birefringent crystals[J]. Journal of the Optical Society of America, 1964, 54(10): 1267- 1279.
[4]	KONG Y, WANG Y M, ZHANG L P, et al. A quartz birefringent fiter insensitive to incident angle[J]. Opics and Laser Technology, 2012, 44(5): 1497-1500.
[5]	KONG Y, YANG G W, HUANG X J. Multiple-stage liquid crystal tunedfilter[J]. Optik, 2011, 122(19): 1723-1729.
[6]	OWENSJ C. Optical refractive index of air dependence on pressure[J]. Temperature and Composition, 1967, 6(1): 51-58.
[7]	ZHANG J, LI G H. The theory of correcting the devation of retardation wave-plate[J]. Laser Technology, 2005, 29(6): 639-640(in Chinese).
[8]	ZHANG Sh, WU F Q, WU W D. Characteristics of multistage quartz optical filter based on the optical rotatory dispersion effect[J]. Acta Physica Sinica, 2008, 57(8):5020-5026.
[9]	PENG D Y, SONG L K, LI K T, et al. Measurement of birefringence of liquid crystal with polarized light interference method[J]. Laser Technology, 2014, 38(3): 422-424 (in Chinese).
[10]	CHEN G, LIAO L J, HAO W. Crystal physics basis[M]. Beijing: Science Press, 2007: 332-337(in Chinese).
[11]	LIAO Y B. Polarized opticas[M]. Beijing: Science Press, 2003: 133-135(in Chinese).
[12]	LI J Zh. Handbook of optics [M]. Xi'an: Shanxi Science and Technology Press, 1986: 6-70(in Chinese).
[13]	ZHANG W Q. Optimized parameters of birefringent filter[J]. Acta Optica Sinica, 2005, 25(10): 1420-1424(in Chinese).

Cited By

Cited by

Periodical cited type(13)

1.	李婕，李青清，李礼，刘钊，沈阳，涂静敏. 基于深度学习的机载点云屋顶平面提取算法. 激光技术. 2024(05): 628-636 . 本站查看
2.	宋伯宇，彭玲，池天河，吴同. 一种改进的全卷积网络激光点云分类方法. 测绘科学. 2021(05): 77-83 .
3.	周勇，李世云，赵品品. 基于机载激光扫描数据重建城市建筑三维模型. 测绘标准化. 2021(04): 42-45 .
4.	钟镇洪，李霆，姜幸俭，赵肇信，向珍琳. 基于图像的飞机导管三维重构技术. 现代计算机(专业版). 2019(07): 10-15 .
5.	李峰，米晓楠，孙广通，钱安. 地面激光扫描联合无人机影像的三维模型重建. 测绘与空间地理信息. 2019(09): 9-12 .
6.	张秋城，张纯. 文物建筑的激光信息采集方法. 自动化与仪器仪表. 2019(11): 12-15+20 .
7.	谢日华，何建军，胡娟，王莉，周鼎富，陈涌，周杰，陈春利. 基于修正灰色残差算法的风廓线质量控制. 激光技术. 2017(04): 573-577 . 本站查看
8.	曹志民，谷延锋，吴云. 机载LiDAR点云定量化局部结构信息分析. 地理空间信息. 2016(02): 10-12+7 .
9.	曹志民，吴云，谷延锋. 基于局部结构模型库的建筑物LiDAR点云去噪. 光学技术. 2016(04): 294-298 .
10.	赵宗泽，张永军. 基于植被指数限制分水岭算法的机载激光点云建筑物提取. 光学学报. 2016(10): 503-511 .
11.	吴燕雄，李峰，刘芳，程丽娜，郭丽丽. 平滑度欧式聚类算法分割点云数据. 测控技术. 2016(03): 36-38 .
12.	曲美亭，于静潇，卜巍. 基于语义引导贝叶斯算法的交互建筑设计模型. 科技通报. 2016(05): 133-136 .
13.	张飙，周国清，周祥，程小辉. 激光雷达多路距离测量系统设计. 激光技术. 2016(04): 576-581 . 本站查看

Other cited types(8)

Get Citation

PDF

XML

Article views (3) PDF downloads (12) Cited by(21)

Turn off MathJax

Article Contents

Abstract

References

Influence of mechanical stress on quartz filter output

Abstract

References

Cited by

Periodical cited type(13)

Other cited types(8)

Catalog

Links：

Influence of mechanical stress on quartz filter output

Abstract

References

Cited by

Periodical cited type(13)

Other cited types(8)

Catalog

Links：

Export File

Citation

Format

Content