Advanced Search

ISSN1001-3806 CN51-1125/TN Map

Volume 39 Issue 2
Dec.  2014
Article Contents
Turn off MathJax

Citation:

Design of driving system of quasi continuous wave laser diode based on differential amplifier circuit

  • Corresponding author: HUANG Zhanhua, zhanhua@tju.edu.cn
  • Received Date: 2014-04-16
    Accepted Date: 2014-04-24
  • In order to improve the stability and adjustability of the output of the driving system of high power laser diodes, improve the beam quality and increase the service life, based on the principle of differential amplifier circuit and open-circuit time constant, the static working point and the frequency response characteristics of the driving circuit were analyzed in theory and verified in experiments. The results show that the drive circuit can guarantee the output current to achieve the peak current of 0A~60A under the premise of no overshoot, the pulse width adjustable range from 20μs to continuous, the repetition frequency from 500Hz to 10kHz, the maximum power of 130W. This method improves the output stability, widens the adjustability of pulse width and repetition frequency and has more outstanding performance than the traditional methods.
  • 加载中
  • [1]

    XIN G F, QU R H, FANG Z J, et al. New development of high power semiconductor laser[J]. Laser & Optoelectronics Progress,2006(2):3-8 (in Chinese) .
    [2]

    MA X Y, WANG J, LIU S P. Present situation of investigations and applications in high power semiconductor lasers[J]. Infrared and Laser Engineering,2008,37(2):189-194 (in Chinese) .
    [3]

    YANG Y, YU D H, WU Y F, et al. Design of a novel power for narrow pulse laser diode[J]. Chinese Journal of Lasers,2011, 38(2):30-35 (in Chinese) .
    [4]

    TOGATOV V V, GNATYUK P A, REZINKIN D G. A high-frequency discharge unit for pumping systems of semiconductor lasers[J]. Instruments and Experimental Techniques, 2003, 46(5):667-671.
    [5]

    YANKOV P,TODOROV D.A high power high frequency laser diodes driver[J].IEEE Xplore,2004,3(5):451-452.
    [6]

    THOMPSON M. Intuitive analog circuit design[M]. Waltham, Massachusetts,USA: Butterworth-Heinemann, 2006:331-334.
    [7]

    LU K, LIU B Y, BAI Y L, et al. High power laser diode drive power supply[J]. Infrared and Laser Engineering,2012,41(10):2680-2684 (in Chinese) .
    [8]

    ZHAO H Y, SUN L, SU B H. Design and realization of laser semiconductor driver[J]. Electronic Design Engineering,2010,18(4):149-151 (in Chinese) .
    [9]

    WANG H, XU J L, LI X H. The development of a high-efficiency semiconductor laser diode driver[J]. Electronic Design Engineering, 2013,21(14):111-113 (in Chinese) .
    [10]

    NIU B, CHEN S J, SUN J H, et al.The research of common-mode rejection capability of the differential amplifier [J]. Journal of Harbin University of Science and Technology, 2009,14(1):92-95 (in Chinese) .
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article views(3560) PDF downloads(663) Cited by()

Proportional views

Design of driving system of quasi continuous wave laser diode based on differential amplifier circuit

    Corresponding author: HUANG Zhanhua, zhanhua@tju.edu.cn
  • 1. Key Laboratory of Opto-electronics Information Technology, Ministry of Education, College of Precision Instrument and Optoelectronics Engineering, Tianjin University, Tianjin 300072, China

Abstract: In order to improve the stability and adjustability of the output of the driving system of high power laser diodes, improve the beam quality and increase the service life, based on the principle of differential amplifier circuit and open-circuit time constant, the static working point and the frequency response characteristics of the driving circuit were analyzed in theory and verified in experiments. The results show that the drive circuit can guarantee the output current to achieve the peak current of 0A~60A under the premise of no overshoot, the pulse width adjustable range from 20μs to continuous, the repetition frequency from 500Hz to 10kHz, the maximum power of 130W. This method improves the output stability, widens the adjustability of pulse width and repetition frequency and has more outstanding performance than the traditional methods.

Reference (10)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return