Theoretical analysis of error induced by laser scanning spherical eccentricity

LIN Jinghuan; DAI Yong; LIN Xuhuan; XU Minjie

doi:10.7510/jgjs.issn.1001-3806.2014.06.019

In order to study the effect on the laser scanning accuracy because of a certain eccentricity between the laser scanning center and the spherical test center during the measurement, after setting up a mathematical mode and deducing a calculation formula, the laser scanning deviation caused by eccentricity e was analyzed theoretically. The relationship of the several effect factors of laser scanning contour deviation was analyzed. The conclusion was reached that that eccentricity error does not exceed 2e with the increase of radius R. The results show that the impact of eccentricity e on the laser scanning contour deviation can be reduced after both the axes of the scan center and the measured spherical center are transformed to the same coordinate system equivalently.

Theoretical analysis of error induced by laser scanning spherical eccentricity

Corresponding author: DAI Yong, b4891392@163.com;

1. Institute of Electrical and Mechanical, Zhejiang University of Technology, Hangzhou 310014, China

Received Date: 2013-10-14

Accepted Date: 2013-11-20

Available Online: 2014-11-25

Abstract: In order to study the effect on the laser scanning accuracy because of a certain eccentricity between the laser scanning center and the spherical test center during the measurement, after setting up a mathematical mode and deducing a calculation formula, the laser scanning deviation caused by eccentricity e was analyzed theoretically. The relationship of the several effect factors of laser scanning contour deviation was analyzed. The conclusion was reached that that eccentricity error does not exceed 2e with the increase of radius R. The results show that the impact of eccentricity e on the laser scanning contour deviation can be reduced after both the axes of the scan center and the measured spherical center are transformed to the same coordinate system equivalently.

HTML

Reference (10)

[1]	DAI J F.Study on 2-D large-scale measurement based on laser range. Tianjin: Tianjin University, 2008:28-41(in Chinese).
[2]	CHEN H,TAN J B. Effect of beam incident angles on trihedral corner reflector laser ranging[J].Journal of OptoelectronicsLaser, 2006,17(8):986-988(in Chinese).
[3]	ZHONG Sh Y, LI S Sh. Study of multi-pulsed laser ranging technology[J].Laser Infrared, 2006,36(6):797-799(in Chinese).
[4]	WU H Y. Study on large-scale scanning measurement system based on laser range finder. Tianjin: Tianjin University, 2009:29-45(in Chinese).
[5]	DAI B M,ZHANG Ch,LI D Sh.Analysis of ranging error of pulse laser ranger[J]. Laser Technology, 1999,23(1):50-52(in Chinese).
[6]	ZHANG G Y, AN Zh Y, ZHANG C Zh, et al. The laser-scaning proflle auto-measuring instrument and error analysis[J]. Laser Infrared, 1997,27(2):88-91(in Chinese).
[7]	ZHENG D H, SHEN Y Zh, LIU Ch. 3-D laser scanner and its effect factor analysis of surveying error[J]. Engineering of Surveying and Mapping, 2005,14(2):32-34(in Chinese).
[8]	LIU Zh, KRYS D. The use of laser range finder on a robotic platform for pipe inspection[J]. Mechanical Systems and Signal Processing, 2012,31(3):58-63.
[9]	LI J G, LIN Ch J. Based on semiconductor laser technology used in railway detection research[J]. Applied Technology, 2010,2(1): 107-108(in Chinese).
[10]	LI J, WAN Y Ch, JIANG M H. Ground-based laser technology tunnel deformation monitoring technology[J]. Geospatial Information, 2012,10(1):14-17(in Chinese).

Theoretical analysis of error induced by laser scanning spherical eccentricity

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Proportional views