Effect of high repetition frequency on laser decoding recognition process

ZHAO Qian; LIU Zhiguo; WANG Shicheng; ZHANG Shuai

doi:10.7510/jgjs.issn.1001-3806.2014.04.026

To estimate the impact of high repetition frequency jamming on laser decoding,the normalized cross-correlation function method was adopted. The effect of high repetition frequency jamming on precise frequency code during the distinguishing process of decoding was quantified under two circumstances. One was that only the jammed signal entered into the time-gate, the other was that the jammed signal entered into the time-gate at a certain time before the guiding signal. Experimental results show that the jamming effects are different for different jamming ferquency and the jamming effect is the best when the high frequency comes to 100kHz. The simulation of the effect of different factors provides the basis to analyze the jamming effect of high frequency signal.

Effect of high repetition frequency on laser decoding recognition process

Corresponding author: WANG Shicheng, wshcheng@vip.163.com;

1. Department of Control Engineering, The Second Artillery Engineering University, Xi'an 710025, China

Received Date: 2013-08-12

Accepted Date: 2013-09-24

Available Online: 2014-07-25

Abstract: To estimate the impact of high repetition frequency jamming on laser decoding,the normalized cross-correlation function method was adopted. The effect of high repetition frequency jamming on precise frequency code during the distinguishing process of decoding was quantified under two circumstances. One was that only the jammed signal entered into the time-gate, the other was that the jammed signal entered into the time-gate at a certain time before the guiding signal. Experimental results show that the jamming effects are different for different jamming ferquency and the jamming effect is the best when the high frequency comes to 100kHz. The simulation of the effect of different factors provides the basis to analyze the jamming effect of high frequency signal.

HTML

Reference (11)

[1]	WANG W F, LIU Zh G, WANG Sh Ch, et al. Design of energy simulation system for laser guided weapons[J]. Laser Technology,2012,36(6): 844- 848(in Chinese).
[2]	XING H, DING Zh D, LEI P, et al. Influence of electro-optical jamming on attack effect of laser-guided bombs[J]. Electronics Optics ＆ Control, 2007,14(3):51-54(in Chinese).
[3]	ZHU Ch Ch, NIE J S, TONG Zh Ch. Analysis on the mode of high repetition laser jamming[J]. Infrared and Laser Engineering, 2009,38(6):1060-1063(in Chinese).
[4]	XIE X Ch. Performance of high repetition-rate laser jamming laser seeker[J]. Aerospace Electronic Warfare 2005,21(5):23-25(in Chinese).
[5]	SUN Y F, YE J S, HAO Y J. Research on counter-laser-guided missile on artillery field[J].Infrared and Laser Engineering,2007,36(s2):464-467(in Chinese).
[6]	HUANG F, WANG Y F, WANG J Y, et al. Study on application of high-repetition-rate solid state lasers in photoelectric countermeasrue[J]. Infrared and Laser Engineering,2003,32(5):465-467 (in Chinese).
[7]	ZHANG H W, ZHAO W, JI X, et al. Jamming effect of the high repetition frequency laser to the laser seeker[J].Elector-optic Technology Application,2009,24(1):26-28(in Chinese).
[8]	WEI W J, QIN Sh Q, ZHAN D J, et al. Research on laser encoding in laser semi-active homing guidance[J].Laser ＆ Infrared, 2008, 38(12):1199-1203(in Chinese).
[9]	JU Y F, MA B Q,YAO M, et al. Encoding and jamming technology for laser guidance signal[J]. Electronics Optics ＆ Control, 2007,14(1):85-86(in Chinese).
[10]	WEI W J. Key techniques and system study on HWIL simulation for laser guidance and electro-optical countermeasures[D]. Changsha: National University of Defese Technology,2010: 98-102(in Chinese).
[11]	XU D Sh, XING H. The design and application of laser enconing[J].Electronic Countermeasure Test,2002,38(2):18-21(in Chinese).

Effect of high repetition frequency on laser decoding recognition process

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Proportional views