Citation: | CAO Yun-jiu, LIU Ye, CHEN Guang-long, XU Hong-xia. 圆柱体腔振动稳定性研究[J]. LASER TECHNOLOGY, 2012, 36(2): 262-264. DOI: 10.3969/j.issn.1001-3806.2012.02.031 |
[1] |
TAKAMOTO M,HONG F L,HIGASHI R,et al.An optical lattice clock[J].Nature,2005,435(7040):321-324.
|
[2] |
TAN Zh Q,LONG X W.Influence of cavity length change on measurement of CW cavity ring-down[J].Laser Technology,2007,31(4):438-441(in Chinese).
|
[3] |
HU Ch X,ZHENG M,DENG T,et al.Influence of air gap on the lasing wavelength of the fiber grating external cavity semiconductor laser[J].Laser Technology,2008,32(2):177-179(in Chinese).
|
[4] |
LIN X.Alternative scheme for generation of atomic Schródinger cat states and entangled coherent states in an optical cavity[J].Communications in Theoretical Physics,2010(5):927-930.
|
[5] |
TAN Zh Q,LONG X W.Design of driving circuits of semiconductor lasers for measurement of continuous-wave cavity ring-down technology[J].Laser Technology,2008,32(1):27-29(in Chinese).
|
[6] |
ZHOU H Q,XIA G Q,DENG T,et al.Influence of external cavity length variation on the lasing wavelength of the fiber grating external cavity semiconductor laser[J].Laser Technology,2005,29(5):476-477(in Chinese).
|
[7] |
YOUNGB C,CRUZ F C,ITANO W M,et al.Visible lasers with subhertz linewidths[J].Physical Review Letters,1999,82(19):3799-3802.
|
[8] |
SUN X T,LIU J Q,ZHOU J,et al.Confocal Fabry-Perot interferometer for frequency stabilization of laser[J].Chinese Journal of Lasers,2008,35(7):1005-1008(in Chinese).
|
[9] |
MIAO J.Study of vibration sensitivity of optical cavities used for stable and narrow line width laser system[D].Shanghai:East China Normal University,2008:16-28(in Chinese).
|
[10] |
YANG T.Researching the stabilization of ultra stable Fabry-Perot cavities[D].Beijing:Beijing Jiaotong University,2007:15-28(in Chinese).
|
[11] |
CHEN L S,HALL J L,YE J.Vibration-induced elastic deformation of Fabry-Perot cavities[J].Physical Review,2006,A74(5):053801/1-053801/13.
|
[12] |
YANG T,LI W B,ZANG E J,et al.Decreased vibrational susceptibility of Fabry-Perot cavities via designs of geometry and structural support[J].Chinese Physics,2007,16(5):1374-1385.
|
[1] | YE Sen, LONG Yun, WANG Ruquan, CAO Qiang, XIAO Sanqiang, ZHAO Hongming, DU Jian. A numerical optimization method for ultra-stable optical cavities[J]. LASER TECHNOLOGY, 2016, 40(6): 871-875. DOI: 10.7510/jgjs.issn.1001-3806.2016.06.020 |
[2] | YU Xiao-qiu, LI Ming-zhong, WANG Jian-jun, GENG Yuan-chao, XU Dang-peng, LIN Hong-huan, ZHANG Rui, HUANG Xiao-dong. Characteristic analysis of gain guided index antiguided large-mode-area fiber lasers[J]. LASER TECHNOLOGY, 2011, 35(1): 25-28,78. DOI: 10.3969/j.issn.1001-3806.2011.01.008 |
[3] | LIU Guo-hua, LIU De-ming. Numerical analysis of Raman effects in high power fiber lasers[J]. LASER TECHNOLOGY, 2007, 31(3): 298-300,321. |
[4] | OU Pan, ZHANG Chun-xi, YAN Ping, GONG Ma-li. Numerical analysis for multi-position-pumped double-clad fiber lasers[J]. LASER TECHNOLOGY, 2007, 31(2): 150-152,178. |
[5] | MEI Lin, WANG Ying, WANG Zhen-jia, PENG Wei-hong. Numerical analysis of the transient-state behavior of Yb3+-doped double-clad fiber laser[J]. LASER TECHNOLOGY, 2006, 30(3): 225-227,231. |
[6] | TIAN Yong-sheng, CHEN Chuan-zhong, WANG De-yun, XU Ying, LEI Ting-quan. Analysis of the growth mechanism of TiC crystal and the mechanical properties of the laser alloyed layer on the surface of pure titanium[J]. LASER TECHNOLOGY, 2005, 29(2): 113-115,137. |
[7] | Wu Wan-liang, Huang Wen-rong, . Microstructure of laser clad Ti+TiC powders on Ti-6Al-4V alloy substrate[J]. LASER TECHNOLOGY, 2003, 27(4): 307-310. |
[8] | Sun Ronglu, Guo lixin, Dong Shangli, Yang Dezhuang. Study on laser cladding of NiCrBSi (Ti)-TiC metal-ceramiccomposite coatings on titanium alloy[J]. LASER TECHNOLOGY, 2001, 25(5): 343-346. |
[9] | Li Anying, Yang Yapei. Review of the new development of beam propagation method for analysis of optical waveguide[J]. LASER TECHNOLOGY, 2000, 24(4): 236-240. |
[10] | Zhang Siyu, Wang Biben, Zheng Kequan. Study of laser smelting-cladding WC-TiC-SiC-Co on carbon steel surface[J]. LASER TECHNOLOGY, 1994, 18(2): 110-113. |