Design and analysis of the cladding powder for laser direct writing signs
-
1.
College of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
-
Corresponding author:
LIU Shun-hong, liushunhong@sina.com
;
-
Received Date:
2010-06-10
Accepted Date:
2010-07-12
-
Abstract
In order to develop special cladding powder for laser direct writing signs,and obtain convex shaped logo on weathering steel Q450NQR1 used in railway freight cars,based on uniform design and optimization,the composition of alloy powder was analyzed in theory and confirmed in experiments,and the data of appearance,hardness,corrosion weight loss and corrosion loss rate were obtained for different component.The results indicate that when the mass fraction of alloy composition is w(Ni)=0.20～0.22,w(Cr)=0.14～0.155,w(Si)=0.01～0.015,w(B)=0.005～0.006,and Fe as the remainder,the obtained cladding layer has beautiful appearance,metallurgical bonding with the substrate,and better atmospheric corrosion resistance than the base metal.The result is helpful for application of the system of laser direct writing signs on railway wagons industry.
-
-
References
|
[1]
|
CHEN J B.Principles and techniques of laser[M].Beijing:Publishing House of Electronics Industry,2004:165-166(in Chinese). |
|
[2]
|
LI Sh,HU Q W,ZENG X Y,et al.Research development of Febased alloy powder for laser cladding[J].Laser Technology,2004,28 (6):591-594 (in Chinese). |
|
[3]
|
HERNANDEZ J,VANNES A.Laser surface cladding and residual stres[C]//Preceedings of the 3rd International Conference on Lasers in Manufacturing.Paris:Springer Verlag,1986:181-190. |
|
[4]
|
DURANTON P,DEVAUX J,ROBIN V,et al.3-D modeling of multi-pass welding of a 316L stainless steel pipe[J].Journal of Materials Processing Technology,2004,153/154:457-463. |
|
[5]
|
HUM L,XIE Ch Sh,HUANG K J,et al.Measurement of residual stress in multi-track laser-clad coating[J].Laser Technology,2006,30(3):262-270(in Chinese). |
|
[6]
|
TANG Y,WANG Y Sh,SHUI R L,et al.Development of Ni-based powder alloy for self melting laser cladding[J].Journal of Tianjin Polytechnic University,2003,22 (5):52-55 (in Chinese). |
|
[7]
|
ZHANG W Y.Welding metallurgy (basic principle)[M].Beijing:China Metallurgical Industry Press,2005:57-60(in Chinese). |
|
[8]
|
ZHU R Sh.Investigation on self fluxing alloy powders[J].Powder Metallurgy Industry,2000,10(2):7-14(in Chinese). |
|
[9]
|
ZHAOHY,WU X L,CHENGL,et al The design and study on the iron-based wear-resistant laser cladding alloy[J].Applied Laser,1999,19(5):209-213(in Chinese). |
|
[10]
|
QIAN Y H,LI Z G.Research on corrosion resistance of high strength weathering steel Q450NQR1 in accelerated corrosion environment[J].Baosteel Technology,2007 (2):5-8 (in Chinese). |
|
[11]
|
ZHANG H Sh,WU Y L.Experimental study of signs producing by laser cladding[J].Locomotive Rolling Stock Technology,2010,1(5):6-8 (in Chinese). |
|
[12]
|
XU X L,XU Ch M.Development of weather-resistant steel and its surface treatment technique[J].Angang Technology,2007 (3):18-21 (in Chinese). |
|
[13]
|
SHI Sh H,FU G Y.Study on corrosion resistance of laser cladding layer on stainless steel surface[J].Heat Treatment on Metals,1999(3):14-16(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: