Study on 3-D joint seam tracking control in non-ferrous metal complicated curve surface laser welding
-
1.
State Engineering Research Center of Manufacturing Equipment Digitization, Huazhong University of Science and Technology, Wuhan 430074, China
-
Received Date:
2010-05-10
Accepted Date:
2010-05-13
-
Abstract
In order to realize 3-D joint seam tracking accurately in the process of non-ferrous metal complicated curve surface laser welding, the 3-D joint seam real-time measurement was adopted to compensate for the joint seam deformation dynamically. The control arithmetic and key technologies for 3-D seam welding-measuring integration control system were studied,including the mathematics model of motion control, the scheme of welding path and measuring path,the real time inspection and dynamic compensation in welding, etc.The proposed arithmetic was testified by the experiment in which the non-ferrous metal with less than 3mm thickness was welded by 4kW fiber laser. The test indicates that the 3-D joint seam welding-measuring integration control system can achieve the 3-D joint seam's online inspection, real time welding and dynamic compensation quickly and precisely, which satisfies the measuring system's precision requirement.
-
-
References
|
[1]
|
CHEN Zh X,SONG Y L,ZHANG J.Laser vision sensing based adaptive welding for aluminum alloy[J].Journal of Beijing University of Technology,2006,32(8):714-718(in Chinese). |
|
[2]
|
WANG Ch M,HU L J,HU X Y.Design of multi-sensor on-line monitoring system for laser welding[J].Laser Technology,2007,31(5):503-506(in Chinese). |
|
[3]
|
ZHU Q Y,WU S P,HU L J.Coaxial real time monitoring of gap defect in CO2 laser welding process[J].Laser Technology,2006,30(5):455-461(in Chinese). |
|
[4]
|
MILLER M,MI B,KITA A,et al.Development of automated real-time data acquisition system for robotic weld quality monitoring[J].Mechatronics,2002,12(9/10):1259-1269. |
|
[5]
|
SUN F Ch,LI H X,LI L.Robot discrete adaptive control based on dynamic inversion using dynamical neural networks[J].Automatica,2002,38(11):1977-1983. |
|
[6]
|
XU D,TAN M,LI Y.Visual measurement and control for robots[M].Beijing:National Defense Industry Press,2008:282-291(in Chinese). |
|
[7]
|
WU J Y,WANG P J.Vision system of butt joint gap width measurement for laser welding[J].Transactions of the China Welding Institution,2009,19(8):105-108(in Chinese). |
|
[8]
|
WANG H H,YU G,PANG M,et al.Cylinder welding control technology of Integrated laser manufacturing system[J].Chinese Journal of Lasers,2007,34(11):1571-1576(in Chinese). |
|
[9]
|
PHANIKUMAR G,MANJINI S,DUTIA P,et al.Characterization of a continuous CO2 laser-welded Fe-Cu dissimilar couple[J].Metallurgical and Materials Transactions,2005,A36(8):2137-2147. |
|
[10]
|
YANG W G,LIU Ch,CHEN W Zh,et al.Study on the control system for the weld appearance quality during laser welding with filler wire[J].Laser Technology,2003,27(3):193-196 (in Chinese). |
-
-
Proportional views
-
Map
DownLoad: