Citation: | CAI Han-ming, ZHANG Yu-fang, LIU Zhong-bo. Motion analysis of cam with laser quenching heat treatment[J]. LASER TECHNOLOGY, 2010, 34(6): 812-815. DOI: 10.3969/j.issn.1001-3806.2010.06.025 |
[1] |
SHI Y G,WU Y F.Design and application innovation of cam mechanism[M].Beijing:China Machine Press,2007:1-18(in Chinese).
|
[2] |
ZHANG Y K,ZHOU J Zh,YE Y X.Laser processing technology[M].Beijing:Chemical Industry Press,2004:106-122(in Chinese).
|
[3] |
ZHANG G Sh.Modern laser manufacturing technology[M].Beijing:Chemical Industry Press,2006:164-181(in Chinese).
|
[4] |
LEE S H,YANG Y S.Sensitivity analysis of processing parameters by direct differentiation method for laser surface hardening treatment[J].Materials and Manufacturing Processes,2001,16(3):353-374.
|
[5] |
SU H L,XU M,DU J W,et al.Study on laser heat-treatment process of number control machine-tools axle[J].Hot Working Technology,2008,37(4):67-68(in Chinese).
|
[6] |
LI E L.Principle and application of numerical control technology[M].Beijing:National Defense Industry Press,2006:117-120(in Chinese).
|
[7] |
WANG L J,WU M Y.CNC machining technology and equipment[M].Beijing:Tsinghua University Press,2006:305-312(in Chinese).
|
[8] |
WU G,SONG G M,HUANG W J.Influence of laser processing parameters on the case-depth and the hardness[J].Laser Technology,2007,31(2):163-165(in Chinese).
|
[9] |
HILL F S,Jr.Computer graphics[M].Beijing:Tsinghua University Press,2006:601-675(in Chinese).
|
[10] |
HU Q W,YANG T P,LI P,et al.Fabrication and affecting factors of metallic parts by means of laser freeforming[J].Laser Technology,2007,31(4):403-405(in Chinese).
|