Temperature inter-compensation for single-line optical fiber sensors based on Brillouin and fiber Bragg grating technique
-
1.
School of Civil Engineering, Harbin Institute of Technology, Harbin 150090, China;
-
2.
School of Civil and Hydraulic Engineering, Dalian University of Technology, Dalian 116024, China
-
Corresponding author:
ZHOU Zhi, zhouzhi@hit.edu.cn
;
-
Received Date:
2008-11-06
Accepted Date:
2008-12-12
-
Abstract
In order to solve the problems that absolute temperature compensation for strain sensing of single line optical fiber sensors based on Brillouin and fiber Bragg grating encounters, e.g. high cost and difficulty of installation, a novel temperature inter-compensation method was presented. Based on a sensor, i.e,a dual fiber reinforced polymer-fiber Bragg grating rebar, experiments were carried out under room and outdoor environments. The results show that the temperature inter-compensation can be easily realized with a practically acceptable error less than 8%. Moreover this method can also give the dual parameters of strain and temperature values simultaneously. The system based on optical fiber sensors is suitable for practical applications for its simple structure and low cost.
-
-
References
|
[1]
|
DANIELE I,BRANKO G.Reliability and field testing of distributed strain and temperature sensors[J].Proc SPIE,2006,6167:1-8. |
|
[2]
|
ZHOU Zh,OU J P.Various types of optical FBG sensors and their applications of SHM[C]//Proceeding of the 2nd International Conference on Structural Health Monitoring and Intelligent Infrastructures.London:Taylor&Francisl Balkema,2005:489-498. |
|
[3]
|
ZHAO X F,TIAN Sh Zh,OU J P,et al.Research on strain monitoring of reinforced concrete structure using fiber Bragg grating[J].Laser Technology,2003,27(3):233-235(in Chinese). |
|
[4]
|
YU Q R,BAO X Y,CHEN L.Simultaneous strain and temperature measurement in PM fibers using Brillouin frequency,power,and bandwidth[J].Proc SPIE,2004,5391:301-307. |
|
[5]
|
YOSHIYUKI S,HARUYOSHI U,LI Zh X,et al.A system for measuring temperature and strain separately by BOTDR and OTDR[J].Proc SPIE,2002,4920:274-284. |
|
[6]
|
KELLIE B,ANTHONY W B,BRUCE G C.Combined Raman and Brillouin scattering sensor for simultaneous high-resolution measurement of temperature and strain[J].Proc SPIE,2006,6167:1-10. |
|
[7]
|
ZHOU Zh.R&D of series FBG-based products and their applications in infrastructures[D] .Harbin:Harbin Institute of Technology,2006:102-103(in Chinese). |
|
[8]
|
DAVIS M A,KERSEY A D.Separating the temperature and straineffects on fiber Bragg grating sensors using stimulated Brillouin scattering[J].Proc SPIE,1997,2718:270-278. |
|
[9]
|
ZHOU Zh,HE J P,YAN K,et al.Fiber-reinforced polymer-packaged optical fiber sensors based on Brillouin optical time-domain analysis[J].Opt Engng,2008,47(1):014401-014410. |
|
[10]
|
ZHANG X Zh.R&D of various FBG sensors for practical application in infrastructures[D] .Harbin:Harbin Institute of Technology,2006:41-51(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: