Fabrication of novel graphene/silver-based contacts using laser processing and the physical properties

YANG Qianqian; LIU Yuan; YE Xiaohui; QIANG Hao; SHAO Xinghai; CAO Lei

doi:10.7510/jgjs.issn.1001-3806.2023.06.006

LASER TECHNOLOGY > 2023 > 47(6): 766-771. > DOI: 10.7510/jgjs.issn.1001-3806.2023.06.006

YANG Qianqian, LIU Yuan, YE Xiaohui, QIANG Hao, SHAO Xinghai, CAO Lei. Fabrication of novel graphene/silver-based contacts using laser processing and the physical properties[J]. LASER TECHNOLOGY, 2023, 47(6): 766-771. DOI: 10.7510/jgjs.issn.1001-3806.2023.06.006

Citation:

PDF (6660 KB)

Fabrication of novel graphene/silver-based contacts using laser processing and the physical properties

1.
School of Materials Science and Engineering, Tsinghua University, Beijing 100083, China
2.
School of Materials Science and Engineering, Shaanxi University of Science and Technology, Xi'an 710000, China
3.
Qingyan Advanced Manufacturing Industry Research Institute (Luoyang) Co. Ltd., Luoyang 471000, China

More Information

Received Date: November 08, 2022
Revised Date: January 17, 2023
Published Date: November 24, 2023

Graphical Abstract

Abstract

Abstract

In order to solve the problem of silver-based contacts in low-voltage devices, which were prone to fusion and ablation, leading to insufficient electrical life, a new graphene/silver-based composite contact was prepared by the laser method. A fully covered graphene film was prepared on the surface of commercial AgNi₁₅ contacts by laser cladding technology as a stand-alone coating to resist environmental damage. Theoretical analysis and experimental verification were carried out to obtain the optimal process conditions and corresponding performance data. The results demonstrate that the hardness of graphene/silver composite contact is 104.05 HV, the density is 9.15 g/cm³, and the contact resistance is 0.016 Ω. The new solution protocol and experimental bases have been provided for the fabrication of high-performance low-pressure contacts in this study.
- laser technique,
- graphene/silver-based contact,
- nanosecond laser processing,
- contact performance

FullText(HTML)

References (26)

References

[1]	韩春阳, 王召斌, 王占, 等. 触头材料及其性能测试技术概述[J]. 电工材料, 2019, 47(1): 27-30. DOI: 10.16786/j.cnki.1671-8887.eem.2019.01.006 HAN Ch Y, WANG Zh B, WANG Zh, et al. Development of contact material and its performance testing technology[J]. Electrical Engineering Materials, 2019, 47(1): 27-30(in Chinese). DOI: 10.16786/j.cnki.1671-8887.eem.2019.01.006
[2]	蒋德志, 章杰, 白娅玲, 等. AgNi触头材料应用性能及其主要制备工艺[J]. 电工材料, 2014, 42(3): 19-23. DOI: 10.3969/j.issn.1671-8887.2014.03.005 JIANG D Zh, ZHANG J, BAI Y L, et al. Application performance and preparation technology of AgNi contact materials[J]. Electrical Engineering Materials, 2014, 42(3): 19-23(in Chinese). DOI: 10.3969/j.issn.1671-8887.2014.03.005
[3]	李庆楠, 薄凯, 周学, 等. 低速分断条件下银基触头材料液桥特性试验研究[J]. 电器与能效管理技术, 2016, 58(15): 54-58. https://www.cnki.com.cn/Article/CJFDTOTAL-DYDQ201615012.htm LI Q N, BAO K, ZHOU X, et al. Experimental study on feature of molten bridge of silver based contacts under slow separation[J]. Electrical & Energy Management Technology, 2016, 58(15): 54-58(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-DYDQ201615012.htm
[4]	郭天福, 付翀, 王俊勃, 等. 含添加剂的AgNi触头材料研究进展[J]. 电工材料, 2015, 58(2): 34-38. DOI: 10.3969/j.issn.1671-8887.2015.02.008 GUO T F, FU Ch, WANG J B, et al. Research and progress of silver-nickel contact materials containing additives[J]. Electrical Engineering Materials, 2015, 58(2): 34-38(in Chinese). DOI: 10.3969/j.issn.1671-8887.2015.02.008
[5]	陈宏燕, 谢明, 王锦, 等. 银氧化锡电触头材料研究现状及发展趋势[J]. 贵金属, 2011, 32(2): 77-81. DOI: 10.3969/j.issn.1004-0676.2011.02.016 CHEN H Y, XIE M, WANG J, et al. The advances and developmental trend of Ag/SnO₂ electrical contact material[J]. Precious Metals, 2011, 32(2): 77-81(in Chinese). DOI: 10.3969/j.issn.1004-0676.2011.02.016
[6]	ZEER G M, ZELENKOVA E G, SIDORAK A V, et al. A silver-based electrocontact material dispersion-strengthened with zinc, tin, and titanium oxides[J]. Technical Physics, 2020, 65(8): 1253-1260. DOI: 10.1134/S106378422008023X
[7]	BIYIK S, ARSLAN F, AYDIN M. Arc-erosion behavior of boric oxide-reinforced silver-based electrical contact materials produced by mechanical alloying[J]. Journal of Electronic Materials, 2015, 44(1): 457-466. DOI: 10.1007/s11664-014-3399-4
[8]	HE Q, YANG H, CHEN L, et al. Study on the mechanical alloying process for preparing Ag/LSCO electrical contact material[J]. Procedia Engineering, 2014, 94: 37-43. DOI: 10.1016/j.proeng.2013.11.047
[9]	LIU Y, GAO M, XU S, et al. Study on electroconductive tribological properties of Ag-based composite coating[J]. International Journal of Precision Engineering and Manufacturing, 2019, 20(8): 1405-1413. DOI: 10.1007/s12541-019-00140-x
[10]	HAO X, WANG X, ZHOU S, et al. Microstructure and properties of silver matrix composites reinforced with Ag-doped graphene[J]. Materials Chemistry and Physics, 2018, 215: 327-331. DOI: 10.1016/j.matchemphys.2018.05.036
[11]	WANG P, WEI Z, SHEN M, et al. In-situ synthesized silver-graphene nanocomposite with enhanced electrical and mechanical pro-perties[C]//IEEE Holm Conference on Electrical Contact. Denver, USA: Institute of Electrical and Electronics Engineers, 2017: 225-228.
[12]	NAGHDI S, RHEE K Y, PARK S J. A catalytic, catalyst-free, and roll-to-roll production of graphene via chemical vapor deposition: Low temperature growth[J]. Carbon, 2018, 127: 1-12.
[13]	LIN L, DENG B, SUN J Y, et al. Bridging the gap between reality and ideal in chemical vapor deposition growth of graphene[J]. Chemical Reviews, 2018, 118(18): 9281-9343.
[14]	管振宏, 于镇洋, 乔志军, 等. 化学气相沉积法制备原位生长三维石墨烯/铜基复合材料[J]. 材料科学与工程学报, 2021, 39(4): 575-579. https://www.cnki.com.cn/Article/CJFDTOTAL-CLKX202104007.htm GUAN Zh H, YU Zh Y, QIAO Zh J, et al. Preparation of irrsitu growth three-dimensional Cu@graphene composite by chemical vapor deposition[J]. Journal of Materials Science & Engineering, 2021, 39(4): 575-579(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-CLKX202104007.htm
[15]	孙正阳, 季凌飞, 林真源, 等. 激光分解4H-SiC制备石墨烯层的晶面取向影响研究[J]. 中国激光, 2020, 47(8): 0802002. https://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ202008006.htm SUN Zh Y, JI L F, LIN Zh Y, et al. Effect of crystal orientation on synthesis of graphene layers by laser decomposition of 4H-SiC[J]. Chinese Journal of Lasers, 2020, 47(8): 0802002(in Chinese). https://www.cnki.com.cn/Article/CJFDTOTAL-JJZZ202008006.htm
[16]	叶晓慧. 激光快速原位制备石墨烯及其耐腐蚀性研究[D]. 北京: 清华大学, 2015: 35-59. YE X H. Rapid laser in-situ growth of graphene and its anti-corrosion performance[D]. Beijing: Tsinghua University, 2015: 35-59(in Chinese).
[17]	YE X H, LONG J Y, LIN Zh, et al. Direct laser fabrication of large-area and patterned graphene at room temperature[J]. Carbon, 2014, 68: 784-790.
[18]	YE X H, LIN Zh, ZHANG H J, et al. Protecting carbon steel from corrosion by laser in situ grown graphene films[J]. Carbon, 2015, 94: 326-334.
[19]	刘壮, 方菊, 李元成, 等. 飞秒激光加工SiC/SiC复合材料厚板的孔型特征研究[J]. 激光技术, 2022, 46(6): 736-741. DOI: 10.7510/jgjs.issn.1001-3806.2022.06.004 LIU Zh, FANG J, LI Y Ch, et al. Pore characteristics of SiC/SiC composite thick plate machined by femtosecond laser[J]. Laser Technology, 2022, 46(6): 736-741(in Chinese). DOI: 10.7510/jgjs.issn.1001-3806.2022.06.004
[20]	李镭昌, 魏昕. 激光熔覆复合涂层WC对裂纹产生机理影响研究[J]. 激光技术, 2023, 47(1): 52-58. DOI: 10.7510/jgjs.issn.1001-3806.2023.01.008 LI L Ch, WEI Ch. Influence of WC on crack formation mechanism of laser cladding composite coating[J]. Laser Technology, 2023, 47(1): 52-58(in Chinese). DOI: 10.7510/jgjs.issn.1001-3806.2023.01.008
[21]	周辽, 龙芋宏, 焦辉, 等. 激光加工碳纤维增强复合材料研究进展[J]. 激光技术, 2022, 46(1): 110-119. DOI: 10.7510/jgjs.issn.1001-3806.2022.01.011 ZHOU L, LONG Y H, JIAO H, et al. Research advancement on laser processing carbon fiber reinforced plastics[J]. Laser Technology, 2022, 46(1): 110-119(in Chinese). DOI: 10.7510/jgjs.issn.1001-3806.2022.01.011
[22]	徐国辉, 李喜春, 董彬, 等. 激光制备新型石墨烯/铜基复合触头[J]. 激光技术, 2023, 47(2): 225-232. DOI: 10.7510/jgjs.issn.1001-3806.2023.02.011 XU G H, LI X Ch, DONG B, et al. A novel graphene/copper hybrid electrical contact fabrication by laser processing[J]. Laser Technology, 2023, 47(2): 225-232(in Chinese). DOI: 10.7510/jgjs.issn.1001-3806.2023.02.011
[23]	王振宇. 银镍、银铁电触头技术条件: GB/T 5588-2017[S]. 北京: 中国标准出版社, 2017. WANG Zh Y. Technical specification for silver-nickel, silver-iron electrical contacts: GB/T 5588-2017[S]. Beijing: China Standard Press, 2017(in Chinese).
[24]	LIN Zh J, FAN S Y, LIU M M, et al. Excellent anti-arc erosion performance and corresponding mechanisms of a nickel-belt-reinforced silver-based electrical contact material[J]. Journal of Alloys and Compounds, 2019, 788: 163-171.
[25]	FERRARI A C, MEYER J C, SCARDACI V, et al. Raman spectrum of graphene and graphene layers[J]. Physical Review Letters, 2006, 97(18): 187401.
[26]	BLEU Y, BOURQUARD F, LOIR A S, et al. Raman study of the substrate influence on graphene synthesis using a solid carbon source via rapid thermal annealing[J]. Journal of Raman Spectroscopy, 2019, 50(11): 1630-1641.

Cited By

Cited by

Periodical cited type(1)

李雨阳，陈志鹏，李革民，程继贵. 多层石墨烯增强银铜电刷材料的制备和组织性能. 粉末冶金工业. 2024(06): 20-25 .

Other cited types(0)

Get Citation

PDF

XML

Article views (14) PDF downloads (8) Cited by(1)

Turn off MathJax

Article Contents

Abstract

References

Fabrication of novel graphene/silver-based contacts using laser processing and the physical properties

Abstract

References

Cited by

Periodical cited type(1)

Other cited types(0)

Catalog

Links：

Fabrication of novel graphene/silver-based contacts using laser processing and the physical properties

Abstract

References

Cited by

Periodical cited type(1)

Other cited types(0)

Catalog

Links：

Export File

Citation

Format

Content