Advanced Search
LIU Hui, ZHANG Chunbo, LU Jinnan, ZHANG Jinru. Coal gangue loading volume measurement method based on laser triangulation[J]. LASER TECHNOLOGY, 2021, 45(5): 630-635. DOI: 10.7510/jgjs.issn.1001-3806.2021.05.016
Citation: LIU Hui, ZHANG Chunbo, LU Jinnan, ZHANG Jinru. Coal gangue loading volume measurement method based on laser triangulation[J]. LASER TECHNOLOGY, 2021, 45(5): 630-635. DOI: 10.7510/jgjs.issn.1001-3806.2021.05.016

Coal gangue loading volume measurement method based on laser triangulation

More Information
  • Received Date: September 01, 2020
  • Revised Date: October 26, 2020
  • Published Date: September 24, 2021
  • In order to solve the problems of low efficiency and high cost in weighing coal gangue loading, a non-contact coal gangue loading volume measurement method based on laser triangulation was proposed. First, the laser stripe information projected by the laser on the surface of the moving carriage full of coal gangue was continuously collected using the CCD camera. The target area of the image was extracted through median filtering method and threshold segmentation method based on Otsu algorithm during the image pre-process at the same time. Then the center line of the laser stripes were extracted using skeleton-based gray barycentric method. Finally, the Riemann integral method is used to calculate the coal gangue loading of the vehicle. The results show that the error of the system results is controlled within 4%, which meets the requirements of system operation, confirming the feasibility and practicability of the measurement method. This research provides a reference for the load measurement of highway transportation management in complex environments.
  • [1]
    WU Y H. Current status and prospects of the disposal and utilization of coal gangue in my country[J]. China Environmental Protection Industry, 2019(1): 53-55(in Chinese). http://en.cnki.com.cn/Article_en/CJFDTotal-ZHBY201901013.htm
    [2]
    LIU K, MA Y D, HOU X K. Environmental hazards and comprehensive utilization status of coal gangue in my country[J]. Coal, 2013, 22(5): 59-61(in Chinese).
    [3]
    WANG Zh J, SHENG W T, XIE J Y, et al. Research on cylindrical object positioning and measurement based on linear laser triangulation [J]. Laser Technology, 2019, 43(4): 28-34(in Chinese). http://en.cnki.com.cn/Article_en/CJFDTotal-JGJS201904006.htm
    [4]
    WANG Ch Y, HUANG T. Design and realization of indoor high-speed laser triangulation ranging technology[J]. Laser Technology, 2017, 41(6): 891-896(in Chinese).
    [5]
    WEI Zh Zh, CAO L J, ZHANG G J. A novel 1-D target-based cali- bration method with unknown orientation for structured light vision sensor[J]. Optics and Laser Technology, 2009, 42(4): 570-574. http://www.sciencedirect.com/science/article/pii/S0030399209002175
    [6]
    LI H Ch. Research on the material volume measurement method based on laser triangulation [D]. Hefei: Hefei University of Technology, 2015: 1-47(in Chinese).
    [7]
    JIANG L. Laser triangulation displacement measurement system with dual optical path symmetry compensation [D]. Hangzhou: Zhejiang University, 2017: 1-6(in Chinese).
    [8]
    ZHU Y. A three-dimensional profile measurement system based on laser triangulation[D]. Hefei: Hefei University of Technology, 2018: 1-8(in Chinese).
    [9]
    MAO J H, LOU X P, LI W X, et al. Binocular 3-D volume measurement system based on line structured light[J]. Optics Technology, 2016, 42(1): 10-15(in Chinese). http://en.cnki.com.cn/Article_en/CJFDTOTAL-GXJS201601003.htm
    [10]
    LI P. Research on dynamic measurement system of bulk materials based on machine vision [D]. Beijing: China University of Mining and Technology, 2017: 19-26(in Chinese).
    [11]
    LIU Y, SUN Sh Y. Laser point cloud filtering denoising based on principal component analysis and surface fitting[J]. Laser Technology, 2020, 44(4): 497-502(in Chinese).
    [12]
    CAO G Q, LIU Y T, WANG L L. Improving the filtering processing of non-subsampled contour waves in speckle fringes[J]. Laser Technology, 2019, 43(2): 269-274(in Chinese).
    [13]
    ZHOU Y K, ZHU Y P, ZENG B Z, et al. Overview of wide dynamic infrared image enhancement algorithms[J]. Laser Technology, 2018, 42(5): 718-726(in Chinese).
    [14]
    GENG Q M, WU G X, XU X L, et al. Application of adaptive median filter and wavelet transform to dongba manuscript images denoising[C]//IEEE International Conference on Electronic Measurement & Instruments (ICEMI). New York, USA: IEEE, 2017: 942- 946.
    [15]
    GONZALEZ R, WOODS R. Digital image processing[M]. 2nd ed. New Jersy, USA: Prentice Hall, 2002: 612-615.
    [16]
    WANG H W, LIANG Y Y, WANG Zh H. Otsu image threshold segmentation method based on new genetic algorithm[J]. Laser Technology, 2014, 38(3): 364-367 (in Chinese). http://en.cnki.com.cn/Article_en/CJFDTOTAL-JGJS201403017.htm
    [17]
    LI Zh H, GUO L, YAN J H, et al. Research on the algorithm for extracting the center of line structured light strip[J]. Journal of Inner Mongolia University of Science and Technology, 2019, 38(3): 252-257 (in Chinese).
    [18]
    LIANG Y L, DUAN F J. A method for extracting the center line of light strips based on density clustering [J]. Laser Technology, 2020, 44(4): 459-465(in Chinese).
    [19]
    HUANG L F, LIU G D, ZHANG Ch, et al. Laser stripe center extraction algorithm based on gray-scale weight model [J]. Laser Technology, 2020, 44(2): 190-195(in Chinese).
    [20]
    LIU Ch J, LI B, GUO Y, et al. Research on fast extraction algorithm of light bar in real-time guidance of welding robot[J]. Laser Technology, 2015, 39(5): 642-647(in Chinese).
    [21]
    WU Q Y. A study for key techniques of 3D-sensor based on line- structure light[D]. Chengdu: Sichuan University, 2006: 82-84(in Chinese).

Catalog

    Article views (7) PDF downloads (6) Cited by()

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return