| Citation: |
ZHANG Chong, WANG Guan, YANG Zhigang, LIU Zanfeng. Optimization of technology parameters for fracture splitting grooves of connecting rods fabricated by pulse fiber laser[J]. LASER TECHNOLOGY, 2018, 42(3): 422-426. DOI: 10.7510/jgjs.issn.1001-3806.2018.03.025
|
| [1] |
KOU Sh Q, WANG J W, JIAN X X, et al. YAG laser cutting on sharp fracture splitting notch of connecting rod[J]. Optics and Precision Engineering, 2010, 18(6): 1340-1346(in Chinese). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gxjmgc201006014
|
| [2] |
ZHENG Q F. Research on laser processing fracture splitting groove technologyand automation equipment for engine connecting rod[D]. Changchun: Jilin University, 2011: 6-8(in Chinese).
|
| [3] |
YANG H Y. Numerical simulation of connecting rod fracture processand analysis on main fracture splitting defects[D]. Changchun: Jilin University, 2014: 9-10(in Chinese).
|
| [4] |
ZHAO Y. Study on parameters of connecting rod fracture splitting basedon fracture after small scale yielding and its application[D]. Changchun: Jilin University, 2011: 53-60(in Chinese).
|
| [5] |
YANG Q T. Multi-scale simulation study on propagation of connecting rod crack by wire cut electrical discharge machining[D]. Guangzhou: Guangdong University of Technology, 2016: 10-20(in Chin-ese).
|
| [6] |
WANG J W. Numerical simulation and experimental study on pulsed laser processing fracture pplitting notch of con-rod/crankcase bearing block[D]. Changchun: Jilin University, 2011: 89-105(in Chin-ese).
|
| [7] |
YANG Sh H, ZHANG Zh Q, KOU Sh Q, et al. Technological parameters in the laser cutting process of starting notch of connecting rod[J]. Journal of Harbin in Institute of Technology, 2009, 41(1):126-130(in Chinese). http://en.cnki.com.cn/Article_en/CJFDTOTAL-HEBX200901030.htm
|
| [8] |
SUN J G, LI Sh, HE Zh Y, et al. Study on orthogonal processing experiment of light absorbing coatings for laser micro-dimple[J]. Laser Technology, 2016, 40(6): 907-911(in Chinese). http://en.cnki.com.cn/Article_en/CJFDTotal-JGJS201606027.htm
|
| [9] |
ZHENG Q F, YANG Sh H, DENG Ch P, et al. Manufacture of connecting-rod initial splittingnotch by Nd:YAG solid laser[J]. Optics and Precision Engineering, 2010, 18(1): 142-147(in Chinese). http://en.cnki.com.cn/Article_en/CJFDTotal-GXJM201001021.htm
|
| [10] |
LIU Z Y, WEI X, XIE X Zh, et al. Experimental study about micro texture on tool surface processed by UV laser ceramic[J]. Laser Technology, 2016, 40(4): 550-554(in Chinese). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=jgjs201604020
|
| [11] |
ZHENG L M. Research on key technologies and equipment development of engine connecting rod fracture splitting[D]. Changchun: Jilin University, 2012: 25-40(in Chinese).
|
| [12] |
ZHANG Zh Q. Numerical analysis and experimental study on influencing factors of splitting process of engine connecting rod[D].Changchun: Jilin University, 2011: 89-105(in Chinese).
|
| [13] |
LIU P, LI W Zh, WEI Y Sh, et al. Development of fracture splitting connecting rod made of mid-carbonand microalloyed steel without quenching and tempering[J]. Journal of Iron and Steel Research, 2015, 27(1):46-50 (in Chinese). http://en.cnki.com.cn/Article_en/CJFDTotal-IRON201501011.htm
|
| [14] |
JIAO J, GUO J F, WANG L, et al. Research of the form and growth of crack of in hot affected zonefor drill by pulsed CO2 laser cutting[J]. Metallurgical Equipment, 2012, 6(3):17-21(in Chinese). http://en.cnki.com.cn/Article_en/CJFDTOTAL-YJSB201203005.htm
|
| [15] |
LI F. The experimental research of laser processing for typical material fracture splitting notch[D]. Changchun: Jilin University, 2007: 40-50(in Chinese).
|
| [16] |
WANG X H. Iron castings temperature field numerical analysis by laser cutting the stress-raising groove[D]. Changchun: Jilin University, 2010: 40-60(in Chinese).
|
| 1. |
钱心磊, 孔勇, 杜彤耀, 徐果, 许雪莹. 相位敏感光时域反射仪的振动全程敏感研究. 激光技术. 2019(05): 18-23 .
 本站查看
| |
| 2. |
和亮. 基于级联马赫-曾德尔调制器的太赫兹通信系统. 激光技术. 2016(06): 787-790 .
本站查看
|
DownLoad: