Effect of laser shock processing on fatigue life of fillet structures under different stress levels

JIANG Yinfang; JI Bin; ZHAO Yong; HUA Cheng; MENG Lilin; PENG Taotao

doi:10.7510/jgjs.issn.1001-3806.2018.03.015

LASER TECHNOLOGY > 2018 > 42(3): 369-373. > DOI: 10.7510/jgjs.issn.1001-3806.2018.03.015

JIANG Yinfang, JI Bin, ZHAO Yong, HUA Cheng, MENG Lilin, PENG Taotao. Effect of laser shock processing on fatigue life of fillet structures under different stress levels[J]. LASER TECHNOLOGY, 2018, 42(3): 369-373. DOI: 10.7510/jgjs.issn.1001-3806.2018.03.015

Citation:

PDF (6595 KB)

Effect of laser shock processing on fatigue life of fillet structures under different stress levels

1.
School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013, China
2.
Chengdu Aircraft Design and Research Institute, Aviation Industry Corporation of China, Chengdu 610091, China
3.
Chengdu Aircraft Industry(Group) Co. Ltd., Chengdu 610092, China

More Information

Received Date: July 18, 2017
Revised Date: September 19, 2017
Published Date: May 24, 2018

Graphical Abstract

Abstract

Abstract

In order to study effect of laser shock processing(LSP) on the fatigue life of fillet structures under different stress levels (the maximum stress during fatigue test), TC4-DT titanium alloy samples were subjected to laser shock processing, and then tensile stress test was carried out. The stress levels were 385MPa and 423MPa respectively, and the stress ratio r was 0.1. The fatigue fracture was analyzed by means of a scanning electron microscope (SEM). The results show that after laser shock processing, the fatigue crack initiation is moved from the fillet surface to the inside, the width of fatigue striation decreases, and the fatigue life of fillet structure is improved. With the increase of stress level, the gain of the fatigue life of the fillet treated by laser shock processing is reduced. When the stress level increases from 385MPa to 423MPa, the fatigue life gain of fillet structure decreases from 246.2% to 111.8%. After LSP, the surface of the fillet has a certain degree of compressive stress, and the fatigue life is improved. However, with the increase of the stress level, thefatigue life gain of the fillet structure is reduced.This result has guiding significance for the study on suppressing fatigue crack initiation by strengthening weak region.
- laser technique,
- fatigue life,
- fillet structure,
- stress level

FullText(HTML)

References (18)

References

[1]	LI Y H, HE W F, ZHOU L Ch. The strengthening mechanism of laser shock processing and its application on the aero-engine components[J]. Scientia Sinica Technologica, 2015, 45(1):1-8(in Chinese). http://cn.bing.com/academic/profile?id=69d9148d29a79b624dae1529c713a74f&encoded=0&v=paper_preview&mkt=zh-cn
[2]	HU J L, LOU J, SHENG H C, et al. The effects of laser shock peening on microstructure and properties of metals and alloys:areview[J]. Advanced Materials Research, 2011, 347/353:1596-1604. DOI: 10.4028/www.scientific.net/AMR.347-353
[3]	LI Zh. Investigation of residual stress and fatigue performance of titanium alloy part with hole by laser shock processing[D]. Zhenjiang: Jiangsu University, 2016: 11-18(in Chinese).
[4]	GOMEZ-ROSAS G, RUBIO-GONZALEZ C, OCANA J, et al. High level compressive residual stresses produced in aluminum alloys by laser shock processing[J]. Applied Surface Science, 2005, 252(4):883-887. DOI: 10.1016/j.apsusc.2005.01.150
[5]	MONTROSS C S, WEI T, YE L, et al. Laser shock processing and its effects on microstructure and properties of metal alloys:a review[J]. International Journal of Fatigue, 2002, 24(10):1021-1036. DOI: 10.1016/S0142-1123(02)00022-1
[6]	RANKIN J E, HILL M R, HACKEL L A.The effects of process variations on residual stress in laser peened 7049-T73 aluminum alloy[J]. Materials Science and Engineering, 2003, A349(1/2):279-291. http://www.sciencedirect.com/science/article/pii/S0921509302008110
[7]	CAO Z W, CHE Zh G, ZOU Sh K, et al. The effect of laser shock peening on fatigue property of 7050 aluminum alloy fastener hole[J]. Applied Laser, 2013, 33(3):259-262(in Chinese). DOI: 10.3788/AL
[8]	ZHANG M Y, ZHU Y, GUO W, et al. Effects of laser shock processing on fatigue properties of TC17 titanium alloy[J]. Laser Technology, 2017, 41(2):231-234(in Chinese). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=jgjs201702017
[9]	RUBIO-GONZÁLEZ C, OCAÑA J L, GOMEZ-ROSAS G, et al. Effect of laser shock processing on fatigue crack growth and fracture toughness of 6061-T6 aluminum alloy[J]. Materials Science & Engineering, 2004, A386(1/2):291-295. http://www.sciencedirect.com/science/article/pii/S0921509304009372
[10]	PEYRE P, FABBRO R, MERRIEN P, et al. Laser shock processing of aluminum alloys. Application to high cycle fatigue behavior[J]. Materials Science & Engineering, 1996, A210(1/2):102-113. http://www.sciencedirect.com/science/article/pii/0921509395100849
[11]	CLAUER A H, LAHRMAN D F. Laser shock processing as a surface enhancement process[J]. Key Engineering Materials, 2001, 197(1775):121-144. DOI: 10.4028-www.scientific.net-KEM.197.121/
[12]	JIANG Y F, LI J, PAN Y, et al. Investigation of effect of two-side laser shock order onsmall-hole specimen strengthening[J]. Laser Technology, 2016, 40(1):82-85(in Chinese). http://www.en.cnki.com.cn/Article_en/CJFDTOTAL-JGJS201601019.htm
[13]	WANG Zh P, GE M Zh. Impact of laser shock processing on fatigue strength of crankshaft[J]. Machinery Design & Manufacture, 2011(8):197-199(in Chinese). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=jxsjyzz201108076
[14]	LI Q P, LI Y H, HE W F, et al. LSP to improve vibration fatigue performance of deflation valve lever[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, 38(1):69-74(in Chinese). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK201200113424
[15]	SPANRAD S, TONG J. Characterization of foreign object damage (FOD) and early fatigue crack growth in laser shock peened Ti-6AL-4V aerofoil specimens[J]. Materials Science & Engineering, 2011, A528(4):2128-2136. http://www.sciencedirect.com/science/article/pii/S187770581000189X
[16]	YANG C, HODGSON P D, LIU Q, et al. Geometrical effects on residual stresses in 7050-T7451 aluminum alloy rods subject to laser shock peening[J]. Journal of Materials Processing Technology, 2008, 201(1):303-309. DOI: 10.1891-1521-0987.10.3.121/
[17]	NIE X, HE W, ZANG S, et al. Effect study and application to improve high cycle fatigue resistance of TC11 titanium alloy by laser shock peening with multiple impacts[J]. Surface & Coatings Technology, 2014, 253(9):68-75. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=00171a816983120727f0155b5920a965
[18]	HERSHKO E, MANDELKER N, GHEORGHIU G, et al. Assessment of fatigue striation counting accuracy using high resolution scanning electron microscope[J]. Engineering Failure Analysis, 2008, 15(1/2):20-27. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=6c41d6f9a4dc6c04012adfa1f2c6461f

Cited By

Cited by

Periodical cited type(1)

思黛蓉，王明军，刘永勤，眭晓林. 粗糙球体和锥体目标激光散射非相干分量比. 激光技术. 2021(01): 37-43 .

本站查看

Other cited types(0)

Get Citation

PDF

XML

Article views (4) PDF downloads (5) Cited by(1)

Turn off MathJax

Article Contents

Abstract

References

Effect of laser shock processing on fatigue life of fillet structures under different stress levels

Abstract

References

Cited by

Periodical cited type(1)

Other cited types(0)

Catalog

Links：

Effect of laser shock processing on fatigue life of fillet structures under different stress levels

Abstract

References

Cited by

Periodical cited type(1)

Other cited types(0)

Catalog

Links：

Export File

Citation

Format

Content