高级检索

一种低复杂度的激光打标拐点检测算法

梁文斌, 谢跃雷, 彭诚诚, 王太兴

梁文斌, 谢跃雷, 彭诚诚, 王太兴. 一种低复杂度的激光打标拐点检测算法[J]. 激光技术, 2015, 39(2): 202-205. DOI: 10.7510/jgjs.issn.1001-3806.2015.02.012
引用本文: 梁文斌, 谢跃雷, 彭诚诚, 王太兴. 一种低复杂度的激光打标拐点检测算法[J]. 激光技术, 2015, 39(2): 202-205. DOI: 10.7510/jgjs.issn.1001-3806.2015.02.012
LIANG Wenbin, XIE Yuelei, PENG Chengcheng, WANG Taixing. A simple corner detection algorithm for laser marking[J]. LASER TECHNOLOGY, 2015, 39(2): 202-205. DOI: 10.7510/jgjs.issn.1001-3806.2015.02.012
Citation: LIANG Wenbin, XIE Yuelei, PENG Chengcheng, WANG Taixing. A simple corner detection algorithm for laser marking[J]. LASER TECHNOLOGY, 2015, 39(2): 202-205. DOI: 10.7510/jgjs.issn.1001-3806.2015.02.012

一种低复杂度的激光打标拐点检测算法

基金项目: 

广西省自然科学基金资助项目(2013GXNSFFA019004)

详细信息
    作者简介:

    梁文斌(1990-),男,硕士研究生,现主要从事车地宽带无线通信技术实现的研究。

    通讯作者:

    谢跃雷。E-mail:ylxie_guet@126.com

  • 中图分类号: TG665

A simple corner detection algorithm for laser marking

  • 摘要: 为了改善激光打标系统中图像解算的拐点检测率,提高激光标刻质量,采用一种基于斜率差的拐点检测算法,进行了理论分析和实验验证。该算法计算出图像数据中相邻两点间偏移坐标的斜率,并以此相邻坐标点连线斜率之差作为判决条件检测提取拐点。结果表明,新算法较传统算法而言,在拐点检测更为准确的同时,具有较小的运算复杂度;应用该算法能够修正传统打标系统中存在的拐点工艺问题,使图像拐点在提取过程中能够更节省存储空间,减少了运算量。
    Abstract: In order to improve corner detection probability and obtain satisfactory marking quality in laser marking systems, a corner detection algorithm based on slope difference was proposed and theoretical analysis and experimental verification were carried out. After calculating the slopes of adjacent points, the corner points were picked up in terms of slopes difference. The simulation results show that the proposed algorithm can achieve accurate corner points with less computation complexity compared with the traditional algorithms. This algorithm can solve inflection point processing problems in the traditional marking systems, save storage space and reduce the computational complexity in the process of extracting image inflection points.
  • [1]

    KUANG Y, WU Y F, WU B, et al. Extraction and optimization of marking path in laser marking systems[J]. Laser Technology, 2012, 36(1): 131-134(in Chinese).

    [2]

    PENG L Y, WANG X Y, ZHOU J T, et al. Polynomial fitting correction of galvanometer geometric distortion error in laser marking[J]. Laser Technology, 2013, 37(5): 601-604(in Chinese).

    [3]

    ZHOU Y F, ZHAO H F, HUANG Z Q. Laser lithography system and its technological research[J]. Electronic Design Engineering, 2011, 19(2): 126-129(in Chinese).

    [4]

    DIACI J, BRAČUN D, GORIČ A, et al. Rapid and flexible laser marking and engraving of tilted and curved surfaces[J]. Optics and Lasers in Engineering, 2011, 49(2): 195-199.

    [5]

    TANG H B. Laser printer marking quality and marking quality assessment standard research[D]. Chengdu:University of Electronic Science and Technology of China,2012:1-12(in Chinese).

    [6]

    LUO P, WU Y F, YUE S, et al.Polygonal approximating algorithm of digital curves for bitmap laser marking[J].Laser Technology, 2011, 35(3): 372-375(in Chinese).

    [7]

    SUN C B,LI Y K,ZHANG Z H.The preliminary study of image segmentation based on douglas-peucker algorithm[J]. Geomatics & Spatial Information Technology, 2012,35(5):33-35(in Chinese).

    [8]

    SONG X M, CHENG C X, ZHOU C H. An analysis and investigation of algorithms for identifying convexity-concavity of a simple polygon[J]. Remote Sensing for Land & Resources, 2011(3):25-31(in Chinese).

    [9]

    SONG X, CHENG C, ZHOU C, et al. Gestalt-based douglas-peucker algorithm to keep shape similarity and area consistency of polygons[J]. Sensor Letters, 2013, 11(6/7): 6-7.

    [10]

    MA J, XU S, PU Y, et al. A real-time parallel implementation of Douglas-Peucker polyline simplification algorithm on shared memory multi-core processor computers[C]//Computer Application and System Modeling (ICCASM), 2010 International Conference.New York,USA:IEEE, 2010:647-652.

    [11]

    LI S, FANG Y M, XI W F.Rapid compression algorithm based on the No topological vector curve[J]. Science Technology and Engineering, 2011,11(18): 4324-4327(in Chinese).

    [12]

    WANG H X, ZHU X G.Based on the slope change indirect algorithms to extract contour feature points[J].Software Guide,2010,9(11):66-67(in Chinese).

计量
  • 文章访问数:  4
  • HTML全文浏览量:  0
  • PDF下载量:  8
  • 被引次数: 0
出版历程
  • 收稿日期:  2014-03-30
  • 修回日期:  2014-05-03
  • 发布日期:  2015-03-24

目录

    /

    返回文章
    返回