增益导引折射率反导引大模场光纤激光器特性分析

余晓秋; 李明中; 王建军; 耿远超; 许党朋; 林宏奂; 张锐; 黄小东

doi:10.3969/j.issn.1001-3806.2011.01.008

高级检索

ISSN 1001-3806CN 51-1125/TN 网站地图

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

增益导引折射率反导引大模场光纤激光器特性分析

余晓秋 , 李明中 , 王建军 , 耿远超 , 许党朋 , 林宏奂 , 张锐 , 黄小东

文章导航 > 激光技术 > 2011 > 35(1): 25-28,78

引用本文:

Citation:

增益导引折射率反导引大模场光纤激光器特性分析

1.
中国工程物理研究院激光聚变研究中心, 绵阳 621900;
2.
中国工程物理研究院研究生部, 绵阳 621900

作者简介: 余晓秋(1985-)，男，硕士研究生，主要从事增益导引折射率反导引光纤技术研究.

通讯作者: 李明中, limingzhong@sina.com ;

中图分类号: TN248.1

Characteristic analysis of gain guided index antiguided large-mode-area fiber lasers

1.
Research Center of Laser Fusion, China Academy of Engineering Physics, Mianyang 621900, China;
2.
Graduate School, China Academy of Engineering Physics, Mianyang 621900, China

Corresponding author: LI Ming-zhong, limingzhong@sina.com ;

CLC number: TN248.1

摘要: 为了研究增益导引折射率反导引光纤激光器的功率分布及输出特性,根据此类光纤的结构原理和特点,建立了端面抽运的增益导引折射率反导引光纤激光器的基模光速率方程,推导了避免激发高阶模的增益阈值判决条件,并运用弦切法和Runge-Kutta法数值求解了该速率方程,分析了光纤长度、腔镜反射率等参量对基模输出功率的影响。采用芯径为100m、折射率差为-0.00094、掺杂Yb3+浓度为51026/m3的增益导引折射率反导引光纤构建激光器时,要使得整段光纤不激发高阶模,需使光纤长为3cm、两腔镜反射率为0.98和0.3,当抽运功率为30W时,可获得2.42W的大模场单模输出,斜率效率约为8.1%。结果表明,优化设计腔镜反射率和光纤长度后,采用较短的大模场高掺杂增益导引折射率反导引光纤可获得一定效率的基模输出。
- 激光技术 /
- 增益导引折射率反导引光纤 /
- 速率方程 /
- 数值分析
Abstract: In order to study the power distribution and output characteristics of gain guided index antiguided (GG-IAG) fiber lasers, rate equations of basic model light of double-clad GG-IAG fiber lasers with end-pumping were established, based on the principle and structure characteristics of GG-IAG fibers. After solving the rate equations with tangential method and Runge-Kutta method, power distribution and output characteristics of basic model light were gained. The results show that parameters of fiber and laser cavity, such as fiber length, output lens reflectivity, have significant influence on gain distribution and output power of basic model light. When using a GG-IAG fiber with a radius of 100m, index step -0.00094 and concentration of ions 51026/m3 to construct a GG-IAG fiber laser, fiber length needs to be 3cm and output lens reflectivity is 0.98 and 0.3 respectively, in order to restrain LP11 model, and while inputing a 30W pump-light, 2.42W single-mode laser with large-mode-area can be obtained. The analysis shows that by optimally designing cavity mirror reflectivity and fiber length, fundamental mode output with certain efficiency can be obtained in a short length large-mode-area highly doped GG-IAG fiber.
- laser technique /
- gain guided index antiguided fiber /
- rate equations /
- numerical analysis

[1]	SUDESH V,McCOMB T,CHEN Y,et al.Diode-pumped 200m diameter core gain-guided,index-antiguided single mode fiber laser[J].Applied Physics,2008,B90(3):369-372.
[2]	SIEGMAN A E.Propagating modes in gain-guided optical fibers[J].Journal of the Optical Society of America,2003,A20(8):1617-1628.
[3]	SIEGMAN A E,CHEN Y,SUDESH V,et al.Confined propagation and near single-mode laser oscillation in a gain-guided,index antiguided optical fiber[J].Applied Physics Letters,2006,89(25):251101/1-251101/3.
[4]	CHEN Y,SUDESH V,McCOMB T,et al.Lasing in a gain-guided index antiguided fiber[J].Journal of the Optical Society of America,2007,B24(8):1683-1688.
[5]	CHEN Y,McCOMB T,SUDESH V,et al.Very large-core,single-mode,gain-guided,index-antiguided fiber lasers[J].Optics Letters,2007,32(17):2505-2508.
[6]	WANG W N,TAN X L,TIAN Zh,et al.Research on laser characteristics of gain-guided and index-antiguided fibers[J].Laser Technology,2009,33(5):503-505 (in Chinese).
[7]	WANG F R.Yb3+-doped double-clad fiber laser theory and experiment research[D].Mianyang:China Academy of Engineering Physics,2005:20-21 (in Chinese).
[8]	WANG X R,XIONG C D,QIU Q,et al.Analysis of Ytterbium-doped gain guided and index antiguided fiber amplifier[J].Proceedings of SPIE,2009,7278:72780C/1-72780C/6.
[9]	SIEGMAN A E.Gain-guided,index-antiguided fiber lasers[J].Journal of the Optical Society of America,2007,B24(8):1677-1682.

[1]	梅林 , 王英 , 王振佳 , 彭伟鸿 . 掺Yb3+双包层光纤激光器的暂态数值分析. 激光技术, 2006, 30(3): 225-227,231.
[2]	欧攀 , 张春熹 , 闫平 , 巩马理 . 多点抽运的双包层光纤激光器数值分析研究. 激光技术, 2007, 31(2): 150-152,178.
[3]	刘国华 , 刘德明 . 高功率光纤激光器喇曼效应的数值分析. 激光技术, 2007, 31(3): 298-300,321.
[4]	郭嘉伟 , 李彤 , 牛瑞华 , 薛亮平 , 李燕凌 , 王宏元 . Cr,Tm,Ho:YAG激光器温度特性的数值分析. 激光技术, 2011, 35(6): 761-764. doi: 10.3969/j.issn.1001-3806.2011.06.010
[5]	卢静 , 罗斌 , 潘炜 , 罗广军 , 李建平 , 蔺玉珂 . 影响VCSOAs增益饱和特性因素分析. 激光技术, 2007, 31(5): 496-499,502.
[6]	赵同刚 , 任建华 , 赵荣华 , 饶岚 , 王丽丽 , 林金桐 , 吴炜 , 郭永新 . 半导体激光器实现波长转换的理论和实验分析. 激光技术, 2005, 29(2): 216-218.
[7]	邵怀宗 , 吕百达 , 翟群 . 二极管端泵浦连续激光器激活介质长度与透过率的优化. 激光技术, 1998, 22(4): 203-206.
[8]	王匀 , 范苏湘 , 甘斐 , 王荣茂 , 徐国峰 , 殷苏民 . 3003铝合金激光冲击微挤压成形研究. 激光技术, 2013, 37(6): 820-824. doi: 10.7510/jgjs.issn.1001-3806.2013.06.026
[9]	刘瑞科 , 王超臣 , 牛昌东 , 金舵 , 白振旭 , 王雨雷 , 吕志伟 . 键合Nd∶YAG/Cr⁴⁺∶YAG被动调Q微片激光器的优化设计. 激光技术, 2021, 45(2): 218-223. doi: 10.7510/jgjs.issn.1001-3806.2021.02.016
[10]	李丰 , 潘炜 , 罗斌 , 陶原 , 江宁 , 邵宇挺 . 信道串扰对多信道混沌通信系统的影响. 激光技术, 2008, 32(4): 445-448.
[11]	刘笑兰 , 刘三秋 , 杨小松 . 激光等离子体临界面处的强朗缪尔湍动. 激光技术, 2007, 31(2): 213-216.
[12]	尹丰 , 陶向阳 . 相对论电子在高斯激光场中的加速. 激光技术, 2011, 35(3): 384-387. doi: 10.3969/j.issn.1001-3806.2011.03.025
[13]	卢静 , 罗斌 , 周刚 , 赵淑平 . 垂直腔半导体光放大器调谐输出特性分析. 激光技术, 2011, 35(2): 260-263. doi: 10.3969/j.issn.1001-3806.2011.02.032
[14]	陆洋 , 陈建国 , 李大义 . (双稳外腔)LD分析中扰动近似的有效性研究. 激光技术, 2002, 26(1): 26-28.
[15]	尚艳丽 , 陈海滨 , 洪治 . 飞秒激光直写铒镱玻璃波导激光器的优化设计. 激光技术, 2009, 33(3): 279-282.
[16]	邓国庆 , 朱志强 , 余吟山 . C→A跃迁准分子激光阈值条件的研究. 激光技术, 2005, 29(5): 466-469.
[17]	邓诚先 , 李正佳 , 朱长虹 . 被动调Q腔内单共振光参变振荡器和Cr4+：YAG激光器. 激光技术, 2005, 29(6): 589-593.
[18]	李安英 , 杨亚培 . 光波导光束传输法数值分析新进展. 激光技术, 2000, 24(4): 236-240.
[19]	王伟能 , 谭晓玲 , 田振 , 耿优福 , 王鹏 , 姚建铨 . 增益导引折射率反导引光纤激光特性的研究. 激光技术, 2009, 33(5): 503-505. doi: 10.3969/j.issn.1001-3806.2009.05.012
[20]	杨齐民 . 染料调Q激光速率方程的数值解. 激光技术, 1991, 15(1): 25-32.

点击查看大图

计量

文章访问数: 4979
HTML全文浏览量: 821
PDF下载量: 482
被引次数: 0

增益导引折射率反导引大模场光纤激光器特性分析

通讯作者: 李明中, limingzhong@sina.com;

作者简介: 余晓秋(1985-)，男，硕士研究生，主要从事增益导引折射率反导引光纤技术研究

1. 中国工程物理研究院激光聚变研究中心, 绵阳 621900;
2. 中国工程物理研究院研究生部, 绵阳 621900

收稿日期: 2010-03-16
录用日期: 2010-06-08
网络出版日期: 2011-01-25

关键词:

摘要: 为了研究增益导引折射率反导引光纤激光器的功率分布及输出特性,根据此类光纤的结构原理和特点,建立了端面抽运的增益导引折射率反导引光纤激光器的基模光速率方程,推导了避免激发高阶模的增益阈值判决条件,并运用弦切法和Runge-Kutta法数值求解了该速率方程,分析了光纤长度、腔镜反射率等参量对基模输出功率的影响。采用芯径为100m、折射率差为-0.00094、掺杂Yb3+浓度为51026/m3的增益导引折射率反导引光纤构建激光器时,要使得整段光纤不激发高阶模,需使光纤长为3cm、两腔镜反射率为0.98和0.3,当抽运功率为30W时,可获得2.42W的大模场单模输出,斜率效率约为8.1%。结果表明,优化设计腔镜反射率和光纤长度后,采用较短的大模场高掺杂增益导引折射率反导引光纤可获得一定效率的基模输出。

English Abstract

Characteristic analysis of gain guided index antiguided large-mode-area fiber lasers

Corresponding author: LI Ming-zhong, limingzhong@sina.com

1. Research Center of Laser Fusion, China Academy of Engineering Physics, Mianyang 621900, China;
2. Graduate School, China Academy of Engineering Physics, Mianyang 621900, China

Received Date: 2010-03-16
Accepted Date: 2010-06-08
Available Online: 2011-01-25

Abstract: In order to study the power distribution and output characteristics of gain guided index antiguided (GG-IAG) fiber lasers, rate equations of basic model light of double-clad GG-IAG fiber lasers with end-pumping were established, based on the principle and structure characteristics of GG-IAG fibers. After solving the rate equations with tangential method and Runge-Kutta method, power distribution and output characteristics of basic model light were gained. The results show that parameters of fiber and laser cavity, such as fiber length, output lens reflectivity, have significant influence on gain distribution and output power of basic model light. When using a GG-IAG fiber with a radius of 100m, index step -0.00094 and concentration of ions 51026/m3 to construct a GG-IAG fiber laser, fiber length needs to be 3cm and output lens reflectivity is 0.98 and 0.3 respectively, in order to restrain LP11 model, and while inputing a 30W pump-light, 2.42W single-mode laser with large-mode-area can be obtained. The analysis shows that by optimally designing cavity mirror reflectivity and fiber length, fundamental mode output with certain efficiency can be obtained in a short length large-mode-area highly doped GG-IAG fiber.