Fabricating and testing of three dimensional model with photohardening polymer
-
摘要: 本文介绍了一种光固化法快速造型技术,阐述了光敏树脂的理化性能和曝光特点,在精密圆分度台上,通过旋转平面对零件各参数进行了测定,得出了一系列平面高度变化和径向变化数据,并对之分析讨论。Abstract: This paper described the fabrication method of the plastic model by using the fast liquid photohardening polymer. The physical,chemical,and photo-sensitive performance of the photopolymerare presented in this paper. When a model was rotating on a circular index table,the parameters of thecircular flat surface were tested and controlled with a computer system. The roudness and the variationcurves of the flat surface were tested.
-
Keywords:
- tereolithography /
- photopolymer /
- testing
-
-
[1] 永森茂.光アうイアンス,1994;(5):19～23 [1] 山田真次郎.光アうイアンス,1994;(5):29～30 [2] 董向群.国际学术动态.1994;(4):59～61 [3] 楼永坚,董向群.应用激光.1994;14(4):174～176 [4] 范华良,董向群.光子学报.1994;23(2):168～173 [5] 董向群主编.光学刻划技术论文精选.北京:机械工业出版社,1991:129～138 -
期刊类型引用(3)
1. 赵慧凯. 基于激光冲击的航空发动机风扇性能优化设计. 激光杂志. 2020(03): 134-138 . 
百度学术
2. 樊国根, 蒙芳. 多传感器阵列的近场源联合参量估计优化. 国外电子测量技术. 2019(06): 145-149 . 百度学术
3. 肖博乐. 复杂电子信息与载体的可分离性判定方法研究. 赤峰学院学报(自然科学版). 2019(07): 82-85 . 百度学术
其他类型引用(2)
计量
- 文章访问数: 0
- HTML全文浏览量: 0
- PDF下载量: 25
- 被引次数: 5
下载: