Technology of laser nano-material surface engineering

HU Zengrong; TONG Guoquan; CHEN Changjun; GUO Huafeng; ZHOU Liang; XU Jiale

doi:10.7510/jgjs.issn.1001-3806.2014.06.009

The laser nano-material surface engineering (LNMSE) technology is established by combining surface engineering technology, nano technology and laser technology. All the important laser surface treatment methods of LNMSE were introduced. The summarization, analysis and research of the existing literature prove that laser surface treatment methods can get the nano-crystallization surface and get the cladding surface with nano-particles.

Technology of laser nano-material surface engineering

Corresponding author: TONG Guoquan, meegqtong@nuaa.edu.cn;

1. College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;

2. School of Urban Rail Transportation, Soochow University, Suzhou 215131, China;

3. School of Mechanical and Electrical Engineering, Soochow University, Suzhou 215131, China;

4. School of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, China

Received Date: 2013-12-19

Accepted Date: 2014-02-17

Available Online: 2014-11-25

Abstract: The laser nano-material surface engineering (LNMSE) technology is established by combining surface engineering technology, nano technology and laser technology. All the important laser surface treatment methods of LNMSE were introduced. The summarization, analysis and research of the existing literature prove that laser surface treatment methods can get the nano-crystallization surface and get the cladding surface with nano-particles.

HTML

Reference (20)

[1]	LU K,LU J. Surface nanocrystallization of metallic materials presentation of the concept behind a new approach [J]. Journal of Material Science Technology, 1999,15(3):193-197.
[2]	XU B Sh, OU W Zh, MA Sh N, et al. Nano-materials surface engineering[J]. China Mechanical Engineering, 2000,11(6):707-712(in Chinese).
[3]	XU B Sh, LIU Sh C, LIANG X B. Progress and prospect of nano-materials surface engineering[J].Chinese Jornal of Mechanical Engineering,2003,10(10):21-26(in Chinese).
[4]	LIU G,YONG X P,LU K. The current situation of researches of surface-nanocrystallization on metallic materials[J].China Surface Engineering,2001,52(3):1-5(in Chinese).
[5]	LU K, LU J. Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment[J]. Material Science and Engineering,2004,A38(7):375-377.
[6]	LIU G, ZHOU L. Surface nanocrystallization technique of the engineering metallic material[J].Nanoscience Technology, 2006,3 (1): 51-56(in Chinese).
[7]	WEN H Y. Study of the laser surface treatment of Inconel718 alloy. Qinhuangdao:Yanshan University,2010:39-40(in Chinese).
[8]	KANNATEY-ASIBU E.Principles of laser materials processing [M].Hoboken, NJ,USA: Wiley,2009:594-595.
[9]	WANG Ch T, ZHOU H, LIN P Y, et al. Fabrication of nano-sized grains by pulsed laser surface melting[J]. Journal of Physics,2010,D43(9):095402.
[10]	ZHANG P, ZHOU H, WANG Ch T, et al. Wear properties of H13 with micron scale and nano scale grains bionic units processed by laser remelting [J].Optics Laser Technology,2013,54:219-224.
[11]	CHEN S Y,DONG J, CHEN J, et al. Nano-particles reinforced Co-based gradient coating with high wear-resistance prepared in-situ by laser on surface of crystallizer copper alloy[J].Chinese Journal of Lasers,2011,38(7):0703006(in Chinese).
[12]	NIU X, CHAO M J, WANG W L, et al. In situ synthesized NbC particulate reinforced Ni- based composite coatings by laser cladding[J].Chinese Journal of Lasers,2006,33(7):987-992(in Chinese).
[13]	XU J, LI Z Y, ZHU W H, et al.Investigation on microstructural characterization of in situ TiB/Al metal matrix composite by laser cladding [J]. Materials Science and Engineering,2007,A447(1/2):307-313.
[14]	LI J NG,GONG Sh L, LIU HAO, et al. Physical properties and microstructures of Fe3Al matrix laser amorphous-nanocrystals reinforced coating[J].Materials Letters,2013,92:235-238.
[15]	ZHANG G J,DAI J Q,WANG H P, et al. Research on laser cladded nickel based nanometer tungsten carbide composite coatings[J]. Transactions of Materials and Heat Treatment, 2004, 25(5) : 1004-1008.
[16]	WANG H P, ZHANG G J, DAI J Q, et al. The structure of wcnano/Ni composite coating by laser cladding[J].Applied Laser,2005,25(6):369- 394.
[17]	MONTROSS C S, WEI T, YE L, et al. Laser shock processing and its effects on microstructure and properties of metal alloys: a review [J]. International Journal of Fatigue,2002,24(10):1021-1036.
[18]	NIE X F, HE W F, LI Q P, et al. Improvement of structure and mechanical properties of TC6 titanium alloy with laser shock peening[J].High Power Laser and Partical Beams,2013,25(5):1115-1119(in Chinese).
[19]	LU J Z. Investigation of laser shock processing on the mechanical properties and micro-plastic deformation mechanism of LY2 aluminum alloy.Zhenjiang: Jiangsu University, 2010:64-72(in Chinese).
[20]	XIONG Ch, LI Zh F, WANG X D. Thermal stability of microstructure of laser shock processed TC11 titanium alloy[J].Jouranl of Plasticity Engineering,2013,20(3):116-120(in Chinese).

Technology of laser nano-material surface engineering

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Proportional views