[1] 李恩德, 杨泽平, 官春林, 等. 我国惯性约束聚变领域中的波前控制技术[J]. 光电工程, 2020, 47(10): 42-52.LI E D, YANG Z P, GUAN Ch L, et al. Wavefront control technology in the field of inertial confinement fusion in China[J]. Opto-Electronic Engineering, 2020, 47(10): 42-52(in Chinese).
[2] 王峰, 理玉龙, 关赞洋, 等. 压缩感知技术在激光惯性约束聚变研究中的应用[J]. 强激光与粒子束, 2022, 34(3): 127-135.WANG F, LI Y L, GUAN Z Y, et al. Application of compression sensing technology in laser inertial confinement fusion research[J]. High Power Laser and Particle Beam, 2022, 34(3): 127-135(in Chinese).
[3] YALUKOVA O, SÁRADY I. Investigation of interaction mechanisms in laser drilling of thermoplastic and thermoset polymers using diffe-rent wavelengths[J]. Composites Science and Technology, 2006, 66(10): 1289-1296. doi: 10.1016/j.compscitech.2005.11.002
[4] TOKAREV V N. Mechanism of laser drilling superhigh-aspect-ratio holes in polymers[J]. Quantum Eletronics, 2006, 36(7): 624-637. doi: 10.1070/QE2006v036n07ABEH013181
[5] HOU C J, YANG L J, WANG Y, et al. Research on laser micro machining polystyrene material[J]. Advanced Materials Research, 2012, 628: 83-89. doi: 10.4028/www.scientific.net/AMR.628.83
[6] 闫晓光, 陈涛. 193nm和248nm波长准分子激光对玻璃及聚合物刻蚀特性的比较[J]. 电加工与模具, 2016(4): 30-34.YAN X G, CHEN T. Comparison of 193 nm and 248 nm wavelength excimer lasers on glass and polymer etching properties[J]. Electromechining & Mould, 2016(4): 30-34(in Chinese).
[7] 王军, 周亮, 付海涛, 等. 聚苯乙烯紫外激光打孔实验研究[J]. 电加工与模具, 2019(4): 54-57.WANG J, ZHOU L, FU H T, et al. Polystyrene ultraviolet laser punching test study[J]. Electromechining & Mould, 2019(4): 54-57(in Chinese).
[8] 顾江, 叶霞, 范振敏, 等. 激光刻蚀法制备仿生超疏水表面的研究进展[J]. 激光技术, 2019, 43(4): 57-63.GU J, YE X, FAN Zh M, et al. Research progress on the preparation of biomimetic superhydrophobic surfaces by laser etching[J]. Laser Technology, 2019, 43(4): 57-63(in Chinese).
[9] 齐立涛, 刘文海. 266 nm紫外固体激光在碳化硅晶片上的微结构加工[J]. 黑龙江科技大学学报, 2017, 27(2): 176-180.QI L T, LIU W H. Microstructure processing of 266nm UV solid-state laser on silicon carbide wafers[J]. Journal of Heilongjiang University of Science and Technology, 2017, 27(2): 176-180(in Chinese).
[10] 齐立涛, 刘凤聪, 张耀东. 266nm紫外固体激光切割碳纤维复合材料的实验研究[J]. 激光技术, 2022, 46(3): 402-407.QI L T, LIU F C, ZHANG Y D. Experimental investigation on 266nm ultraviolet solid-state laser cutting of carbon fiber reinforced plastics[J]. Laser Technology, 2022, 46(3): 402-407.
[11] 齐立涛, 刘凤聪. 266nm纳秒固体激光在CH薄膜上打孔的工艺实验研究[J]. 激光技术, 2022, 46(6): 767-772.QI L T, LIU F C. Experimental investigation on 266 nm nanosecond solid-state laser drilling on CH film[J]. Laser Technology, 2022, 46(6): 767-772.
[12] RYTLEWSKI P, ZENKIEWICZ M. Laser-induced surface modification of polystyrene[J]. Applied Surface Science, 2009, 256(3): 857-861.
[13] 刘思颖, 陈明安, 程楠. 2519铅合金表面聚苯乙烯薄膜的制备和耐腐蚀性能[J]. 热加工工艺, 2014, 43(6): 99-102.LIU S Y, CHEN M A, CHENG N. Preparation and corrosion resistance of polystyrene film on the surface of 2519 lead alloy[J]. Hot Working Technology, 2014, 43(6): 99-102(in Chinese).
[14] 吴梦楠, 宋成伟, 黄燕华. 飞秒激光加工聚苯乙烯中的缺陷形成原因[J]. 激光与红外, 2017, 47(9): 1089-1095.WU M N, SONG Ch W, HUANG Y H. Causes of defect formation in femtosecond laser processing polystyrene[J]. Laser & Infrared, 2017, 47(9): 1089-1095(in Chinese).
[15] WANG B, WANG X C, ZHENG H Y, et al. Thermal effect of femtosecond laser polystyrene processing[J]. Optics & Laser Technology, 2019, 117: 244-250.
[16] YONG J, CHEN F, YANG Q, et al. Rapid fabrication of large-area concave micro lens arrays on PDMS by a femtosecond laser[J]. ACS Applied Materials & Interfaces, 2013, 5(19): 9382-9385.
[17] LI X, GUAN Y. Theoretical fundamentals of short pulse laser-metal interaction: A review[J]. Nanotechnology and Precision Engineering, 2020, 3(3): 105-125.
[18] 李南雷, 金星, 王广宇, 等. 真空下激光烧蚀聚合物产生推力过程的数值研究[J]. 装备指挥技术学院学报, 2010, 21(6): 124-127.LI N L, JIN X, WANG G Y, et al. Numerical study of the process by which laser ablation polymers generate thrust under vacuum[J]. Journal of the College of Equipment Command Technology, 2010, 21(6): 124-127(in Chinese).