[1] MATSUMARU A,TAKATA A,ISHIZAKI K.Advanced thin dicing blade for sapphire substrate[J].Science and Technology of Advanced Materials,2005,6(2):120.
[2] RAO R,BRADBY J E,WILILAMS J S.Patterning of silicon by indentation and chemical etching[J].Applied Physics Letters,2007,91 (12):123113/1-123113/3.
[3] SHIUANN L K.Laser as a future direction for wafer dicing:parametric study and quality assessment[C]//31st International Conference on Electronics Manufacturing and Technology.Kuala Lumpur,Malaysia:IEEE,2006:506-509.
[4] XIE X Zh,HUANG F M,WEIX,et al.Experimental study of laser dicing sapphire substrale by green DPSS laser[J].Proceedings of SPIE,2010,7844:78440T/1-78440T/7.
[5] KIM D,KIM Y,SEONG K,et al.Evaluation for UV laser dicing process and its reliability for various designs of stack chip scale package[C]//59th Electronic Components and Technology Conference.San Diego,USA:IEEE,2009:1531-1536.
[6] TOFTNESS R F,BOYLE A,GILLEN D.Laser technology for wafer dicing and microvia drilling for next generation wafers(invited paper)[J].Proceedings of SPIE,2005,5713:54-66.
[7] LIZOTTE T.Laser dicing of chip scale and silicon wafer scale packages[C]//28th International Electronics Manufacturing Technology Symposium.San Jose,USA:IEEE/CPMT/SEMI(R),2003:1-5.
[8] ILLY E K,KNOWLES M,GU E,et al.Impact of laser scribing for efficient device separation of LED components[J].Applied Surface Science,2005,249(1/4):354-361.
[9] LI M W,KEVIN H.Study of silicon micromachining using diodepumped solid-state lasers[J].Processings of SPIE,2004,5339:64-72.
[10] YOKOTAM A,MATSUO N,KAWAHARA K,et al.Development of dicing technique for thin semiconductor substrates with femtosecond laser ablation[J].Proceedings of SPIE,2002,4637:180-187.
[11] RICE G,JONES D,KIM K S,et al.Micromachining of gallium nitride,sapphire,and silicon carbide with ultrashort pulses[J].Proceeding of SPIE,2003,5147:299-307.
[12] CRAWFORD T H R,BOROWIEC A,HAUGEN H K.Femtosecond laser micromachining of grooves in silicon with 800nm pulses[J].Applied Physics,2005,A80(8):1717-1724.
[13] STOIAN R,ASHKENASI D,ROSENFELD A,et al.Laser ablation of sapphire with ultrashort pulses[J].Proceedings of SPIE,2000,3885:121-131.
[14] SUDANI N,VENKATAKRISHNAN K,TAN B.Laser singulation of thin wafer:die strength and surface roughness analysis of 80μm silicon dice[J].Optics and Lasers in Engineering,2009,47 (7/8):850-854.
[15] GU E,JEON C W,CHOI H W,et al.Micromachining and dicing of sapphire,gallium nitride and micro LED devices with UV copper vapour laser[J].Thin Solid Films,2004,453(1):462-466.
[16] YOSHINO F,SHAH L,FERMANN M,et al.Micromachining with a high repetition rate femtosecond fiber laser[J].Journal of Laser Micro/Nanoengineering,2008,3(3):157-162.
[17] SHAH L,FERMANN M E.High power femtosecond fiber chirped pulse amplification system for high speed micromachining[J].Journal of Laser Micro/Nanoengineering,2006,1 (3):176-180.
[18] OHMURA E,FUKUYO F,FUKUMISTU K,et al.Internal modified-layer formation mechanism into silicon with nanosecond laser[J].Journal of Achievements in Materials and Manufacturing Engineering,2006,17 (1/2):381-384.
[19] OHMURA E,KUMAGAI M,NAKANO M,et al.Analysis of processing mechanism in stealth dicing of ultra thin silicon wafer[J].Journal of Advanced Mechanical Design Systems and Manufacturing,2008,2(4):540-549.
[20] DELPHINE P,AKOS S,FRANK W,et al.Particle-free semiconductor cutting using the water jet guided laser[J].Proceedings of SPIE,2005,5713:240-246.
[21] PERROTTET D,HOUSH R,RICHERZHAGEN B,et al.Heat damage-free laser-microjet cutting achieves highest die fracture strength[J].Proceedings of SPIE,2005,5713:285-292.
[22] TAN B,VENKATAKRISHNAN K.Dual-focus laser micro-machining[J].Journal of Modem Optics,2005,52 (17):2603-2611.
[23] VENKATAKRISHNAN K,TAN B.Thin silicon wafer dicing with a dual-focused laser beam[J].Journal of Micromechanics and Microengineering,2007,17(12):2505-2515.
[24] MIGLIORE L.Enhancing silicon cutting performance by shaping the focused beam[J].Proceedings of SPIE,2007,6458:64580W/1-64580W/9.
[25] MIGLIORE L,LEE K S,JEONG-MOOG K,et al.Advances in laser singulation of silicon[C]// Conference Proceeding of ICALEO.San Jose,USA:Laser Institute of America,2006:237-242.
[26] OSTENDORF A,KULIK C,BAUER T,et al.Ablation of metals and semiconductors with ultrashort pulsed lasers:improving surface qualities of microcuts and grooves[J].Proceedings of SPIE,2004,5340:153 163.
[27] KLOTZBACH U,MAELZER S,KUNTZE T,et al.Influence of gas on cutting silicon with solid state laser[J].Proceedings of SPIE,2004,5339:488-493.
[28] DAMINELLI G,KRUGER J,KAUTEK W.Femtosecond laser interaction with silicon under water confinement[J]. Thin Solid Films,2004,467 (1/2):334 341.
[29] JANG D,KIM D.Liquid-assisted excimer laser micromaehing for ablation enhancement and debris reduction[J].Journal of Laser Micro/Nanoengineering,2006,1(3):221-225.
[30] ZHU S,LU Y F,HONG M H.Laser ablation of solid substrates in a water-confined environment[J].Applied Physics Letters,2001,79(9):1396-1398.