| [1] | SRIVASTAVA D,CHANG I T H,LORETTO M H.The optimization of processing parameters and characterization of microstructure of direct laser fabricated TiAl alloy components[J].Materials and Design,2000,21:425～433. |
| [2] | LEWIS G K,SCHILENGER E.Practical considerations and capabilities for laser assisted direct metal deposition[J].Material and Design,2000,21:417～423. |
| [3] | MILEWSKI J O,DICKERSON P G,NEMEC R B.Application of a manufacturing model for the optimization of additive processing of Inconel alloy 690[J].Journal of Materials Processing Technology,1999,91:18～28. |
| [4] | KOBRYN P A,MOORE E H,SEMIATIN S L.The effect of laser power and traverse speed on microstructure,porosity and build height in laser-deposited Ti-6Al-4V[J].Scripta Materialia,2000,43:299～305. |
| [5] | JI S,LI P,ZENG X.Microstructure and mechanical property analyses of the metal parts direct fabricated by laser cladding[J].Laser Technology,2006,30(2):130～132(in Chinese). |
| [6] | ZHANG Y,XI M,SHI L et al.Microstructure and properties of 316L stainless steel fabricated by laser direct forming[J].Rare Metal Materials and Engineering,2002,31(2):103～105(in Chinese). |
| [7] | ZHONG M,YANG L,LIU W et al.Laser direct manufacturing W/Ni telescope collimation component[J].Chinese Journal of Lasers,2004,31(4):482～487(in Chinese). |
| [8] | TAN H,CHEN J,YANG H et al.Real-time sensing and closed-loop control of laser rapid forming process.[J].Applied Laser,2005,25 (2):73～76(in Chinese). |
| [9] | LI P.Direct laser fabrication of 3-dimentional metal parts based on laser cladding[D].Wuhan:Huazhong University of Science & Technology,2005.33～95 (in Chinese). |
| [10] | YANG T,HU Q,ZENG X et al.Study on the algorithm of sectional contour lines building for laser direct metal forming[J].Electromachining & Mould,2003(6):32～35 (in Chinese). |
| [11] | The Compiling Group for the Book.Methods of orthogonal experimental design[M].Shanghai:Shanghai Scientific and Technical Publishers,1979.52 (in Chinese). |