[1] LIU B Ch, HUANG T Y. China materials engineering [M]. Beijing: Chemical Industry Press, 2005: 204(in Chinese).
[2] CHEN Sh M. Research on high temperature properties of Al2O3/20Cr25Ni20 composite material or roll [D]. Kunming: Kunming University of Science and Technology, 2013: 5-10(in Chinese).
[3] WANG E Z, XU Y P, BAO Ch G, et al. Preparation of Al2O3 particles/heat-resistant steel composite material and high-temperature abrasive wear properties[J]. Journal of Composite Materials, 2004, 21(1): 56-60(in Chinese).
[4] HAO Y B, WANG J, YANG P, et al. Research on microstructure and properties of laser cladding tin-based babbitt alloy [J]. Chinese Journal of Lasers, 2020, 47(8): 0802009 (in Chinese). doi: 10.3788/CJL202047.0802009
[5] CHEN Zh J, DING Y M, DONG G, et al. Analysis of microstructure and Cr content of low Cr alloy modified layer prepared by laser cladding on 9%Cr steel [J]. Surface Technology, 2020, 49(2): 281-287(in Chinese).
[6] DONG Sh Y, MA Y Zh, XU B Sh, et al. Research status of laser cladding materials [J]. Material Guide, 2006, 20(6): 10-14(in Chin-ese).
[7] SONG X H, ZOU Y F, XING J K, et al. Performance comparison of 35CrMo laser cladding iron-based alloy and nickel-based alloy coating [J]. Laser Technology, 2015, 39(1): 39-45(in Chinese).
[8] LU H F, PAN Ch Y, QIN E W, et al. Microstructure and properties of laser cladding WC/Ni-based alloy composite coating on 45 steel [J]. Metal Heat Treatment, 2019, 44(12): 19-25(in Chinese).
[9] LIU P L, SUN W L, WANG G D, et al. The effect of scanning rate on the performance of laser cladding nickel-based alloy coating [J]. Laser Technology, 2018, 42(6): 845-848(in Chinese).
[10] DENG D W, SUN J H, WANG X L, et al. Effect of laser power on the structure and properties of laser cladding nickel-based alloy coating [J]. Rare Metals, 2016, 40(1): 20-25(in Chinese).
[11] GONG Ch, WANG L F, ZHU G X, et al. Influence of laser additive manufacturing process parameters on residual stress of cladding layer [J]. Laser Technology, 2019, 43(2): 263-268(in Chinese).
[12] ZHANG D Q, ZHANG J Q, LI J H, et al. Effect of defocusing amount on laser cladding of self-fluxing Ni-based WC on 45# steel surface[J]. Surface Technology, 2015, 44(12): 92-97(in Chinese).
[13] LIU P L, SUN W L, HUANG Y. The effect of temperature gradient on cracks in laser cladding layer [J]. Laser Technology, 2019, 43(3): 392-396(in Chinese).
[14] LI C, WHITE R, FANG X Y, et al. Microstructure evolution characteristics of Inconel625 alloy from selective laser melting to heat treatment[J]. Materials Science & Engineering, 2017, A58(8): 20-31.
[15] PAVITHRA E, SENTHILKUMAR V S. Microstructural evolution of hydroformed Inconel625 bellows[J]. Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics, 2016, 669(5): 199-204.
[16] CHUNG K H, RODRIGUEZ R, LAVERNIA E J, et al. Grain growth behavior of cryomilled Inconel625 powder during isothermal heat treatment[J]. Metallurgical & Materials Transactions, 2002, A33(1): 125-134. doi: 10.1007/s11661-002-0011-y
[17] JEYAPRAKASH N, YANG C H, RAMKUMAR K R. Microstructure and wear resistance of laser cladded Inconel625 and Colmonoy 6 depositions on Inconel625 substrate[J]. Applied Physics, 2020, A126(6): 1-11. doi: 10.1007/s00339-020-03637-9
[18] XU F J, LV Y H, Y, LIU Y X, et al. Microstructural evolution and mechanical properties of Inconel625 alloy during pulsed plasma arc deposition process[J]. Journal of Materials Science & Technology, 2013, 29(5): 480-488.
[19] WANG X, XU X, GAO Y, et al. Research on microstructures and properties of Inconel625 coatings obtained by laser cladding with wire[J]. Journal of Alloys & Compounds, 2017, 715(8): 362-373.
[20] DINDA G P, DASGUPTA A K, MAZUMDER J. Laser aided direct metal deposition of Inconel625 superalloy: Microstructural evolution and thermal stability[J]. Materials Ence and Engineering, 2009, 509(1/2): 98-104.
[21] ROMBOUTS M, MAES G, MERTENS M, et al. Laser metal de-position of Inconel625: Microstructure and mechanical properties[J]. Journal of Laser Applications, 2012, 24(5): 2575-2581.