Study of Cu-base coating on aluminum alloy by laser cladding
-
1.
School of Sciences, Northeastern University, Shenyang 110004, China;
-
2.
State Key Laboratory of Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China
-
Corresponding author:
WANG Wei-fu, fjsun8888@sina.com
;
-
Received Date:
2007-03-07
Accepted Date:
2007-05-21
-
Abstract
According to the liquid separation property of Cu-base alloy,the Cu-base coating is obtained on the aluminum alloy by CO2 laser cladding for improving the surface strength of aluminum alloy.The results show that the matrix of the coating is Cu-base solid solution,and the main reinforcing phase is laves phase,which shows a dispersion distribution character.The reinforcing phase shows a composite structure of "Mo-rich core"+"surrounding phase".This is mainly caused by the separation of Mo-rich cores,which furnish the liquid separation with heterogeneity nucleation surface.The microhardness test shows that the microhardness of the coating is about 270HV0.05,two times higher than that of the substrate ZL104 aluminum alloy.
-
-
References
|
[1]
|
MAO Zh Q.Application of P/M parts to automobile[J].Powder Metallurgy Industry,2003,13 (1):8-11(in Chinese). |
|
[2]
|
LIANG G Y,LI G L,SU J Y.Segregation phenomena of laser alloyed Ni-Cr-Al coating on Al-Si alloy[J].Materials Science and Engineering,1997,A224 (1/2):173-176. |
|
[3]
|
ZHOU L Z,LIU Sh H,HUANG A G,et al.Laser surface alloying of cast aluminium alloy with Ni and Cr[J].Laser Technology,2004,28(4):565-568(in Chinese). |
|
[4]
|
XU J,LIU W J,KAN Y D,et al.Micrestructure and wear properties of laser cladding Ti-Al-Fe-B coatings on AA2024 aluminum alloy[J].Materials and Design,2006,27(5):405-410. |
|
[5]
|
TOMIDA S,NAKATA K.Fe-Al composite layers on aluminum alloy formed by laser surface alloying with iron powder[J].Surface and Coatings Technology,2003,174/175 (3):559-563. |
|
[6]
|
OUYANG J H,NOWOTNY S,RICHTER A,et al.Laser cladding of yttria partially stabilized ZrO2 (YPSZ) ceramic coatings on aluminum alloys[J].Ceramics International,2001,27 (1):15-24. |
|
[7]
|
WANG A H,XIE Ch Sh,HUANG W,et al.The laser-cladding of Al bronze on an Al-Si alloy[J].Rare Metal Materials and Engineering,1997,26(6):41-46(in Chinese). |
|
[8]
|
LIU Y,MAZUMDER J,SHIBATA K.Microstructural study of the interface in laser-clad Ni-Al bronze on Al alloy AA333 and its relation to cracking[J].Metallurgical and Materials Transactions,1995,A26(6):1519-1533. |
|
[9]
|
NAKAGAWA Y.Liquid immiscibility in copper-iron and copper-co-balt systems in the supercooled state[J].Acta Metallurgica,1958,6(11):704-711. |
|
[10]
|
MUNITZ A.Liquid separation in Cu-Co and Cu-Co-Fe alloys solidified at high cooling rates[J].Journal of Materials Science,1998,33(14):3639-3649. |
|
[11]
|
MUNITZ A,ABBASCHIAN R.Two-melt separation in superecoled Cu-Co alloy solidifying in a drop-tube[J].Journal of Materials Sci-ence,1991,26 (23):6446-6458. |
|
[12]
|
MUNITZ A,ELDER-RANDALL S P,ABBASCHIAN R.Supercooling effects in Cu-10wt pct Co alloy solidified at different cooling rates[J].Metallurgical Transactions,1992,A23 (6):1817-1827. |
|
[13]
|
SCHMIDT R D,FERRISS D P.New materials resistant to wear and corrosion to 1000℃[J].Wear,1975,32(3):279-289. |
|
[14]
|
MASSALSKI T B.Binary alloy phase diagrams[M].Ohio:American Society for Metals,1986:935. |
-
-
Proportional views
-
Map
DownLoad: