Advanced Search

ISSN1001-3806 CN51-1125/TN Map

Volume 38 Issue 2
Mar.  2014
Article Contents
Turn off MathJax

Citation:

Design and calibration of the Fabry-Perot etalon in Rayleigh backscattering Doppler wind lidar

  • Corresponding author: WU Haibin, whb62@163.net
  • Received Date: 2013-04-18
    Accepted Date: 2013-07-17
  • The Fabry-Perot etalon was the key component of a Rayleigh Doppler wind lidar. In order to accurately determine the Doppler shift proportional to the wind velocity, the principle of Rayleigh Doppler frequency measurement was deeply analyzed, and the optimum parameters of the etalon were determined after analyzing the detection error at the maximum height designed. The calibration method and idea were introduced in detail. The factors making the full width at half maximum(FWHM) of the transmission curves broadened were analyzed, the calibration accuracy of the transmission curve affecting the velocity sensitivity and the system measuring error was also analyzed in detail. The design and calibration were verified in experiments. The result indicated that the velocity sensitivity of etalon decreased 0.118%/(m·s-1) due to the broadened FWHM of transmission curves and with the signal-to-noise ratio no less than 10, the accuracy of the line-of-sight velocity increased 2m/s at 40km altitude height.
  • 加载中
  • [1]

    XU W J, SUN D S, SHU Z F, et al. Wind velocity inversion algo- rithm for triple-channel Rayleigh Doppler wind lidars[J]. Laser Technology, 2011, 35(4): 481-485 (in Chinese).
    [2]

    LI C, SHU Zh F, XU W J, et al. Development of molecule wind lidar receiver based on Fabry-Perot[J]. Laser Technology, 2011, 35(2): 156-159 (in Chinese).
    [3]

    KORB C L, GENTRY B M, LI S X, et al. Theory of the double-edge technique for Doppler lidar wind measurement[J]. Applied Optics, 1998, 37(15): 3097-3104.
    [4]

    FLESIA C, KORB C L. Theory of the double-edge molecular technique for Doppler lidar wind measurement[J]. Applied Optics, 1999, 38(3): 432-440.
    [5]

    KORB C L, GENTRY B M, WENG C Y. The edge technique: theory and application to the lidar measurement of atmospheric winds[J]. Applied Optics, 1992, 31(21): 4202-4213.
    [6]

    KORB C L, GENTRY B M, LI S X. Edge technique Doppler lidar wind measurements with high vertical resolution[J]. Applied Optics, 1997, 36(24): 5976-5983.
    [7]

    GENTRY B M, CHEN H. Tropospheric wind measurements obtained with the goddard lidar observatory for winds (GLOW): validation and performance[J]. Proceedings of IEEE, 2001, 4484:74-81.
    [8]

    GENTRY B M, CHEN H L. Profiling tropospheric winds with the goddard lidar observatory for winds (GLOW) [C]//Proceedings of the 21st International Laser Radar Conference.Washington,D C,USA:NASA,2002:4p.
    [9]

    GENTRY B M, CHEN H L, LI S X. Wind measurements with 355nm molecular Doppler lidar[J]. Optics Letters, 2000, 25(17): 1231-1233.
    [10]

    FLESIA C, KORB C L, CHRISTINA H. Double-edge molecular measurement of lidar wind profiles at 355nm[J]. Optics Letters, 2000, 25(19): 1466-1468.
    [11]

    SHEN F H, CHA H, SUN D S, et al. Low tropospheric wind measurement with Mie Doppler Lidar[J]. Optical Review, 2008, 15(4): 204-209.
    [12]

    TANG L,WANG Y T, SHU Zh F, et al. Analysis of detectors and transmission curves correction of mobile rayleigh Doppler lidar[J]. Chinese Physics Letters, 2010, 27(11):114207.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article views(3920) PDF downloads(730) Cited by()

Proportional views

Design and calibration of the Fabry-Perot etalon in Rayleigh backscattering Doppler wind lidar

    Corresponding author: WU Haibin, whb62@163.net
  • 1. Department of Physics and Engineering, Hefei Normal University, Hefei 230031, China;
  • 2. School of Physics and Material Sciences, Anhui University, Hefei 230031, China;
  • 3. School of Earth and Space Sciences, University of Science and Technology of China, Hefei 230031, China

Abstract: The Fabry-Perot etalon was the key component of a Rayleigh Doppler wind lidar. In order to accurately determine the Doppler shift proportional to the wind velocity, the principle of Rayleigh Doppler frequency measurement was deeply analyzed, and the optimum parameters of the etalon were determined after analyzing the detection error at the maximum height designed. The calibration method and idea were introduced in detail. The factors making the full width at half maximum(FWHM) of the transmission curves broadened were analyzed, the calibration accuracy of the transmission curve affecting the velocity sensitivity and the system measuring error was also analyzed in detail. The design and calibration were verified in experiments. The result indicated that the velocity sensitivity of etalon decreased 0.118%/(m·s-1) due to the broadened FWHM of transmission curves and with the signal-to-noise ratio no less than 10, the accuracy of the line-of-sight velocity increased 2m/s at 40km altitude height.

Reference (12)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return