Relation between the scale factor and temperature of small low cost ring laser gyroscopes
-
1.
College of Opto-Electronic Science and Engineering, National University of Defense Technology, Changsha 410073, China
-
Corresponding author:
XU Guang-ming, guangmxu@sina.com
-
Received Date:
2012-05-02
Accepted Date:
2012-07-12
-
Abstract
In order to study the relation between the scale factor and temperature of small low cost ring laser gyroscopes (RLG) deeply, and improve its performance without increasing cost on hardware, theoretical analysis and experiments were carried out. Data of scale factor both in given temperature and in slowly changing temperature were obtained. Those experimental data conformed to the theoretical data approximately. The equation between scale factor and temperature was built and thus the scale factor error caused by temperature was apparently reduced.
-
-
References
[1]
|
ZHANG Q H, HU Sh M, LU G F. Research on new signal processing method of mechanically dithered ring laser gyro[J].Optical Technique, 2010, 36(1):126-129(in Chinese). |
[2]
|
KILLPATRIC J. The GG1308—a small low-cost RLG electronic gyroscope//Guidance,Navigation and Control Conference. Williamsburg, VA, USA: American Institute of Aeronautics and Astronautics,1986:755-759. |
[3]
|
ZHANG P F. Research on strapdown inertial navigation system with mechanically dithered ring laser gyroscope and its real-time temperature compensating approach. Changsha: National University of Defense Technology, 2006:37 (in Chinese). |
[4]
|
HE H O, ZHAO Zh, SHAO Y M, et al. Multi-factors modeling on temperature error of laser gyro using BP network[J]. Piezoelectectrics & Acoustooptics, 2007, 29(2):222-223(in Chinese). |
[5]
|
PAN X F, YANG J, WU M P. RLG bias compensation method in complex temperature variation environment[J]. Journal of Chinese Inertial Technology, 2011, 19(2):234-238(in Chinese). |
[6]
|
GAO B L, LI Sh T. Ring laser gyroscope[M]. Changsha: National University of Defense Technology Press, 1984:40-41(in Chinese). |
[7]
|
IEEE Aerospace and Electronic Systems Society. IEEE Std 647-2006 IEEE standard specification format guide and test procedure for single-axis lasergyro[S]. New York, USA: Amorican National Standards Institute,2006. |
[8]
|
XU X D, ZHAO Zh, WANG Y, et al. The accurate modeling of laser gyro scale factor based on BP netwok[J].Chinese Journal of Sensors and Actuators, 2005, 18(2):398-400 (in Chinese). |
[9]
|
JIANG Y S. The modueling and analysis of laser gyro temperature error based on neural network. Harbin: Harbin Institute of Technology,2006:5-6(in Chinese). |
-
-
Proportional views
-