High-stability and large-displacement measurement system based on multiplexed fiber interferometry
-
1.
Department of Physics, School of Science, Beijing Jiaotong University, Beijing 100044, China
-
Corresponding author:
XIE Fang, fxie@bjtu.edu.cn
-
Received Date:
2012-04-23
Accepted Date:
2012-05-21
-
Abstract
In order to make the displacement measuring system achieve the large-range and high-resolution,theoretical analysis and experimental verification were conducted with the multiplexed fiber interferometer.Two fiber Michelson interferometers sharing common-interferometric-optical path were configured by employing fiber Bragg gratings as in-fiber reflective mirrors.One of the interferometer was used to stabilize the measurement system with a feedback loop compensating the influence induced by the environmental disturbance so that the measurement system was kept stable enough for on-line measurement,while the other one was for performing the measurement task.Two different wavelengths are working simultaneously in the measurement interferometer.The measurement range determined by the synthetic-wavelength interferometric signal of the two wavelengths was expanded to be larger than 1mm,while the measurement resolution determined by one of the single-wavelength interferometric signals was maintained less than 1nm.The displacement measurement system achieved the large-range and high-resolution purpose based on multiplexed fiber interferometry.
-
-
References
|
[1]
|
HAND D P,CAROLAN T A,BARTON J S,et al.Profile measurement of optically rough surfaces by fiber-optic interferometry[J].Optics Letters,1993,18(16):1361-1363. |
|
[2]
|
JACKSON D A,DANDRIDGE A,TVENTEN A B.Elimination of drift in a single-mode optical fiber interferometer using a piezoeletric stretched coiled fiber[J].Applied Optics,1980,19(17):2926-2929. |
|
[3]
|
LIN D J,JIANG X Q,XIE F,et al.High stability multiplexed fibre interferometer and its application on absolute displacement measurement and on-line surface metrology[J].Optics Express,2004,12 (23):5729-5734. |
|
[4]
|
JIANG M Zh,GERHARD E.A simple strain sensor using a thin film as a low-finesse fiber-optic Fabry-Perot interferometer[J].Sensors and Actuators,2001,A88(1):41-46. |
|
[5]
|
SEAT H C,OUISSE E,MORTEAU E,et al.Vibration-displacement measurements based on a polarimetric extrinsic fiber Fabry-Perot interferometer[J].Measurement Science Technology,2003,14(6):710-716. |
|
[6]
|
MEGGITT B T,HALL C J,WEIR K.An all fibre white light interferometric strain measurement system[J].Sensors and Actuators, 2000,A79(1):1-7. |
|
[7]
|
NGUYEN L V,HWANG D,MOON S,et al.High temperature fiber sensor with high sensitivity based on core diameter mismatch[J].Optics Express,2008,16(15):11369-11375. |
|
[8]
|
WANG W H,WU N,TIAN Y,et al.Miniature all-silica optical fiber pressure sensor with an ultrathin uniform diaphragm[J].Optics Express,2010,18(9):9006-9014. |
|
[9]
|
XIE F,ZHANG Sh L,LI Y,et al.Study on the reflected wavelength shift based on sensing elements of in-fiber Bragg gratings[J].Laser Technology,2002,26(2):84-85(in Chinese). |
|
[10]
|
LI D,ZHANG X H,HUANG J B.Theoretical analysis of feedback control on input light polarization of fiber optic interferometer[J]. Laser Technology,2006,30(2),126-129(in Chinese). |
|
[11]
|
RAO Y J,JACKSON D A.Recent progress in fibre opticlow-coherent interferometry[J].Measurement Science Technology,1996,7 (7):981-999. |
|
[12]
|
XIE F,CHEN Zh M,REN J Y.A stabilized fiber 3×3 coupler interferometric measurement system based on a first order feedback loop[J].Laser Technology,2010,34(3):297-299(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: