Microstructure and properties of laser transformation hardening layer on 1Cr18Ni9Ti
-
1.
Department of Material Engineering, Sichuan College of Architectural Technology, Deyang 618000, China
-
Received Date:
2010-06-08
Accepted Date:
2010-07-17
-
Abstract
To investigate the change of microstructure and properties, laser transformation hardening was carried out on 1Cr18Ni9Ti stainless steel, and the microstructure and properties of laser transformation hardened layers were investigated by means of scanning electron microscope, X-ray diffractometer, microhardnessmeter, abrasive wear testing machine, potentiostat etc. The hardness, wear resistance, corrosion resistance data of laser transformation hardening layer were obtained by theoretical analysis and experimental verification. The result indicated that the laser transformation hardening layer was mainly consisted of austenite, martensite, Fe-(Cr, Ni), Fe etc. With the increase of the laser power, the average microhardness of laser hardening layers increased first and then decreased. The average microhardness reached the highest (223.5HK) when laser power was 750W. Wear resistance reached the best (whose wear rate is 56% of the substrate) when the power was 550W. Corrosion resistance was improved after laser transformation hardening, passivation current density of the smallest dimension was 33% of the substrate, the maximum length of the passive zone of stability was seven times of the substrate. The results are helpful to study the change of microstructure and properties of 1Cr18Ni9Ti stainless steel.
-
-
References
|
[1]
|
HE Q,SU H L,LIU H Z.Research on 40Cr steel for high-speed spinde laser transformation hardening technics[J].Chinese Journal of Lasers,2009，36(8):2192-2195(in Chinese). |
|
[2]
|
WU G,SONG G M,HUANG W J.Influence of laser processing parameters on the case-depth and the hardness[J].Laser Technology,2007,31(2):163-165(in Chinese). |
|
[3]
|
HUANG K J,XIE C H,XU D S.State of the arts of pulsed laser remelting and pulsed laser phase transformation[J].Laser Technology,2003,27(2):130-133(in Chinese). |
|
[4]
|
YAO M J,ZHAO D,LIANG E J.Laser surface hardening for cutting fibre roller [J] ．Heat Treatment of Metals,2003,28(2):42-45(in Chinese). |
|
[5]
|
HUA Y Q,CHEN R F,YANG J C,et al.Study on wear-resistance of laser quenched and shocked 40Cr steel[J].Tribology,2003,23(5):448-450(in Chinese). |
|
[6]
|
LIU L,WU D J,LI S C,et al.Microstructure and wear resistance of laser hardening layer on 30CrMnSiA steel[J].Applied Laser,2003,23(2):69-70(in Chinese). |
|
[7]
|
SUN Q L,SUN J.The application and development thughtfulness of laser surface treatment technology in laigang[J].Laser Journal,2001,22(3):21(in Chinese). |
|
[8]
|
MA K,YANG Y L,WANG Ch Sh,et al.Effect of laser hardening technical parameters on hardened depth of 40Cr steel[J].Laser Technology,2002,26(4):262-263(in Chinese). |
|
[9]
|
ZHANG P L,DING M,YAO Sh,et al.Research of laser transformation hardening on mild steel[J].Laser Technology,2009,33(6):586-589(in Chinese). |
|
[10]
|
YE Y X,FU Y H,YANG G C,et al.Study on laser phase transformation hardening of HT250 by high speed axis flow CO2 laser[J].Chinese Journal of Lasers,2002,29(10):945-947(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: