Advanced Search

ISSN1001-3806 CN51-1125/TN Map

Volume 34 Issue 6
Mar.  2011
Article Contents
Turn off MathJax

Citation:

High power Er3+/Yb3+ co-doped fiber amplifiers with optimum fiber length

  • Corresponding author: WANG Ji, jiji_wang@163.com
  • Received Date: 2009-12-15
    Accepted Date: 2010-04-14
  • In order to investigate 1555nm high power fiber amplifiers with different gain length,a two-stage hybrid structure was employed,in which an erbium-doped fiber amplifier(EDFA) was used as a pre-amplifier for signal amplification and higher signal-noise ratio and an erbium/ytterbium co-doped double-cladding fiber amplifier (EYCDFA) was used as a master amplifier. The EYCDFA with special double-cladding configuration can couple more pump power into the system.The optimal,length of erbium-ytterbium co-doped fiber was investigated experimentally and analyzed theoretically.Under the conditions of 10mW signal power,318.58mW EDFA pump power,11.71W EYCDFA pump power and 14m gain length,2.11W output power was achieved.Amplified spontaneous emission spectrum appeared in L-band because of the over long gain fiber.It shows that there exists an optimal length at certain pump power and signal power,and the result is good for the study of high-power fiber amplifiers.
  • 加载中
  • [1]

    LEI J Sh,HUANG Zh M,GUO Zh H.Application of optical fiber amplifier for satellite laser communication[J].Laser Technology,2001,25(4):378-381(in Chinese).
    [2]

    TANG W G.Study of the double cladding Er3+-Yb3+ co-doped fiber amplifier with high power[D].Chengdu:University of Electronic Science and Technology of China,2005:3-4(in Chinese).
    [3]

    LU Z G,LIU J R,SUN F G,et al.A hybrid fiber amplifier with 36.9dBm output power and 70dB gain[J].Opt Commun,2005,25(6):352-357.
    [4]

    LING L,ZHANG Sh,LONG H,et al.Theory model forward amplified spontaneous emission in Er3+/Yb3+ co-doped double clad fiber amplifiers[J].Chinese Journal of Lasers,2008,35(5):734-738(in Chinese).
    [5]

    KE X P.Study of the properties of Er3+/Yb3+ co-doped fiber amplifier[J].Journal of Wuhan University of Technology(Information Management Engineering),2006,28(7):109-111(in Chinese).
    [6]

    WANG H,LI Y G,CHEN Sh P,et al.Double-clad Er3+/Yb3+ co-doped fiber amplifier[J].Optoelectronic Technology,2005,25(4):234-238(in Chinese).
    [7]

    ZHANG F P,LOU Q H,ZHOU J,et al.High power double-clad fiber amplifiers[J].Laser Optoelectronics Progress,2007(1):38-44(in Chinese).
    [8]

    WU Y X,MA X M,ZHAO X J.Effects of Er3+ and Yb3+ concentration on gain and noise coefficient of fiber amplifier[J].Acta Optica Sinica,2008,28(6):1057-1061(in Chinese).
    [9]

    ZHUANG M L,ZHAO Sh H,DONG Sh F,et al.Numerical analysis of the population distribution characteristics in Er3+/Yb3+ co-doped double-clad fiber amplifiers[J].Laser Technology,2004,28(4):379-382(in Chinese).
    [10]

    HUANG W C,MING H,XIE J P,et al.Study on L-band erbium-doped optic fiber super-fluorescent light source and amplifier[J].Opto-electronic Engineering,2002,29(6):50-52(in Chinese).
    [11]

    ELDAD Y,AMOS H.Efficiency optimization of high-power,Er3+-Yb3+-codoped fiber amplifiers for wavelength-division-multiplexing applications[J].J O S A,2003,B20(6):1189-1197.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article views(5038) PDF downloads(258) Cited by()

Proportional views

High power Er3+/Yb3+ co-doped fiber amplifiers with optimum fiber length

    Corresponding author: WANG Ji, jiji_wang@163.com
  • 1. College of Science, Changchun Universily of Science and Technology, Changchun 130022, China

Abstract: In order to investigate 1555nm high power fiber amplifiers with different gain length,a two-stage hybrid structure was employed,in which an erbium-doped fiber amplifier(EDFA) was used as a pre-amplifier for signal amplification and higher signal-noise ratio and an erbium/ytterbium co-doped double-cladding fiber amplifier (EYCDFA) was used as a master amplifier. The EYCDFA with special double-cladding configuration can couple more pump power into the system.The optimal,length of erbium-ytterbium co-doped fiber was investigated experimentally and analyzed theoretically.Under the conditions of 10mW signal power,318.58mW EDFA pump power,11.71W EYCDFA pump power and 14m gain length,2.11W output power was achieved.Amplified spontaneous emission spectrum appeared in L-band because of the over long gain fiber.It shows that there exists an optimal length at certain pump power and signal power,and the result is good for the study of high-power fiber amplifiers.

Reference (11)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return