[1] ZHAI Zh Y, MEI X S, WANG W J, et al. Research advancement on laser etching technology of silicon carbide ceramic matrix composite[J]. Chinese Journal of Lasers, 2020, 47(6): 0600002(in Chinese). doi: 10.3788/CJL202047.0600002
[2] LI Ch R, GAO C, SHI P Ch, et al. Multi-scale interface simulation research and development of fiber reinforced resin composites[J]. Composites Science and Engineering, 2020(11): 116-122(in Chinese).
[3] JI L B, ZHU X W, DING J P, et al. Progress in research and application on carbon fiber reinforced polymer in passenger cars[J]. Automotive Digest, 2020(9): 17-22(in Chinese).
[4] ZHANG W Q, LI Zh C, WU T Y, et al. Molecular simulation research and development of cross-linked structure and macroscopic properties of epoxy resin and its composites[J]. Acta Materiae Compositae Sinica, 2019, 36(2): 269-276(in Chinese).
[5] MELTEM A K, HASAN G. A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials[J]. Defence Technology, 2018, 14(4): 318-326. doi: 10.1016/j.dt.2018.02.001
[6] JIAN L Y, LIN Y X. Review of milling of carbon fiber reinforced plastic[J]. Tool Engineering, 2014, 48(4): 3-6(in Chinese).
[7] PHAPALE K, SINGH R, SINGH R. Comparative assessment of delamination control techniques in conventional drilling of CFRP[J]. Procedia Manufacturing, 2020, 48: 123-130. doi: 10.1016/j.promfg.2020.05.028
[8] PHAPALE K, SINGH R, PATIL S, et al. Delamination characterization and comparative assessment of delamination control techniques in abrasive water jet drilling of CFRP[C]// 44th North American Manufacturing Research Conference. Amsterdam, The Netherlands: Elsevier Science, 2016: 521-535.
[9] SEZER M, UGUR K, MEHMET B, et al. Cryogenic machining of carbon fiber reinforced plastic (CFRP) composites and the effects of cryogenic treatment on tensile properties: A comparative study[J]. Composites, 2018, B147: 1-11.
[10] KAKINUMA Y, ISHIDA T, KOIKE R, et al. Ultrafast feed drilling of carbon fiber-reinforced thermoplastics[C]//15th Machining Innovations Conference for Aerospace Industry. Amsterdam, The Netherlands: Elsevier Science, 2015: 91-95.
[11] AKSHAY H, DILPREET S, SAGAR K, et al. Machining damage in FRPs: Laser versus conventional drilling[J]. Composites, 2016, A82: 42-52.
[12] YE Y Y, JIA S H, XU Z F, et al. Research on hole drilling in carbon fiber reinforced composite by using laser cutting method[J]. Aeronautical Manufacturing Technology, 2019, 62(18): 50-55(in Chinese).
[13] STOCK J W, ZAEH M F, SPAETH J P. Remote laser cutting of CFRP: Influence of the edge quality on fatigue strength[J]. Proceedings of the SPIE, 2014: 8963: 89630T.
[14] PANG S Q, LIU W Ch. A study on the process and mechanisms of laser machining of high-performance composites[J]. Acta Armamentarii, 1992, 13(4): 84-91(in Chinese).
[15] TAO N, CHEN G Y, YU T Y, et al. Dual-beam laser drilling process for thick carbon fiber reinforced plastic composites plates[J]. Journal of Materials Processing Technology, 2020, 281: 116590. doi: 10.1016/j.jmatprotec.2020.116590
[16] TAKAHASHI K, TSUKAMOTO M, MASUNO S, et al. Heat conduction analysis of laser CFRP processing with IR and UV laser light[J]. Composites, 2016, A84: 114-122.
[17] ZHU D Zh, HU J. Experimental study on picosecond pulsed laser machining of carbon fiber reinforced plastics[J]. Aeronautical Manufacturing Technology, 2017, 60(20): 54-59(in Chinese).
[18] EL-HOFY M H, EL-HOFY H. Laser beam machining of carbon fiber reinforced composites: A review[J]. Springer London, 2019, 101(9): 2965-2975.
[19] ZHANG K H, YU Y, ZHANG X M, et al. Laser cutting induced heat affected zone in fiber reinforced polymer: A comparative analysis[J]. Navigation and Control, 2019, 18(5): 60-66(in Chinese).
[20] ZHANG J L, LIU G D, WANG W P, et al. Simulation to thermal ablation of carbon fiber reinforced composites under laser irradiation[J]. High Power Laser and Particle Beams, 2013, 25(8): 1888-1892(in Chinese). doi: 10.3788/HPLPB20132508.1888
[21] ROMOLI L, FISCHER F, KLING R. A study on UV laser drilling of PEEK reinforced with carbon fibers[J]. Optics and Lasers in Engineering, 2011, 50(3): 449-457.
[22] DELL'ERBA M, GALANTUCCI L M, MIGLIETTA S. An experimental study on laser drilling and cutting of composite materials for the aerospace industry using excimer and CO2 sources[J]. Composites Manufacturing, 1992, 3(1): 14-19. doi: 10.1016/0956-7143(92)90178-W
[23] MEIJER J, DU K, GILLNER A, et al. Laser machining by short and ultrashort pulses, state of the art and new opportunities in the age of the photons[J]. CIRP Annals-Manufacturing Technology, 2002, 51(2): 531-550. doi: 10.1016/S0007-8506(07)61699-0
[24] GOEKE A, EMMELMANN C. Influence of laser cutting parameters on CFRP part quality[J]. Physics Procedia, 2010, B5: 253-258.
[25] FUJITA M, OHKAWA H, SOMEKAWA T, et al. Wavelength and pulsewidth dependences of laser processing of CFRP[C]//9th International Conference on Photonic Technologies. Amsterdam, The Netherlands: Elsevier Science, 2016: 1031-1036.
[26] WOLYNSKI A, HERRMANN T, MUCHA P, et al. Laser ablation of CFRP using picosecond laser pulses at different wavelengths from UV to IR[J]. Physics Procedia, 2011, B12: 292-301.
[27] LI J Y, CHAO J H, MING Z, et al. Study on UV laser cutting carbon fibre reinforced composites[J]. Applied Mechanics and Materials, 2014, 3484: 738-742.
[28] JIANG Sh Sh. Research of damage characteristics of carbon fiber reinforced epoxy resin by millisecond/nanosecond laser[D]. Changchun: Changchun University of Science and Technology, 2018: 9-46(in Chinese).
[29] ZHAO X. Research on processing of carbon fiber materials based on the short pulse laser[D]. Haerbin : Harbin Institute of Technology, 2014: 12-23(in Chinese).
[30] ZHANG X J, WANG J Ch, SHEN J J. Research status of thermal damage in laser processing of carbin fiber reinforced plastic[J]. Applied Laser, 2019, 39(6): 1041-1044(in Chinese).
[31] HERZOG D, JAESCHKE P, MEIER O, et al. Investigations on the thermal effect caused by laser cutting with respect to static strength of CFRP[J]. International Journal of Machine Tools and Manufacture, 2008, 48(12): 1464-1473.
[32] FENOUGHTY K A, JAWAID A, PASHBY I R. Machining of advanced engineering materials using traditional and laser techniques[J]. Elsevier, 1994, 42(4): 391-400.
[33] SCHNEIDER F, WOLF N, PETRING D. High power laser cutting of fiber reinforced thermoplastic polymers with CW- and pulsed lasers[C]//7th International WLT Conference on Lasers in Manufacturing. Amsterdam, The Netherlands: Elsevier Science, 2013: 415-420.
[34] WALTER J, BRODESSER A, HUSTEDT M, et al. Laser processing of carbon fiber reinforced plastics-release of carbon fiber segments during short-pulsed laser processing of CFRP[C]//9th International Conference on Photonic Technologies. Amsterdam, The Netherlands: Elsevier Science, 2016: 1021-1030.
[35] OLIVEIRA V, SHARMA S P, DEMOURA M F S F, et al. Surface treatment of CFRP composites using femtosecond laser radiation[J]. Optics and Lasers in Engineering, 2017, 94: 37-43. doi: 10.1016/j.optlaseng.2017.02.011
[36] OHIN S, LEE Y, PARK Y B, et al. Investigation of cut quality in fiber laser cutting of CFRP[J]. Optics and Laser Technology, 2019, 113: 129-140. doi: 10.1016/j.optlastec.2018.12.018
[37] LEONE C, GENNA S. Heat affected zone extension in pulsed Nd∶YAG laser cutting of CFRP[J]. Composites Part, 2018, B140: 174-182.
[38] RIVEIRO A, QUINTERO F, LUSQUINOS F, et al. Laser cutting of carbon fiber composite materials[C]//7th Manufacturing-Engineering-Society International Conference. Amsterdam, The Netherlands: Elsevier Science, 2017: 388-395.
[39] LI M J, LI Sh, YANG X J, et al. Fiber laser cutting of CFRP laminates with single-and multi-pass strategy: A feasibility study[J]. Optics and Laser Technology, 2018, 107: 443-453. doi: 10.1016/j.optlastec.2018.06.025
[40] LEONE C, PAPA I, TAGLIAFERRI F, et al. Investigation of CFRP laser milling using a 30W Q-switched Yb∶YAG fiber laser: Effect of process parameters on removal mechanisms and HAZ formation[J]. Composites, 2013, A55: 129-142.
[41] MATHEW J, GOSWAMI G L, RAMAKRISHNAN N, et al. Parametric studies on pulsed Nd∶YAG laser cutting of carbon fibre reinforced plastic composites[J]. Journal of Materials Processing Technology, 1999, 89: 198-203.
[42] FREITAG C, ONUSEIT C, WEBER R, et al. High-speed observation of the heat flow in CFRP during laser processing[C]//7th Conference on Laser Assisted Net shape Engineering (LANE) / International Conference on Photonic Technologies. Amsterdam, The Netherlands: Elsevier Science, 2012: 171-178.
[43] TAKAHASHI K, TSUKAMOTO M, MASUNO S, et al. Influence of laser scanning conditions on CFRP processing with a pulsed fiber laser[J]. Journal of Materials Processing Technology, 2015, 222: 110-121. doi: 10.1016/j.jmatprotec.2015.02.043
[44] PAGANO N, ASCARI A, LIVERANI E, et al. Laser Interaction with Carbon Fibre Reinforced Polymers[C]//9th CIRP International Conference on Intelligent Computation in Manufacturing Engineering. Amsterdam, The Netherlands: Elsevier Science, 2015: 423-427.
[45] HE F, HU Zh L, LIU P. Influence of process parameters on cutting quality in optical fiber laser cutting[J]. Forging & Stamping Technology, 2020, 45(11): 82-88.
[46] FUCHS A N, SCHOEBER M, TREMMER J, et al. Laser cutting of carbon fiber fabrics[C]//7th International WLT Conference on Lasers in Manufacturing. Amsterdam, The Netherlands: Elsevier Science, 2013: 372-380.
[47] HUA Y Q, XIAO T, XUE Q, et al. Experimental study about laser cutting of carbon fiber reinforced polymer[J]. Laser Technology, 2013, 37(5): 565-570(in Chinese).
[48] NEGARESTANI R, LIN L, SEZER H K, et al. Nano-second pulsed DPSS Nd∶YAG laser cutting of CFRP composites with mixed reactive and inert gases[J]. The International Journal of Advanced Manufacturing Technology, 2010, 49(5/8): 553-566.
[49] KONONENKO T V, FREITAG C, KOMLENOK M S, et al. Oxygen-assisted multipass cutting of carbon fiber reinforced plastics with ultra- shortlaser pulses[J]. Journal of Applied Physics, 2014, 115(10): 103-107.
[50] KAAKKUNEN J J J, SILVENNOINEN M, PAIVASAARI K, et al. Water-assisted femtosecond laser pulse ablation of high aspect ratio holes[J]. Physics Procedia, 2011, B12: 89-93.
[51] WEE L M, LING E K, CHI W T, et al. Solvent-ssisted laser drilling of silicon carbide[J]. International Journal of Applied Ceramic Technology, 2011, 8(6): 1263-1276. doi: 10.1111/j.1744-7402.2010.02575.x
[52] ZHANG Ch. Experimental study on water jet assisted laser cutting of carbin fiber reinforced polymer comosite[D]. Wuxi: Jiangnan University, 2018: 29-47(in Chinese).
[53] VIBOON T, KETSADA K, QI H. Investigation into laser machining of carbon fiber reinforced plastic in a flowing water layer[J]. The International Journal of Advanced Manufacturing Technology, 2019, 104(9/12): 3629-3645. doi: 10.1007/s00170-019-04131-0
[54] SUN D, HAN F Zh, YING W Sh. The experimental investigation of water jet-guided laser cutting of CFRP[J]. The International Journal of Advanced Manufacturing Technology, 2019, 102(4): 719- 729.
[55] SUN D, HAN F Zh, YING W Sh, et al. Surface integrity of water jet guided laser machining of CFRP[C]//4th CIRP Conference on Surface Integrity. Amsterdam, The Netherlands: Elsevier Science, 2018: 71-74.
[56] ZHANG Y N, QIAO H Ch, ZHAO J B, et al. Numerical simulation of water jet-guided laser micromachining of CFRP[J]. Materials Today Communications, 2020, 25: 2352-4928.
[57] SOBRI S A, HEINEMANN R, WHITEHEAD D. Development of laser drilling strategy for thick carbon fiber reinforced polymer composites (CFRP)[J]. Polymers, 2020, 12(11): 2674. doi: 10.3390/polym12112674
[58] SONG Sh H. Experimental study on laser cutting of carbon fiber composites[J]. Machinery, 2015, 53(9): 49-51(in Chinese).
[59] KUMAR D, SINGH K K. Effect of nanofiller on fibre laser drilling quality of carbon fibre reinforced polymer composite laminates[J]. Proceedings of the Institution of Mechanical Engineers, 2019, 233(4): 857-870. doi: 10.1177/0954408918812253
[60] FAN Y Q. Study on processing characteristics of CFRP based on deionized water mixed with carbon nanotubes using EDM[D]. Haerbin: Harbin Institute of Technology, 2018: 12-63(in Chinese).
[61] HAN X, WANG X Y. Experimental study on laser cutting of double-layer carbon fiber reinforced plastics sheets[J]. Modern Machinery, 2019, 212(4): 50-56(in Chinese).
[62] DING J G, GONG Y, YANG F H, et al. Research progress on recovery methods of thermosetting resin composites[J]. Modern Chemical Industry, 2020, 40(3): 22-25(in Chinese).
[63] ZHANG Q, ZHANG Sh J. Research development on carbon fiber reinforced thermoplastic composites[J]. Petrochemical Technology, 2020, 49(12): 1153-1164(in Chinese).
[64] YU D Y, WANG X Y. Temperature field simulation of single-layer carbon fiber reinforced plastics in multi-directional laser cutting[J]. Laser and Optoelectronics Progress, 2017, 54(11): 111409(in Ch-inese). doi: 10.3788/LOP54.111409