[1] TANG S, HU C. Design, preparation and properties of carbon fiber reinforced ultra-high temperature ceramic composites for aerospace applications:A review[J]. Journal of Materials Science & Technology, 2017, 33(2): 3-16.
[2] TAN X H, SHAN J G, TANG L, et al. Study on laser surfi-sculpt of GMW2 autobody sheet steel for carbon fiber reinforced polymer/steel dissimilar joint[J]. Chinese Journal of Lasers, 2015, 42(3): 0303002(in Chinese). doi: 10.3788/CJL201542.0303002
[3] JIANG Y, CHEN G Y, ZHOU C, et al. Research of carbon fiber reinforced plastic cut by picosecond laser [J]. Laser Technology, 2017, 41(6): 821-825(in Chinese).
[4] JIANG Sh Sh, CAI J X, JIN G Y, et al. Research of damage morphology of carbon fiber epoxy resin irradiated by millisecond/nanosecond pulsed laser[J]. Laser Technology, 2018, 42(6): 775-779(in Chinese).
[5] JIA Z, SU Y, NIU B, et al. Deterioration of polycrystalline diamond tools in milling of carbon-fiber-reinforced plastic[J]. Journal of Composite Materials, 2016, 19(2):201-210.
[6] WANG F J, CHENG D, ZHAO M, et al. Influence of cooling air direction on tool wear and hole quality in CFRP drilling[J]. Acta Materiae Compositae Sinica, 2019, 36(2): 410-417(in Chinese).
[7] STAEHR R, BLUERNEL S, JAESCHKE P, et al. Laser cutting of composites—Two approaches toward an industrial establishment[J]. Journal of Laser Applications, 2016, 28(2): 192-203.
[8] CHEN Y, GE E D, FU Y C, et al. Review and prospect of drilling technologies for carbon fiber reinforced polymer[J]. Acta Materiae Compositae Sinica, 2015, 32(2): 301-316(in Chinese).
[9] SALAMA A, LI L, MATIVENGA P, et al. High-power picosecond laser drilling/machining of carbon fibre-reinforced polymer (CFRP) composites[J]. Applied Physics, 2016, A122(2): 73-81.
[10] MUCHA P, BERGER P, WEBER R, et al. Calibrated heat flow model for the determination of different heat-affected zones in single-pass laser-cut CFRP using a CW CO2 laser[J]. Applied Physics, 2015, A118(4): 1509-1516.
[11] NEGARESTANI R, SUNDAR M, SHEIKH M A, et al. Numerical simulation of laser machining of carbon-fibre-reinforced composites [J]. Journal of Engineering Manufacture, 2010, 224(7): 1017-1027. doi: 10.1243/09544054JEM1662
[12] OHKUBO T, TSUKAMOTO M, SATO Y. Numerical simulation of combustion effects during laser processing of carbon fiber reinforced plastics[J]. Applied Physics, 2016, A122(3): 196-203.
[13] LI Z K, LU D, WANG Q, et al. Numerical simulation of the orthogonal cutting of carbon fiber reinforced composite material[J]. Advanced Materials Research, 2014, 29(9): 1246-1250.
[14] YU D Y, WANG X Y. Temperature field simulation of single-layer carbon fiber reinforced plastics in multi-directional laser cutting[J]. Laser & Optoelectronics Progress, 2017, 54(11): 111409(in Chinese).
[15] ZHANG Ch, YUAN G F, CONG Q D, et al.Analysis and prediction on laser cutting of CFRP[J]. Laser & Infrared, 2018, 48(7): 821-826(in Chinese).
[16] LI H J. Temperature field analysis of single-layer HfO2 film induced by long-pulse laser[J]. Journal of Applied Optics, 2014, 35(5): 912-916(in Chinese).
[17] YAN X D.Simulation analysis of movable laser etching of resin matrix composite[D]. Lanzhou: Lanzhou University of Technology, 2017: 12-62(in Chinese).