[1] YANG Z B, LIU A J, YANG R Y, et al. Interface microstructure and formation mechanism of diamond abrasive laser brazed with Ni-Cr solder[J]. Rare Metal Materials and Engineering, 2016, 45(5): 1152-1156. doi: 10.1016/S1875-5372(16)30111-4
[2] CHATTOPADHYAY A K, CHOLLET L, HINTERMANN H E. Experomental investigation on induction brazing of diamond with Ni-Cr hardfacing alloy under argon atmosphere[J]. Journal of Materials Science, 1991, 26(18): 5093-5100. doi: 10.1007/BF00549897
[3] CHATTOPADHYAY A K, CHOLLET L, HINTERMANN H E. On performance of brazed bonded monolayer diamond grinding wheel[J]. Annals of the CIRP, 1991, 40(1): 347-350. doi: 10.1016/S0007-8506(07)62003-4
[4] HUANG G Q, HUANG J R, ZHANG M Q, et al. Fundamental a-spects of ultrasonic assisted induction brazing of diamond onto 1045 steel[J]. Journal of Materials Processing Technology, 2018, 260: 123-136. doi: 10.1016/j.jmatprotec.2018.05.021
[5] LU J B, TANG F, MENG P, et al. Thermal damage analysis of Ni-Cr alloy vacuum brazed diamond[J]. Transactions of the China Welding Institution, 2010, 31(8): 25-28(in Chinese).
[6] REN H Zh, LI Q L, LEI W N. Research status of induction brazing technology for superhard abrasive[J]. Hot Working Technology, 2017, 46(13): 15-18(in Chinese).
[7] LIU T M, TANG X H, LI L B, et al. The experimental study on CO2 laser sintering of diamo-nd fine powder compact[J]. Laser Technology, 2006, 30(3): 244-247(in Chinese).
[8] HUANG S F, TSAI H L, TIAN S. Laser brazing of diamond grits using a Cu-15Ti-10Sn brazing alloy[J]. Materials Transactions, 2002, 43(10): 2604-2608. doi: 10.2320/matertrans.43.2604
[9] YANG Zh B, XU J H, LIU A J. Microstructure analysis of laser diamond grains interface[J].Transactions of the China Welding Institution, 2010, 31(10): 9-12(in Chinese).
[10] YANG Zh B, XU J H, FU Y C. Microstructure of laser brazed diamond grits[J]. Materials for Mechanical Engineering, 2007, 31(5): 17-19(in Chinese).
[11] YANG W H, TANG X H, QIN Y X, et al. High power CO2 laser brazing of diamond grits[J]. Chinese Journal of Lasers, 2007, 34(4): 569-573(in Chinese).
[12] HUANG J R, WANG Y D, HUANG G Q. Feasibility analysis of laser brazing diamond with Fe-based filler alloy[J]. Superhard Material Engineering, 2018, 30(3): 7-11(in Chinese).
[13] GUO J Y, CHEN Sh Y, HUANG G Q. Study of the technology of pulsed laser brazing of diamond[J]. Superhard Material Engineering, 2016, 28(3): 7-10(in Chinese).
[14] GUO X Q. Study on welding technology for diamond tools[J]. Diamond and Abrasives Engineering, 2007, 159(3): 40-42(in Chin-ese).
[15] ZHAO Y R. Process and mechanism of low temperature soldering of sapphire with Sn-based solder[D]. Harbin: Harbin Institute of Technology, 2017: 15-57(in Chinese).
[16] ZHAO W. Mechanism of ultrasonic assisted reaction epitaxy growth of sapphire and study of Al/Al2O3 composite seam brazing[D]. Harbin: Harbin Institute of Technology, 2016: 16-62(in Chinese).
[17] YAMAZAKI T, SUZUMURA A. Role of the reaction product in the solidification of Ag-Cu-Ti filler for brazing diamond[J]. Journal of Materials Science, 1998, 33(5): 1379-1384. doi: 10.1023/A:1004370919502
[18] YAMAZAKI T, SUZUMURA A. Relationship between X-ray diffraction and unidirectional solidification at interface between diamond and brazing filler metal[J]. Journal of Materials Science, 2000, 35(24): 6409-6416.
[19] YAMAZAKI T, SUZUMURA A. Reaction products at brazed interface between Ag-Cu-V filler metal and diamond(111)[J]. Journal of Materials Science, 2006, 41(19): 6409-6416. doi: 10.1007/s10853-006-0707-2
[20] JIANG C. First-principles study of structural, elastic, and electronic properties of chromium carbides[J]. Applied Physics Letters, 2008, 92(4): 041909. doi: 10.1063/1.2838345
[21] PERDEW J P, BURKE K, WANG Y. Generalized gradient approximation for the exchange correlation hole of a many-electron system[J]. Physics Review, 1996, B54(23): 16533-16539.
[22] LI Y F, GAO Y M, XIAO B, et al. The electronic, mechanical properties and theoretical hardness of chromium carbides by first-principles calculations[J]. Journal of Alloys and Compounds, 2011, 509(17): 5242-5249. doi: 10.1016/j.jallcom.2011.02.009
[23] LU J B, ZHANG W X, ZHANG L, et al. Effect on microstructure for adding graphite to Ni-Cr alloy when brazing diamond abrasive in controlled atmosphere[J]. Journal of Mechanical Engineering, 2014, 50(4): 80-84(in Chinese). doi: 10.3901/JME.2014.04.080
[24] WANG P P, GUO H, ZHANG X M, et al. Interfacial reaction of dia-mond/copper composites[J]. Chinese Journal of Rare Metals, 2015, 39(4): 308-313(in Chinese).
[25] BAI L X, WU P F, LI Ch, et al. Ultrasonic cavitation in thin liquid layers[J]. Journal of Applied Acoustics, 2018, 37(5): 614-635(in Chinese).