[1] YAN J X. Laser weapons [M]. Beijing: National Defense Industry Press, 2016: 29-30(in Chinese).
[2] XU J, LIANG M, LIU D Sh, et al. Research on power factor correction technology of pulse laser system charging power supply[J]. Laser Technology, 2020, 44(6): 732-737(in Chinese).
[3] LI B, LI B T, HUANG B, et al. Design of high reliability pulse xe-non lamp power supply[J]. High Power Laser and Particle Beams, 2017, 29(6): 065004(in Chinese).
[4] KIM K. Time-dependent one-dimensional modeling of pulsed plasma discharge in a capillary plasma device[J]. IEEE Transactions on Plasma Science, 2003, 31(4): 729-735. doi: 10.1109/TPS.2003.815472
[5] LIU F C, ZHAO X J, HE S Ch. Design and experimental analysis of DSP-based PFN trigger timing control system[J]. High Voltage Engineering, 2013, 39(7): 1778-1783(in Chinese).
[6] LIU F C, ZHAO X J, HE S Ch. The design of a DSP-based PFN tri-gger timing control system and the experimental study[C]//16th International Symposium on Electromagnetic Launch Technology (EML). New York, USA: IEEE, 2012: 1-6.
[7] CHANG D I, LONG B, CHIU D, et al. A pulse forming network and test fixture for screening electrothermal chemical candidate propellants[J]. IEEE Transactions on Magnetics, 1993, 29(1): 919-922. doi: 10.1109/20.195700
[8] LI Zh Q, YANG J H, ZHANG J D, et al. A compact repetitive PFN-marx generator[J]. High Power Laser and Particle Beams, 2016, 28(1): 015013(in Chinese).
[9] TIAN J Ch, SONG X Q, LI Z L. Theoretical analysis and calculation of HPM pulse forming network[J]. Journal of Spacecraft TT&C Technology, 2003, 22(3): 72-74(in Chinese).
[10] WANG Ch W, LI H T. Theoretical analysis and design of the trapezoidal pulse forming network[J]. High Power Laser and Particle Beams, 2018, 30(3): 035005(in Chinese).
[11] TANG Y L, LIU J, LI B M. Research on discharge timing control of multi-parameter pulse forming network[J]. Journal of Physics: Conference Series, 2021, 1721(1): 012043. doi: 10.1088/1742-6596/1721/1/012043
[12] SCHOLFIELD D W, BUTCHER M D, HILKO B, et al. Vacuum switch performance in a 1.2MJ pulse forming network[J]. The Review of Scientific Instruments, 2008, 79(1/2): 024703.
[13] LI X Q, ZHAO J, WU H G, et al. Design of xenon flash lamp su-pply adopting integrally triggering and pre-ionization[J]. High Power Laser Particle Beams, 2014, 26(7): 075004(in Chinese). doi: 10.3788/HPLPB20142607.75004
[14] CAO Sh G, SHAO R Y, LIN W Zh, et al. Study on the dynamic model of high power flash lamp for simulation with Pspice. A-pplied Laser, 2006, 26(6): 457-459(in Chinese).
[15] ZHAO Y Q, DONG P F, MIAO P L, et al. Study on discharge process of high performance xeon flash lamp[J]. Analytical Instrumentation, 2016, 206(4): 44-48(in Chinese).
[16] WANG Ch W, LI H T. Design of trapezoidal pulse forming network based on simplex optimization method [J]. High Power Laser and Particle Beams, 2020, 32(6): 065001(in Chinese).
[17] LIN Q H, LI B M. Analysis on surge process generated in high power pulse forming network with capacitor energy storage system[J]. Journal of Nanjing University of Science and Technology, 2008, 32(6): 729-732(in Chinese).
[18] KOECHNER W S. Solid-state laser engineering[M]. Beijing: Science Press, 2002: 257-267(in Chinese).
[19] CHEN D G. Some problem in design of design of pulse forming network[J]. Modern Electronics, 1998, 63(2): 22-27(in Chinese).
[20] ZHAO J, LI B T, WANG Ch W, et al. Design of pulsed power circuit based on waveform analysis[J]. High Power Laser and Particle Beams, 2017, 29(12): 065004(in Chinese).
[21] LONG X F. Investigation of marx-PFN[D]. Changsha: National University of Defense Technology, 2007: 5-21(in Chinese).
[22] LIU X S. High pulsed power technology[M]. Beijing: National Defense Industry Press, 2005: 116-119(in Chinese).
[23] ZHOU T M. Principle design of light source[M]. Shanghai: Fudan University Press, 2006: 387-391(in Chinese).
[24] YU Y J, FAN P Zh, FANG W G. Measurement of electrode drop of pulsed xenon lamp[J]. Laser Journal, 1979, 6(5): 41-44(in Chinese).