[1] DAI Y T,XU G,CUI J L,et al.Micro etching of GaN-based semiconductor materials using 157nm laser[J].Chinese Journal of Lasers,2009,36(12):3138-3142(in Chinese).
[2] DAI Y T,CUI J L,XU G,et al.Influence of laser parameters on etching performance during 157nm laser micromachining[J].Laser Technology,2011,35 (1):36-85(in Chinese).
[3] CHEN L,YANG Y Q.Mechanism and application of laser polishing[J].Surface Technology,2003,32(5):49-52(in Chinese).
[4] OBATA K,SUGIOKA K,AKANE T,et al.Influence of laser fluence and irrdiation timing of F2 laser on ablation properties of fused silica in F2-KrF excimer laser multi-wavelength excitation process[J].Applied Physics,2001,A73 (6):755-759.
[5] MUTAPCIC E,IOVENITTI P,HAYES J P.A 3D-CAM system for quick prototyping and microfabrication using excimer laser micromachining[J].Microsystem Technologies,2005,12(1/2):128-136.
[6] FUJIKAWA T,SHIBASKI Y,ANDO S,et al.New photoresist materials for 157nm lithography[J].Chemical of Materials,2003,15(7):1512-1517.
[7] LI W L,LI Y,LI W.Mechanism study of silica ablating on photonic crystal fiber by 157nm laser[J].Laser Technology,2006,30(6):601-604 (in Chinese).
[8] DUG J,CHEN T,ZUO T Ch,et al.Lens array homogenizer for excimer lasers[J].Journal of Optoelectronics · Laser,2005,16(3):279-281 (in Chinese).
[9] ZHAO Z Y,HOU D S,DONG X Ch,et al.Research on etching properties of polycarbonate by KrF excimer laser[J].Opto-Electronic Engineering,2004,31 (2):4-7(in Chinese).
[10] FU G S,CHU L Z,ZHOU Y,et al.Influence of pulse repetition rate on morphology of nanocrystalline silicon film prepared by pulsed laser deposition[J].Chinese Journal of Laser,2005,32(9):1254-1257(in Chinese).
[11] DEGN H Y,RAO Y J,RAN Z L,et al.Photonic crystal fiber based Fabry-Pérot sensor fabricated by using 157nm laser micromachining[J].Acta Optica Sinica,2008,28(2):254-258(in Chinese).