[1] 任鹏伟. 三类不同耐蚀性材料在深海高压下的磨蚀研究[D]. 北京: 北京科技大学, 2022.REN P W. Study of tribocorrosion of three differenet corrosion reisistance materials under deep-sea high pressure[D]. Beijing: University of Science and Technology Beijing, 2022(in Chinese).
[2] 何晓宇, 夏宏杰, 温哲华, 等. 我国海洋钢结构腐蚀现状及防护对策概述[J]. 材料保护, 2022, 55(11): 149-158.HE X Y, XIA H J, WEN Zh H, et al. Summary of the corrosion status and protection measures of marine steel structure in China[J]. Materials Protection, 2022, 55(11): 149-158(in Chinese).
[3] 杜辉辉, 赵运才. 激光重熔喷涂涂层研究进展[J]. 激光与红外, 2018, 48(11): 1330-1336. doi: 10.3969/j.issn.1001-5078.2018.11.002DU H H, ZHAO Y C. Research progress of laser remalting coating[J]. Laser & Infrared, 2018, 48(11): 1330-1336(in Chinese). doi: 10.3969/j.issn.1001-5078.2018.11.002
[4] 张津超, 石世宏, 龚燕琪, 等. 激光熔覆技术研究进展[J]. 表面技术, 2020, 49(10): 1-11.ZHANG J Ch, SHI Sh H, GONG Y Q, et al. Research progress of laser cladding technology[J]. Surface Technology, 2020, 49(10): 1-11(in Chinese).
[5] 陈冠秀, 安立周, 王硕, 等. 激光熔覆技术的研究概况及其发展趋势[J]. 机电产品开发与创新, 2022, 35(5): 15-18.CHEN G X, AN L Zh, WANG Sh, et al. Research overview and development trend of laser cladding technology[J]. Development & Innovation of Machinery & Electrical Products, 2022, 35(5): 15-18 (in Chinese).
[6] GUO C, CHEN J M, ZHOU J S, et al. Effects of WC-Ni content on microstructure and wear resistance of laser cladding Ni-based alloys coating[J]. Surface & Coatings Technology, 2012, 206(8/9): 2064-2071.
[7] WENG Z K, WANG A H, WU X H, et al. Wear resistance of diode laser-clad Ni/WC composite coatings at different temperatures[J]. Surface & Coatings Technology, 2016, 304: 283-292.
[8] ALIDOKHT S A, VO P, YUE S, et al. Cold spray deposition of Ni and WC-reinforced Ni matrix composite coating[J]. Journal of Thermal Spray Technology, 2017, 26(8): 1908-1921. doi: 10.1007/s11666-017-0636-4
[9] 李福泉, 冯鑫友, 陈彦宾. WC含量对WC/Ni60A激光熔覆层微观组织的影响[J]. 中国激光, 2016, 43(4): 0403009.LI F Q, FENG X Y, CHEN Y B. Influence of WC content on microstructure of WC/Ni60A laser cladding layer[J]. Chinese Journal of Lasers, 2016, 43(4): 0403009(in Chinese).
[10] 王杉杉, 师文庆, 吴腾, 等. WC质量分数对激光熔覆Ni基涂层组织和性能的影响[J]. 激光技术, 2023, 47(4): 463-468. doi: 10.7510/jgjs.issn.1001-3806.2023.04.004WANG Sh Sh, SHI W Q, WU T, et al. Effect of WC mass fraction on microstructure and properties of laser cladding Ni-based coatings[J]. Laser Technology, 2023, 47(4): 463-468(in Chinese). doi: 10.7510/jgjs.issn.1001-3806.2023.04.004
[11] 王予彬. 陶瓷颗粒增强Ni60A激光熔覆层的组织与性能的研究[D]. 济南: 山东大学, 2012.WANG Y B. Study on microstructure and properties of Ni60A laser cladding layer strengthened by ceramic particles[D]. Ji'nan: Shandong University, 2012(in Chinses).
[12] 李泽邦. Ni基复合粉末激光熔覆层组织与性能的研究[D]. 济南: 山东大学, 2013.LI Z B. Study on microstructure and properties of Ni-bassed composite laser cladding layers[D]. Ji'nan: Shandong University, 2013(in Chinses).
[13] 鞠怀成. 激光熔覆制备Ni/WC梯度涂层组织及耐磨耐蚀性能研究[D]. 沈阳: 沈阳工业大学, 2022.JU H Ch. Study on microstructure, wear resistance, and corrosion resistance of Ni/WC Gradient coating prepared by laser cladding[D]. Shenyang: Shenyang University of Technology, 2022(in Chinese).
[14] ZHANG J Q, LEI J B, GU J Z, et al. Effect of WC-12Co content on wear and electrochemical corrosion properties of Ni-Cu/WC-12Co composite coatings deposited by laser cladding[J]. Surface & Coatings Technology, 2020, 393: 125807.
[15] 李倩, 陈发强, 王茜, 等. 激光熔覆WC增强Ni基复合涂层的研究进展[J]. 表面技术, 2022, 51(2): 129-143.LI Q, CHEN F Q, WANG Q, et al. Research progress of laser-cladding WC reinforced Ni-base composite coating[J]. Surface Technology, 2022, 51(2): 129-143(in Chinese).
[16] 王成磊, 高原, 张光耀. CeO2对铝合金表面激光熔覆增材制造Ni60合金层组织及耐蚀性影响[J]. 稀有金属材料与工程, 2017, 46(8): 2306-2312.WANG Ch L, GAO Y, ZHANG G Y. Effect of CeO2 addition on interface structure and corrosion resistance of laser cladding additive manufactured Ni60 alloy layers on the surface of Al alloys[J]. Rare Metal Materials and Engineering, 2017, 46(8): 2306-2312(in Chinese).
[17] MOHAMMED S, RAJAMURE R S, ZHANG Z, et al. Tailoring corrosion resistance of laser-cladded Ni/WC surface by adding rare earth elements[J]. The International Journal of Advanced Manufacturing Technology, 2018, 97(9/12): 4043-4054.
[18] SHU D, DAI S C, WANG G, et al. Influence of CeO2 content on WC morphology and mechanical properties of WC/Ni matrix composites coating prepared by laser in-situ synthesis method[J]. Journal of Materials Research and Technology, 2020, 9(5): 11111-11120. doi: 10.1016/j.jmrt.2020.07.104
[19] 何骅波, 戴姣燕, 杨梦梦, 等. 稀土CeO2对Ni60A激光熔覆层组织与性能的影响[J]. 兵器材料科学与工程, 2017, 40(6): 83-87.HE H B, DAI J Y, YANG M M, et al. Effect of CeO2 on microstructures and properties of Ni60A laser cladding layer[J]. Ordnance Material Science and Engineering, 2017, 40(6): 83-87(in Chinese).
[20] LI M X, HE Y Z, YUAN X M. Effect of nano-Y2O3 on microstructure of laser cladding cobalt-based alloy coatings[J]. Applied Surface Science, 2006, 52(8): 2882-2887.
[21] 李瑞, 岳旭, 董轶, 等. 大规格纯钛细晶棒材的锻造工艺[J]. 材料热处理学报, 2019, 40(4): 28-33.LI R, YUE X, DONG Y, et al. Forging process of large size pure titanium fine grain bar[J]. Transactions of Materials and Heat Treatment, 2019, 40(4): 28-33(in Chinese).
[22] 缪小进, 夏思海, 武美萍, 等. 添加CeO2对铝合金表面激光熔覆铝钛熔覆层性能的影响[J]. 金属热处理, 2021, 46(9): 234-240.MIAO X J, XIA S H, WU M P, et al. Effect of adding CeO2 on properties of Al-Ti laser clad coating on aluminum alloy[J]. Heat Treatment of Metals, 2021, 46(9): 234-240(in Chinese).
[23] 肖奇, 孙文磊, 刘金朵, 等. Ni60A/WC激光熔覆涂层表面抗蚀行为[J]. 材料导报, 2021, 35(8): 8146-8150.XIAO Q, SUN W L, LIU J D, et al. Surface corrosion behavior of Ni60A/WC laser cladding coating[J]. Materials Reports, 2021, 35(8): 8146-8150(in Chinese).
[24] 李刚, 张井波, 温颖, 等. Ni35掺杂高碳铬铁粉激光熔覆涂层的组织和性能[J]. 稀有金属材料与工程, 2018, 47(6): 1830-1835.LI G, ZHANG J B, WEN Y, et al. Microstructure and properties of coating of Ni35 powder doped with high carbon ferrochrome powder by laser cladding[J]. Rare Metal Materials and Engineering, 2018, 47(6): 1830-1835(in Chinese).
[25] 徐祺昊. 稀土Ce对H13钢组织与热疲劳性能的影响[D]. 包头: 内蒙古科技大学, 2022.XU Q H. Effect of rare earth Ce on microstructure and thermal fatigue properties of H13 steel[D]. Baotou: Inner Mongolia University of Science & Technology, 2022(in Chinese).
[26] 张梁. 激光熔覆304L+La2O3涂层组织及性能研究[D]. 青岛: 青岛理工大学, 2022.ZHANG L. Microstruture and properties of laser cladding 304L+La2O3 coating. Master's thesis[D]. Qingdao: Qingdao University of Technology, 2022(in Chinese).
[27] YANG Z Z, HAO H, GAO Q, et al. Strengthening mechanism and high-temperature properties of H13+WC/Y2O3 laser-cladding coatings[J]. Surface & Coatings Technology, 2021, 405: 126544.
[28] 袁庆龙, 冯旭东, 曹晶晶, 等. 激光熔覆镍基合金涂层微观组织研究[J]. 中国激光, 2010, 37(8): 2116-2120.YUAN Q L, FENG X D, CAO J J, et al. Research on microstructure of Ni-base alloy coating by laser cladding[J]. Chinese Journal of Lasers, 2010, 37(8): 2116-2120(in Chinese).
[29] FARAHMAND P, LIU S, ZHANG Z, et al. Laser cladding assisted by induction heating of Ni-WC composite enhanced by nano-WC and La2O3[J]. Ceramics International, 2014, 40(10): 15421-15438. doi: 10.1016/j.ceramint.2014.06.097
[30] ZHAO W, KONG D J. Effects of laser power on immersion corrosion and electrochemical corrosion performances of laser thermal sprayed amorphous AlFeSi coatings[J]. Applied Surface Science, 2019, 481: 161-173. doi: 10.1016/j.apsusc.2019.03.047
[31] LU J Z, HAN B, CUI C Y, et al. Electrochemical and pitting corrosion resistance of AISI 4145 steel subjected to massive laser shock peening treatment with different coverage layers[J]. Optics & Laser Technology, 2017, 88: 250-262.
[32] 张伟华. 激光熔覆AlCoCrFeNixMoy高熵合金涂层组织与耐蚀性研究[D]. 鞍山: 辽宁科技大学, 2021.ZHANG W H. Microstructure and corrosion resistance of AlCoCrFeNixMoy high entropy alloy coating by laser cladding[D]. Anshan: University of Science and Technology Liaoning, 2021(in Chinese).
[33] 朱成才. Ni-TiC复合粉体的制备及激光熔覆涂层性能的研究[D]. 徐州: 中国矿业大学, 2020.ZHU Ch C. Preparation of Ni-TiC powder and study for the performance of laser cladding coating[D]. Xuzhou: China University of Mining and Technology, 2020(in Chinese).
[34] CUI C, WU M P, MIAO X J, et al. Microstructure and corrosion behavior of CeO2/FeCoNiCrMo high-entropy alloy coating prepared by laser cladding[J]. Journal of Alloys and Compounds, 2022, 890: 161826. doi: 10.1016/j.jallcom.2021.161826
[35] NATARAJAN J, YANG C H, KARUPPASAMY S S. Investigation on microstructure, nanohardness and corrosion response of laser cladded colmonoy-6 particles on 316L steel substrate[J]. Materials, 2021, 14(20): 6183. doi: 10.3390/ma14206183
[36] YANG X T, LI X Q, YANG Q B, et al. Effects of WC on microstructure and corrosion resistance of directional structure Ni60 coatings[J]. Surface & Coatings Technology, 2020, 385: 125359.