[1] SIL VERS H J,Jr,WACHTELL S.Perforation,welding and cutting plastic filma with a continuous CO2laaer[R].Pennsylvania:PA State University,1970:88-97.
[2] JAMES D,ARTHUR G.Laser transnusaion relding of thennoplastics-part Ⅰ:temperature and pressure modeling[J].Journal of Manufacturing Science and Enginemng,2007,129(10):849-858.
[3] MAYBOUDI L S A,BIRK M,ZAK G,et al.Laser transmissiom welding of a lap-joint:thermal imagining observations and three-dimensional finite element modeling[J].Journal of Heat Transfer,2007,129(9):1177-1186.
[4] ELHEM G,GIIJSEPPE C,STEPHANE A,Laser diode transnussion welding of polypropylene:geometrical and microstructure characterization of weld[J].Materials and Design,2009,30(7):2745-2751.
[5] BAPPA A,DIPTEN M,DIPANKAR B,et al.Prediction of weld srrength and aeam width for laser transmisaion welding of thermoplastic using response surface methodology[J].Optics and Laser Technolo gy,2009,41(8):956-967.
[6] YUAN H,LAI J J,HE Y G.Experimental study on laser welding of thermoplastics[J].Optics and Optoelectronic Technology,2005,3(1):18-21(in Chinese).
[7] WANC Y L,CAI Y,WANG J C.Technology oflaser welding plastic[J].Applied Laser,2006,26(2):93-96(in Chinese).
[8] WANG X,ZHANG H Z,DINC G M.Investigation on influence of additive on welding quality of laaer transmission welding plastics[J].Applied Laser,2007,27(4):314-317(in Chinese).
[9] LIU H X,ZHANC H Z,JI J Q,et al.Methods and present status of laser welding of plastics[J].Laser Technology,2008,32(2):166170(in Clunese).
[10] WANG J C,QIN L M,LI J.Technics and microcosmic analysis research of PMMA/ABS thermoplastic laser transmission welding[J].Applied Laser,2008,28(4):287-291(in Chinese).
[11] WANG X,YANG K,ZHANG H Z.Experiment research on laser transnussion welding of two different thermoplastics[J].Transactions of the China Welding Institution,2009,30(5):97-100(in Chinese).
[12] SHI WQ,YANG Y Q,HUANG Y L,et al.Simulation of the temperature field in rapid prototyping of selective laser melting[J].Laser Technology,2008,32(4):410-412(in Chinese).