[1] COOPER K G.Rapid prototyping technology:selection and application,mechanical engineering[M].New York:Marcel Dekker,2001:1-4.
[2] JACOBS P F.Rapid prototyping manufacturing fundamentals of stereo-lithography[M].New York:Scociety of Manufacturing Engineers,1992:381-416.
[3] HUANG J P.Using FCDM system for fabricating tissue engineering scaffolds[D].Taipei:Central University,2005:5-14(in Chinese).
[4] HULBERT S F,BOKROS J C,HENCH L L,et al.Ceramics in clinical applications,past,present and future[M].Amsterdam:Elsevier Science Publishers,1987:3-27.
[5] CHIANG Y W.Application of orous oly(L-lactide)/hydroxyapatite composites as bioabsorbable materials:preparation and its properties[D].Taipei:Taipei Medical University Institutional Reposity,2000:1-12(in Chinese).
[6] PENG R Sh,WANG J B,YAO Q Zh.Application study of rapid prototyping manufacturing in medical[J].Chinese Journal of Lasers,2005,29(3):87-88(in Chinese).
[7] CHUA C K,LEONG K F,LIM C S.Rapid prototyping:principles and applications[M].2nd ed.Singapore:World Scientific Publishing Company,2003:35-193.
[8] ZHANG J H,ZHAO J F,TIAN Z J,et al.Experimental research of selective laser sintering of nano-Al2O3[J].Chinese Journal of Lasers,2004,28(5):455-458(in Chinese).
[9] ZHU L Q.The principle and advantage of an innovative line scanning SLS RP system[J].Chinese Journal of Lasers,2002,22(3):305-308(in Chinese).
[10] CHAI C S,BEN-NISSAN B.Bioactive nanocrystalline sol-gel hydroxyapatite coating[J].Journal of Materials Science:Materials in Medicine,1999,10(8):465-469.
[11] SUN J S,TSUANG Y H,LIAO C J,et al.The effects of calcium phosphate particles on the frowth of osteoblasts[J].Journal of Biomedical Materials Research,1997,37(3):324-334(in Chinese).
[12] RATNER B D,HOFFMAN A S,SCHOEN F J,et al.Biomaterials science-an introduction to materials in medicine[M].San Diego:Academic Press,1996:105-118.
[13] de GROOT K.Bioceramics of calcium phosphate[M].Florida:CRC Press,1983:79-97.
[14] KIM S S,UTSUNOMIYA H,KOSKI J A,et al.Survival and function of hepatocytes on a novel three-dimensional synthetic biodegradable polymer scaffold with an intrinsic network of channels[J].Annals of Surgery,1998,228(1):8-13.
[15] ZELTINGER J,SHERWOOD J K,GRAHAM D A,et al.Effect of pore size and void fraction on cellular adhesion,proliferation,and matrix deposition[J].Tissue Engineering,2001,7(5):557-572.
[16] ZEIN I,DIETMAR W H,KIM Ch T,et al.Fused deposition modeling of novel scaffold architectures for tissue engineering applications[J].Biomaterials,2002,23(4):1169-1185.
[17] KALITA S J,BOSE S,HOSICK H L,et al.Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling[J].Materials Science and Engineering,2003,C23(5):611-620.
[18] XIONG Zh,YAN Y N,WANG Sh G,et al.Fabrication of porous scaffolds for bone tissue engineering via low-temperature deposition[J].Scripta Materialia,2002,11(7):771-776.
[19] AUG T H,SULTANA F S A,HUTMACHER D W,et al.Fabrication of 3-D chitosan-hydroxyapatite scaffolds using a robotic dispensing system[J].Materials Science and Engineering,2002,C20(1/2):35-42.
[20] MA B G,LIN L L,HUANG X X,et al.Bone tissue engineering using β-tricalcium phosphate scaffolds fabricated via selecting laser sintering[J].International Federation for Information Processing,2006,207:710-716.
[21] WILLIAMS J M,ADEWUNMI A,SCHEK R M,et al.Bone tissue engineering using polycaprolactone scaffold fabricated via selective laser sintering[J].Biomaterials,2005,26(23):4817-4827.
[22] LAM C X F,MO X M,TEOH S H,et al.Scaffold development using 3-D printing with a starch-based polymer[J].Materials Science and Engineering,2002,C20(1/2):49-56.
[23] LIU F H.Method and equipment of forming porous bio-ceramic bone scaffold:Taiwan,098135507[P].2009(in Chinese).
[24] DELIGIANNI D D,KATSALA N D,KOUTSOUKOS P G,et al.Effect of surface roughness of hydroxyapatite on human bone marrow cell adhesion,proliferation,differentiation and detachment strength[J].Biomaterials,2001,22(1):87-96.