[1] HONG L,WU G.Laser basic manufacturing technology[M].Beijing:China Communications Press,2007:259-300(in Chinese).
[2] ZHANG G Sh.Modern laser manufacturing technology[M].Beijing:Chemical Industry Press,2006:135-212(in Chinese).
[3] LIU X B,WANG H M.The influence of processing parameters on laser cladding composite coatings on TiAl intermetallic alloy[J].Laser Technology,2006,30(1):67-69(in Chinese).
[4] BI G J,ANDRES G,KONRAD W,et al.Identification and qualification of temperature signal for monitoring and control in laser cladding[J].Optics and Lasers in Engineering,2006,44(12):1348-1359.
[5] YU D,ZHONG M L,LIU W J,et al.Real-time monitoring research of melt pool images in laser cladding process[J].Chinese Journal of Lasers,2007,34(sl):86-90(in Chinese).
[6] CHEN J,TAN H,YANG H O,et al.Research on the molten pool behavior in the process of laser rapid forming through in situ observation technique[J].Applied Laser,2005,25(2):77-80(in Chinese).
[7] WANG Ch M.Multi-sensor real-time quality diagnosis and its theoretical basis for laser welding[D].Wuhan:Huazhong University of Science and Technology,2005:128-133(in Chinese).
[8] LIU J H,ZHU Sh G.Image processing on high-speed photography of CO2 laser welding plasma[J].Applied Laser,2002,22(6):342-344(in Chinese).
[9] MUKHERJEE S,CHAKRABORTY S,MANNA L.Effect of process parameters on laser surface hardening of plain carbon eutectoid steel[J].Computers Materials Continua,2009,10(3):217-228.
[10] ARIF A.Effect of input variability on the quality of laser shock processing[J].Journal of Mechanical Science and Technology,2009,23(10):2603-2611.