[1] YANG Y Q,ZHANG C H.Synthesis of TiNi-TiN gradient coating by hybrid method of laser cladding and laser nitriding[J].Chinese Journal of Nonferrous Metal,2006,16(2):213-218(in Chinese).
[2] GUSAROV A V,LAOUI T,FROYEN L,et al.Contact thermal conductivity of a powder bed in selective laser sintering[J].International Journal of Heat and Mass Transfer,2003,17(46):1103-1109.
[3] SHI W Q,YANG RY Q.Laser beam's focused properties and its trans mission and frans formation in selective laser melting[J].Laser Technology,2008,32(3):308-311.
[4] ZHAO B J,SHI F Zh.Modeling of selective laser sintering for PC powder[J].Journal of Beijing University of Aeronautics and Astronautics,2002,28(6):660-663(in Chinese).
[5] WILLIAMS J D,DECKARD C R.Advances in molding the effects of selective parameters on the SLS Process[J].Rapid Prototyping Journal,1998,4(2):90-100.
[6] BAI P A,HUANG Sh H,CHENG J.Numerical simulation of temperature field during laser sintering of resin-based prototyping composites[J].Journal of Basic Science and Engineering,2002,10(1):68-72(in Chinese).
[7] SHEN X F.Numerical simulation and sintering zone prediction of direct laser sintering of multi-component metal powders[D].Chengdu:Sichuan University,2005:78(in Chinese).
[8] SONG L S,SHI G Q,LI Zh G.Simulation of laser drilling temperature field by using ANSYS[J].Acta Armamentarii,2006,27(5):879-882(in Chinese).
[9] ZHANG Ch H.ANSYS8.0 thermal analysis tutorial[M].Beijing:China Railway Press,2005:81-85(in Chinese).
[10] HAN G M,ZHAO J,LI J Q.Dynamic simulation of the temperature field of stainless steel laser welding[J].Materials & Design,2007,15(28):240-245.
[11] WU W H,YANG Y Q,HUANG Y L.Direct manufacturing of Cu-based alloy parts by selective laser melting[J].Chinese Optics Letters,2007,5(1):37-40.